Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.
Guide-on posts keep your trailer in view when reversing down a boat ramp. Posts also provide markers on your trailer so you keep your boat centered when loading or unloading it. Install guide-on posts above or below the I-beams on your trailer frame.
Keep your boat centered during the loading process, despite wind and waves, with these roller-style guide-ons. Corrosion-resistant posts support 9" rubber rollers with end caps. They fit trailer frames up to 3" wide x 4-1/4" tall.
Bunk-board kit lets you build your own guide-ons to ease loading of your boat onto your trailer. Kit includes 90-degree-angled tubes, brackets, hardware, and enough marine-grade carpet for (2) 69" long 2x4 boards (not included).
Keep your small boat centered during the loading process, despite wind and waves, with these bunk-board-style guide-ons. Corrosion-resistant guides are covered with marine-grade carpet and fit trailer frames up to 3" wide x 4-1/4" tall.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 7' long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.
Yes, if you install the #MAL33TR on your Malone Microsport you'd still have the same amount of bar space to carry the same amount of kayaks as you did before. This keeps the bars still above the fenders of the trailer so you don't…
The Malone MicroSport Trailer #MPG460G uses crossbars like what you would find on the roof of a vehicle instead of bunk boards. This is sold on our site as the Malone Crossbar Conversion Kit #MPG475 and it comes with the mounting hardware. If you…
The best way to determine the height needed is to measure from the top of your trailer frame to the top of the sides of your boat. If the 40" Tall Guide-Ons #CE27626 sit right at or slightly above the sides of your boat then the shorter will…
Yes, the CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60" Long - 1 Pair #CE27600 can work on the inside of a pontoon boat. Based on the photo you may prefer the CE Smith 90-Degree Bunk Board Guide-On Kit #CE27600K90 which will includes…
The ribs of your John boat are actually very strong and the design of them gives the metal quite a bit more strength than if the bottom of the boat was totally smooth. Due to that the CE Smith Carpeted Johnboat bunk part #CE27850 that you referenced…
The Tongue Mounted Crossbar for Malone MicroSport Trailers part #MPG4002 isn't compatible with trailers using the Retractable Tongue Kit for Malone MicroSport Trailers part #MPG494. The reason for this as you mentioned is the crossbar height due…
While you never want to exceed an item's working load limit (WLL) in your actual application, the nature of your trailer matters too when selecting a winch strap. If you have roller bunks rather than carpeted bunks this reduces friction and means…
It sounds like you'll need to do some fab work in order to get the guide-ons to work. I believe your best bet would be to eliminate the u-bolts and have the brackets welded to the top or the underside of the frame member. If the fender step…
The bolt hole spacing for the CE Smith Front/Rear Hanger Bracket for Double-Eye Springs #CE14026G is 4-3/8" x 1-5/8". I've attached a dimensional photo for you to check out as well as a review video to reference.
The issue with the leaf springs being too bouncy could be caused by a few different things. The first is that they are not properly rated for the weight of the trailer, they are worn down too far, or the trailer is being overloaded. Furthermore, a…
You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…
Lighted guide-on posts make it easy to load your boat onto your trailer and safer to transport it at night. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 4-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.
These guide-on posts make it easy to load your pontoon boat onto your trailer. They attach to the rear of your trailer and extend out of the water, providing a visual target to center the boat's pontoons around. Mounting hardware included.
Bias tire has a ply rating of 6 and a 1,870-lb maximum load at 50 psi. The 14" diameter x 6" wide steel trailer wheel features a 5 on 4-1/2 bolt pattern and a corrosion-resistant galvanized finish.
Lighted guide-on posts make it easy to load your boat onto your trailer and safer to transport it at night. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.
Radial special trailer tire provides excellent traction for a safe, smooth ride in both wet and dry conditions. Constructed of double steel belts and full nylon plies. Fits 14" wheels and has a maximum load capacity of 1,870 lbs at 50 psi.
Custom, under-bed rail kit provides uninhibited use of your truck bed once hitch is removed, and it features Reese's easy and secure Power Puck mounting system. Works with Elite Series fifth-wheel hitches.
Bias tire has a ply rating of 6 and a 1,870-lb maximum load at 50 psi. The 14" diameter x 6" wide steel trailer wheel features a 5 on 4-1/2 bolt pattern and a corrosion-resistant powder coat finish.
Custom, under-bed rail kit provides uninhibited use of your truck bed once hitch is removed and features Reese's easy and secure Power Puck mounting system. Works with Elite Series and Signature Series fifth-wheel and gooseneck hitches.
Radial special trailer tire with automotive-grade tread has a ply rating of 8 and a 2,200-lb max load at 65 psi. Constructed of double steel belts and double polyester cords with a nylon overlay. Great for highway use. Fits 14" wheels.
9" Wide x 30" long x 13-1/4" tall. This sturdy trailer fender has a slanted back, offering extra cargo clearance and making it great for your boat trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.
Replaces 1 upright tube for CE Smith bunk-style guide-ons for boat trailers (CE27620, CE27670, and CE27740). Lance prevents rotation of PVC posts. Mounting hardware (CE11452-A) sold separately.
Custom, under-bed rail kit provides uninhibited use of your truck bed once hitch is removed, and it features Reese's easy and secure Power Puck mounting system. Works with Elite Series fifth-wheel and gooseneck hitches.
Guide-on posts make it easy to load your boat onto your trailer and back your trailer down the ramp. They attach to the rear of your trailer and extend out of the water, providing visual targets to center the boat between during loading.
Replace worn carpet on your boat trailer's bunks and help protect your boat's finish with this durable, weather-resistant carpet. Marine-grade polyester won't trap in moisture. Resists mold and mildew.
Replaces 1 upright tube for CE Smith bunk-style guide-ons for boat trailers (CE27640 and CE27760). Lance prevents rotation of PVC posts. Mounting hardware (CE11452-A) sold separately.
Filter Results
