Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
If you’re done replacing faded bulbs or weak lights, this 7" round LED tail light is a real step up. It uses 31 red LEDs to deliver strong, even illumination for stop, turn, and tail signals. The multi-diode design pushes out more light with less power draw—just 0.180 amps on stop and 0.086 amps on tail at 24 volts. It works on both 12-volt and 24-volt systems, so it’s ready for whatever electrical setup you run. No bulbs to swap, no filaments to break, just bright, consistent light every time.
Water and wiring don’t mix, but this light is built to handle it. The housing and red lens are sealed tight, making the entire assembly waterproof and submersible. A weathertight mounting gasket is included to keep moisture out where the light meets the surface. Even in rain, washdowns, or full submersion, the LEDs stay protected and clear.
You don’t need special brackets or odd tools to mount this one. The round body measures 7" in diameter and 1-7/16" deep, designed for easy surface mounting on 6-1/4" centers. The 3-wire design keeps things straightforward—lead wires for power and a ground wire—and makes it compatible with standard wiring setups. Installation is simple, clean, and dependable.
This light is made to last. The solid-state LEDs don’t suffer from vibration or shock like filament bulbs, so they keep shining strong through years of use. It’s DOT compliant and meets FMVSS 108 requirements in any 360-degree position. The LEDs come backed by a lifetime warranty, giving you long-term confidence every time you’re on the road.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
ARRIVED TODAY GOOD SHAPE THANK YOU
Great.
Easy to install look great sealed very well
Has not faded and is still as vibrant with color
Sat in warehouse for five day with no movement after label was created waiting for pickup. Called to inform them it hadn’t moved and guy on phone blamed usps did not scan packages on pick up.
Having not installed these lights I can only comment on the fact that they look well constructed and are almost identical in size to the lights that came off of my 1962 Airstream Ambassador. They do not mount in the same manner but will cover the holes easily making these a good choice for replacing my old broken fixtures.
Perfect replacement for my original.
Just what I was looking for a 7 inch LED lamps for my motorhome
Great buying experience, highly recommend etrailer. Excellent product.
I actually thought they were going to be two lights in the box. I needed to love them. I would like to order another one, but I’d like to make sure it gets here quickly. I don’t think it was clear in the description that there was only one white. It didn’t say to either, so my mistake in assuming
This light works great We have replaced about 30 so far with this LED unit. Much brighter, sealed. A quality item. It is being used off road in a construction environment.
Bought these for a vintage Airstream. I was initially afraid they may not be bright enough on 12 volts, but after installung them if they were any brighter they would be distracting. I'm very pleased with them.
Hi e trailer .,, thanks- Airstream parts are hard to find. good job. Mike
Good quality, bright led light. Easy to install
Absolutely great very bright and easy to mount. You can truly tell a difference from tail light to brake light when you push the brakes.
Great service. Had an issue with the marker lights and replacements were sent out without question.
Excellent...
My old Airstream had 6" dia. lights and thes 7" dia ones fit perfectly.
Kenny U.
6/7/2016
All still fantastic
FYI - The item I received had 12v/24v on a sticker (mfg) on the back of the light so it is a dual voltage lite.
Banshee
8/11/2016
Perfect Quality - Cant beat this companies products as when I look for lights I make sure it is THEIR products before I buy!
I installed these on an 1978 MCI bus. Only used the brake light part of the light, much brighter brake lights than the original bulb type. Every thing lined up no problems.
I was looking for a tail light for a trailer that would operate on both 12 and 24 volts. That way the trailer could be towed by a truck with either a 12 or 24 volt electrical system. There are ways to do it but this would be dead simple. The light is very bright. It appears to be well made.
These are good looking likes, I used them on my Scamp camper to replace 2 round fixtures, they are at least as bright as the factory fixtures if not brighter. My only note would be that they don't come with screws.
Jacob
9/27/2016
They are still working great after a year and 4000 miles
Yes I did buy a set of 24 volts trailer lights which I did install on my Challenger Trailer. This is a small trailer which I use when I go shopping which attaches to my Pride Handicap four wheel scooter.
After I installed them, I made a test and found out that I did have current up to the lights. But the lights did not work. I ended up ordering a set of tail lights from Pride.ca. They came installed in a rear panel for a scooter. Yes they work.
I decided to keep the lights I ordered from you. This was a learning experience. Or trial and error.
I thank you for your concern and yes, I would recommend your company for your automotive lights.
Have a nice day.
Great light, very bright, and comes with a gasket to keep water out of my camper I am building!
Light worked out perfect for what i needed. I was looking for a 7" light for a vintage camper i was fixing up and this light was perfect. Super bright and the quality is great. Should last many years to come.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Patrick J.
4/6/2019
Still working great, very bright and very durable light.