Wiring Wood Chipper 7-Way Connector To Match 7-Way Connector On 2003 Dodge Dakota
Question:
I have a 2003 Dodge Dakota SLT with OEM towing package and I have a 2013 Vermeer BC900XL wood chipper... The two round m/f plugs appear to be the same and they fit together but not all the lights work... The Vermeer BC900XL brake and turn-signal lights work fine but NOT the night/running or back-up lights... Is there an adapter needed to mate these two OEM products and do YOU carry it??? Thanks...
asked by: SCOTT L
Helpful Expert Reply:
If the plug on the wood chipper and the plug on your Dakota do mate it is a simple matter of making sure the plugs are wired the same.
You can use a circuit tester like part # PTW2993 to test the pins on the truck first. Have someone sit in the cab of the truck and run through the functions while you test the pins on the trailer connector.
Then use a separate 12V power source and with the trailer disconnected, test each of the pins on the trailer. For typical 7-way trailer wiring you would have the following wiring configuration:
White - Ground Return
Green - Right Turn and Brake Lights
Yellow - Left Turn and Brake Lights
Red - Auxiliary Circuit
Brown - Tail Lights
Blue - Electric brake control power for brakes
Purple - Used typically for back-up lights.
If any functions are not used, you can cap them.
I have attached a helpful article on trailer wiring you can check out.
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Search Results: 16137
- Search Results: 23~429
- Shop: Dexter Electric Trailer Brakes - Parking Brake Ready - 12-1/4" - Left/Right Hand - 7.2K
- Shop: Brophy Pintle Hook for 2-1/2" Hitches - 36,000 lbs
- Shop: Dexter Lunette Ring - Adjustable Channel Mount - 3" Diameter - Black Painted - 25,000 lbs
- Search Results: brake controller
- Shop: Trailer Wiring
- Shop: Adapter 6-Pole to 7-Pole Trailer Wiring Adapter
- Search Results: akebrk~7r~sa
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Search Results: fender
- Shop: Vehicle Tow Bar Wiring
- Shop: Trailer Hitch
- Search Results: bwts20037b
- Search Results: bd195362
- Video: Finding the Right Trailer Wiring Harness
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Shop: Gooseneck Hitch
- Video: How to Choose a Trailer Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Brake Controller Installation: Starting from Scratch
- Video: Redarc Tow-Pro Trailer Brake Controller Plug-and-Play Wiring Harness Review
- Shop: Fifth Wheel Hitch
on Wiring
