Search: 7 Inch Round Tail Lights   >   !Hitch Accessories   >  

This load resistor prevents the LED turn signal light on your truck or trailer from hyperflashing. Resistor has right-angle male PL-3 plug on one end and female PL-3 plug on the other end. warranty Note: One resistor is required per LED light. Hyperflashing (or rapid blinking) of turn signals can occur when you switch from incandescent lights to LED lights. LEDs draw less power than

• Trailer Lights
• Load-Resistor Kit
• Optronics
• Aluminum

7" Diameter round. 3-Function, waterproof transit light acts as brake, tail, and turn signal light. Durable polycarbonate housing and lens. Surface mount with mounting gasket (sold separately ...
Features: Round LED trailer transit light serves 3 functions Stop light Tail light Turn signal light Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements

• Tail Lights
• Stop/Turn/Tail
• Submersible Lights
• 7 Inch Diameter
• Optronics
• Round
• Red
• Surface Mount

5-5/8" Round. Waterproof LED trailer light acts as a stop, tail, and turn signal. Built-in reflex reflector. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware ...
Features: Round trailer tail light serves 3 functions when properly mounted Stop light Tail light Turn signal light Built-in reflex reflector removes the need for a separate reflector Sonically

• Tail Lights
• Stop/Turn/Tail
• Submersible Lights
• 5-5/8 Inch Diameter
• Optronics
• Round
• Red
• Surface Mount

3-7/8" Diameter round. Incandescent trailer light serves 3 functions: stop, turn, and tail light. Screw-on lens. Durable steel housing. Stud mount to trailer with included studs. 2-Wire design ...
Features: Incandescent trailer light serves 3 functions Stop, turn, and tail Incandescent bulb is easy to replace Shock-proof socket protects bulb against damage Durable steel housing with screw-on

• Tail Lights
• Stop/Turn/Tail
• Non-Submersible Lights
• 3-7/8 Inch Diameter
• Optronics
• Round
• Red
• Surface Mount

7-1/8" Diameter incandescent transit light acts as a brake and tail light. Durable steel housing. Screw-on lens. Surface mount - hardware not included. 2-Wire design.Features: Round trailer transit light serves 2 function Stop and tail Incandescent bulb is easy to replace Durable steel housing Red screw-on lens Compatible with 12V DC systems Surface mount -

• Tail Lights
• Stop
• Turn
• Non-Submersible Lights
• 7-1/8 Inch Diameter
• Optronics
• Round
• Red
• Surface Mount

7" Diameter. Waterproof, LED transit tail light with 32 diodes provides stop, turn, and tail functions. Built-in reflex reflector. GloLight lens creates a solid panel of light. Surface mount ...
Features: Round transit tail light provides stop, turn, and tail functions Built-in reflex reflector removes the need for a separate reflector GloLight lens creates a solid light pattern

• Tail Lights
• Stop/Turn/Tail
• Submersible Lights
• 7 Inch Diameter
• Optronics
• Round
• Red
• Surface Mount

5-3/8" Round. Waterproof, LED trailer light with 20 diodes provides stop, turn, tail, and rear reflex functions. Durable polycarbonate base and acrylic lens. Mounts on surface of trailer - ...
Features: Round LED trailer light provides stop, turn, and tail light function Built-in rear reflex reflector eliminates the need for a separate reflector Sealed, waterproof housing and lens unit

• Tail Lights
• Rear Reflector
• Stop/Turn/Tail
• Non-Submersible Lights
• 5-3/8 Inch Diameter
• Command Electronics
• Round
• Red
• Surface Mount

3-7/8" Diameter round. Incandescent trailer light serves 4 functions: stop, turn, tail, and license plate light. Screw-on lens. Durable steel housing. Stud mount to trailer with included studs ...
Features: Incandescent trailer light serves 4 functions Stop, turn, and tail Built-in license plate light illuminates trailer license plate Incandescent bulb is easy to replace Shock-proof socket

• Tail Lights
• License Plate
• Stop/Turn/Tail
• Non-Submersible Lights
• 3-7/8 Inch Diameter
• Optronics
• Round
• Red
• Surface Mount

4" Round. Waterproof, trailer tail light with 4 diodes provides stop, turn, and tail functions. Built-in reflex reflector on mounting flange. Durable polycarbonate housing. Surface mounts ...
Features: Round tail light provides stop, turn, and tail function Built-in reflector removes the need for a separate reflector Sonically sealed, waterproof housing and lens unit is submersible LEDs

• Tail Lights
• Submersible Lights
• 4 Inch Diameter
• Optronics
• Round
• Red
• Surface Mount

7" Diameter x 1-7/16" deep. Waterproof transit light serves 3 functions: stop, turn, tail. Weathertight gasket included. Surface mount on 6-1/4" centers. 3-Wire design. 12-24 Volts. 31 ...
Features: Red trailer light serves 3 functions Stop, tail, and turn signal light Long-lasting LEDs (light emitting diode) are great replacements for incandescent lights Multi-diode design optimizes

• Tail Lights
• Stop/Turn/Tail
• Submersible Lights
• 7 Inch Diameter
• Optronics
• Round
• Red
• Surface Mount

Heavy-duty, 1-piece forged ball mount measures 8-1/2" from pin hole to ball hole. Use this Class V accessory in either the drop or rise position to fit your application.

• Fixed Ball Mount
• No Ball
• Drop - 2 Inch
• Rise - 1 Inch
• Class V
• 20000 lbs GTW
• CURT
• 1-1/4 Inch Ball Hole Diameter
• Steel Shank - Matte Black

7" Diameter round. 4-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Built-in reflex reflector. Surface mount with included rubber ...
Features: Round trailer tail light serves 4 functions Turn signal light Tail light Brake light Built-in reflex reflector GloLight lens creates a solid light pattern with a smooth appearance Outer

• Tail Lights
• Rear Reflector
• Stop/Turn/Tail
• Submersible Lights
• 7 Inch Diameter
• Optronics
• Round
• Red
• Surface Mount

Heavy-duty, 1-piece forged ball mount measures 8-1/2" from pin hole to ball hole. Use this Class V accessory in either the drop or rise position to fit your application.

