Search: bunk boards   >  

Don't worry Dave, we have everything you need. The Malone LowBed MicroSport Trailer #MPG464-LB will allow you to carry boats up to 20' long and can support up to 500lbs on the crossbars. So with the Bunk Kit #MPG561 and 2 Bike Racks #MPG2100…

Boat trailer bunk boards like CE Smith #CE27840 can be secured to swivel brackets like #CE10000G-4 using either galvanized or stainless steel hardware intended for wood. This is not included so you will source the preferred hardware locally. Lag…

We can piece together a Malone Lowbed trailer by first starting with the part #MPG464-LB and then a single bunk kit part #MPG561 and then the spare kit part #MPG465 and you'd be set. There isn't a kit with just the parts you are looking for…

The Bunk Kit for Malone Trailers #MPG561 is designed to fit the 1-1/4" Crossbars #MPG4001 currently used on Malone trailers. You can still use them with your crossbars but will need to account for the difference in size with some flat…

The Malone MegaWing Kayak Carrier #MPG207 referenced in your question is a great option for your Old Town Fishing Kayak that weighs around 120 pounds. The MegaWing is made specifically for heavier fishing kayaks like this and its 150 pound weight…

Your Old Town Sportsman 136 kayak is 158 lbs, so for two of them I recommend the Malone LowBed MicroSport Trailer #MAL25FR. This comes with the kayak bunks for 2 kayaks and has the crossbars with integrated d-rings. This has a per boat restriction of…

The Square U-Bolts #381344UB are 1-3/4" wide on the interior of the 3/8" U-bolt. These are 4" long from the inside of the U to the end of the threads. They can be used in place of the U-Bolts that came with the Malone Crossbar…

You'll be pleased to hear the base of the: -Malone Crossbar Conversion Kit for Standard Utility Trailer #MPG475 measures 32" before the bar starts to curve upwards. I have also attached an image showing this measurement for you to check…

That's an excellent question, and you've got a good eye because the crossbars are about an inch lower than the fenders on the Malone 2 Tier LowBed MicroSport Trailer - 78" Crossbars #MPG464-LBT. So if you wanted to lay lumber completely…

I have another option for you, but you are correct that the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks #CE48870 can only handle boats up to 14' long. You instead would need to use the Malone LowBed MicroSport Trailer #MPG464-LB…

Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector #W787264. The part #HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.

Thanks for the picture and your patience! I did some research and made some phone calls, the correct replacement for your actuator is the Replacement Inner Member for Dexter DX7.5L Actuator - Single Axle w/ Disc - 2" Ball - 7,500 lbs item…