How Long of Bunks for a 12 Foot Long Porta Boat
Published 10/04/2016
Question:
My trailer has 3ft outside d between the front and back crossbeam and will be used to haul a light 12ft boat Porta_boat . How long should the bunk be? not sure how much overhang This is an old trailer for a flat-bottom boat, so it never had bunks
asked by: Cheryl
Expert Reply:
The general rule of thumb is that you want your bunks to extend completely to the stern (rear) of the boat, or even and inch or two beyond. That way the transom has plenty of support as you drive down the road. The bunks can extend as far forward as you like really, but I think you'll find that about half the length of the boat is usually enough as the front of the boat is generally supported by the bow stop on the trailer.
For a 12 foot boat like your Porta Boat I would go with 6 foot long bunks like the # CE27840 for a pair.
Product Page this Question was Asked From
CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair
- Boat Trailer Parts
- Bunks
- Bunk Boards
- 3-3/4 Inch Tall
- 1-3/4 Inch Wide
- 72 Inch Long
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Ultimate Overview of the Single-Axle Trailer Hanger Kit for 1-3/4" Slipper Springs
- Video: Checking Out the U-Bolt Plate for 2" Diameter Axle, 1-3/4" Wide Spring
- Video: Hands-On with the CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards
- Shop: Trailer Hitch
- Shop: CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair
- Shop: Replacement U-Bolt for 2" Wide, Square Axles - 7/16" Diameter - Zinc Plated
- Search Results: slipper spring hangers
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Replacement U-Bolt for 2" Wide, Square Axles - 1/2" Diameter - Zinc Plated
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Shop: 2" Square Trailer U-Bolt (Qty 2)
- Shop: U-Bolt Plate for 2" Square Axle - 1-3/4", 2" Springs - 9/16" Bolts
- Q&A: Bolt Hole Dimensions Fulton Fas-Lok Coupler # F343000301
- Search Results: marine grade carpet
- Search Results: bunk boards
- Search Results: fenders
- Search Results: trailer suspension parts
- Search Results: leaf springs
- Search Results: leaf spring hanger kit
- Video: Installing the Curt Trailer Hitch Receiver on a 2025 Toyota RAV4
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Article: How to Choose the Right Trailer Hitch Class
on Boat Trailer Parts
