Kia Trailer Wiring Harness
Make installing a trailer wiring harness on your Kia as easy as possible with a custom fit wiring harness from Draw-Tite, Curt, Pollak, Tow Ready, Bosal, or Hopkins. A custom kit will eliminate or reduce the need to cut and splice wires in your Kia while helping to protect sensitive electronics.
What our customers are saying:
Thanks for great service and quick sales/shipping. Will definately be back and recommend your site to my friends. thanks again, jim
Trailer Wiring Harness Installation - 2013 Kia Soul
Today on our 2013 Kia Soul well be installing the Upgraded ModuLite Circuit Protected Vehicle Wiring Harness with Four Pole Trailer Connector, part number 119179. To begin our installation well need to remove the vehicle taillights, well start off by opening the cargo door where well undo the three screws here on the driver side. We can then pull on the taillight assembly straight back. Now, that we have our taillight out well go ahead and disconnect them from the vehicle wiring harness. Well push on the tab, remove the connector. With the driver side assembly out, well go ahead and repeat the same procedure removing the passenger side taillight.
Trailer Wiring Harness Installation - 2010 Kia Soul
Today we are going to install part number 118431 from Tow Ready, and we are going to install this T-1 connector on a 2010 Kia Soul. First thing is, our connection points will be right behind the tail lights here. What we will do is take off each tail light, find our connection point behind that, run the wires down and then come out by the hitch. And then for the ones going to the other tail light, we will just keep going back up and to the other tail light to the passengers side.