• Fixed Ball Mount
• No Ball
• Drop - 2 Inch
• Rise - 1 Inch
• Class V
• 17000 lbs GTW
• CURT
• 1-1/4 Inch Ball Hole Diameter
• Steel Shank - Matte Black

Built tough for off-road use! Designed in Australia to stand up to the rigors of the Outback. Dual rubber tires can easily track through mud and gravel. Powder coat finish offers great rust protection. 10" Screw travel and 8" drop leg. moving trailer: 23-1/2" Total lift: 17-11/16" Screw travel : 10" Drop leg travel : 7-11/16" Wheel dimensions: 8" diameter x 2" wide 1-Year limited warranty Note: Do not use

• Utility Trailer
• Boat Trailer
• Enclosed Trailer
• Car Hauler
• Leveling Jacks
• Tongue Jacks
• Swivel Jack
• Sidewind Jack
• Bolt-On
• Ark
• Steel
• With Wheel
• 1001 - 2000 lbs

7-1/8" Diam x 2-3/16" D; Weather-tight seal w/gasket; replaceable lens and bulb; surface mount on 6-1/4" centers; 2-wire; 1-bulb incandescent7" Round Transit Turn Signal Light - Amber This is a round transit light used as a turn signal light. This amber light is 7-1/8" in diameter by 2-3/16" deep. The light includes

• Tail Lights
• Turn
• Non-Submersible Lights
• 7-1/8 Inch Diameter
• Optronics
• Round
• Amber
• Surface Mount

7" Diameter round. Waterproof, LED trailer light is certified for backup light function in a 2-lamp system when a pair of lights is installed. Durable polycarbonate housing and lens. Surface ...
Features: Round backup light for transit vehicles Certified for backup light function when installed as a pair in a 2-lamp system (second light sold separately) High diode count creates a strong

• Tail Lights
• Backup
• Submersible Lights
• 7 Inch Diameter
• Optronics
• Round
• White
• Surface Mount

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. and installation instructions included Lifetime technical support from the experts at etrailer.com Gloss black powder coat finish over protective base coat offers superior rust resistance Stylish, round-tube design

• Custom Fit Hitch
• Class III
• 8000 lbs WD GTW
• 800 lbs WD TW
• CURT
• 600 lbs TW
• Visible Cross Tube
• 6000 lbs GTW

7" Diam x 1-7/16" D. Waterproof transit light acts as a turn signal light and parking light. Weather-tight seal with a gasket. Replaceable lens. Surface mount on 6-1/4" centers. 3-Wire ...
at 12.8 volts This round LED transit light is used as a turn signal and parking light. This amber light is 7" in diameter by 1-7/16" deep. The light includes a gasket for a weathertight seal

• Tail Lights
• Parking
• Turn
• Non-Submersible Lights
• 7 Inch Diameter
• Optronics
• Round
• Amber
• Surface Mount

5-1/2" Round. Incandescent trailer light functions as a stop, tail, and turn signal. Vibar socket absorbs road shock and vibration. Durable steel housing. Flush mount with built-in flange ...
Features: Combination trailer tail light serves 3 functions when properly mounted Stop light Tail light Turn signal light Vibar socket absorbs road shock and vibration to prolong bulb life

• Tail Lights
• Rear Reflector
• Stop/Turn/Tail
• Non-Submersible Lights
• 5-1/2 Inch Diameter
• Peterson
• Round
• Red
• Recessed Mount

7" Diameter round LED trailer light functions as a back up light. Sealed polycarbonate housing and lens. 2-Wire pigtail includes power lead and ground wire. Companion to Peterson LED stop, tail ...
Features: Round backup light for trailers and utility trucks Works great for transit, bus, utility, and dome light applications Companion to Peterson LED stop, tail, turn lights (PE94AR and PE64AR -

• Tail Lights
• Backup
• Non-Submersible Lights
• 7 Inch Diameter
• Peterson
• Round
• White
• Surface Mount

7" Diameter round LED transit tail light functions as a rear turn signal light. Sealed polycarbonate housing and lens. Hard-wired with 0.180 male bullet for hot wire and ring terminal for ground ...
Features: Round LED transit light provides rear turn signal function LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power

• Tail Lights
• Turn
• Non-Submersible Lights
• 7 Inch Diameter
• Peterson
• Round
• Amber
• Surface Mount

These load resistors prevent hyperflashing on turn signals with LED light bulbs. Compact design - fits in tight spaces.

• Trailer Lights
• Load-Resistor Kit
• Diamond

3-7/16" Round. Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base with traditional incandescent style lens. Mounts on surface of trailer ...
Features: Small, round trailer light serves as either a clearance or side marker light Great for chassis applications Built-in reflex reflector removes the need for a separate reflector LEDs make

• Tail Lights
• Rear Clearance
• Side Marker
• Side Reflector
• Non-Submersible Lights
• 3-7/16 Inch Diameter
• Peterson
• Round
• Red
• Surface Mount

Plug this adapter into your existing 7-way when towing a trailer equipped with LED lights so that your vehicle's computer will recognize the trailer's signals. Designed for use on vehicles ...
Features: Plugs into an existing 7-way socket to provide a new 7-way socket that is able to recognize LED trailer lights Built-in resistors enable LED signals from your trailer to be read by your

• Trailer Hitch Wiring
• 7 Round - Blade
• CURT
• Custom Fit