To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Ideal for heavy-duty towing, this Chevrolet Silverado trailer hitch has a cast steel center that is designed to handle hefty tongue weights. Tested Tough guarantee ensures that this durable, corrosion-resistant hitch exceeds industry standards.
Features:
Specs:
Specifically designed for a serious towing machine, this rugged trailer hitch receiver features the strong, durable construction that your heavy-duty applications require. The secure side-bracket design and all-frame attachment system ensure maximum stability. The cast center section lets you pile on the tongue weight without any worries. And the reinforced pin hole and large safety-chain loops better accommodate your heavy-duty towing needs.
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real-life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
No drilling required for installation , Hitch will fit with full size spare tire stowed under vehicle , If equipped with a factory hitch, the factory hitch will need to be removed to install this hitch
California residents: click here
Complete Towing Package for 2001 Chevrolet Silverado
2001 Chevrolet Silverado Owners Who Purchased This Trailer Hitch Also Bought...
Popular Silverado Trailer Hitch Accessories
Average Customer Rating: 4.8 out of 5 stars (295 Customer Reviews)
Ideal for heavy-duty towing, this vehicle trailer hitch has a cast steel center that is designed to handle hefty tongue weights. Tested Tough guarantee ensures that this durable, corrosion-resistant hitch exceeds industry standards.Heavy Metal! This hitch makes the stock hitch look like a toy. I wish I had replaced the stock hitch a long time ago. Because it is big and heavy, it took most of an afternoon to install. Pay attention to the reinforcement blocks--the narrow edge goes toward the flange. They will not lay flat otherwise. I reused some of the stock hardware which was superior to what is supplied. You will need a half inch torque wrench to torque the bolts--which need to be more than 10 ugga duggas tight. I also used red loctite. The hitch pin for the class 3 hitch was too short. I had to replace it with a class 5 pin. The stock hitch plug also needed replacing since the bracket is part of the stock hitch. I used a Hopkins 40955. While I was at it I added a Hopkins backup/hitching camera that I purchased from E trailer a while ago. I am happy that I did this job to make towing safer.
Shipped fast. Packaged well. not happy about bare metal right out of the box. Very heavy duty. Haven't installed yet. I shouldn't have to put primer & paint on before installing this. Learned my lesson.Will buy local next time. Will be reviewing this on my YouTube channel.
It was a little confusing picking out the right hitch for this truck. After I saw the main difference was which bumper came from factory, that narrowed it down. The quality of the hitch and related parts was excellent! It could have been useful to have drawings of the hitches with measurements. Thank you for the help on the phone. I mounted it on Sat. 1/6/24. Good fit and nice hardware kit.
its nice to no i dont have to compete with internet prices anymore, thank you for offering me a chance to buy at a discounted price
Nice quality hitch. Thick powder coat, beefy frame members. Took 15 minutes to install with an extra set of hands, (highly recommended as it is heavy). Instructions were a bit hard to make out as they were very faded in some areas. I found them online though and they are very straightforward and easy to follow. Highly recommend this hitch for your '01-'10 2500/3500 GM truck!
I was considering this unit or the comparable Curt Class V, and ultimately chose this which allows my oversized 285/75/16 spare to fit in the stock location. In addition, the hardware is included for use with- or without back bumper (mine is without). Easy install, no drilling required.
As far as etrailer - the large box arrived quickly and I appreciated the updates and post install follow up.
Spot that was damaged and had missing, powdercoat rusted, even with the suggested expensive paint applied three coats. Local purchases only going forward
Jeremy
12/8/2023
Rusty
Jenny N.
12/8/2023
Helpful Links
Love the hitch. Very easy to switch from the old rusty to this new stud. Very strongly built.....love the fit. Total faith in this product. Thanks e-Trailer. Hard to believe 6 bolts can do it. I cut lots of wood, heavy hauls w/ my Silverado HD Duramax....I have a hitch that is as strong as my truck now.
Ted W.
9/21/2017
Its great, I pull heavy trailers all the time. Love it. Thx.
Product is very well built, impressed with the quality of the hitch, much beefer than the stock hitch. Shipping container was pretty much trashed but everything was there. The diagram in the instructions were kind of faded and difficult to read, took us (two) 3 hrs to install with air tools. So far very satisfied, haven’t tow with it yet. Taking a trip in October 2018. We will see!
Robert
9/16/2019
I was impressed with the quality of the product, its very heavy duty. Very satisfied with the product. Took us about 3 hours to install with power tools, instructions a little difficult to read, faded.
Hitch arrived in excellent condition due to good packaging. No scratches in the paintwork, which by the way appeared well prepared and painted.
Installation went relatively smoothly after the instructions were thoroughly understood. The reason I say relatively is that a Porta Power (hydraulic ram) was needed to spread the rear of the frame less than 1/4" to line up bolt holes. The vehicle is 17 years old and who knows what may have happened to the rear end of the frame by the previous owner(s).
I also ordered CurtT-Connector #55774 wiring harness which unfortunately arrived without the mounting hardware. The bracket and harness did arrive however the mounting screws and nuts did not. Luckily my son and I installed it at his garage so we had the needed hardware on hand.
Overall installation took us about 2 hours including spreading the frame and mounting the wiring harness.
Fast Shipping! Great Communication! Great Price on brand name receiver!
hitch was really easy to install, the only problem i has was with the Review the Pro Series Lock-Tite Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - PS63100,the shaft wasn't long enough
This is a great replacement for my factory hitch, which was rusted away. This is way more rugged which suits my occasional heavy towing needs. I really like the height of the receiver to the bumper. Install was very easy, took longer to understand the instructions than the actual placement.
Well made went on with ease 25 minutes and done towing a breeze love it
This hitch is absolutely awesome. Probably the most heavy duty hitch I have ever seen and the installation was super easy (about 45 minutes). The position of the hitch is great also, as it tucks under the bumper and is almost hidden, for a very clean look.
Hitch arrived before expected. Box was a bit beat up but hitch was in fine shape and well protected. Came with all the hardware needed to attach. Took about an hour to install. Bolted right on the frame of my 2002 2500HD 8’ bed. This is a way better hitch than OEM. I’m sure it will be the last hitch I buy for this truck.
Ordering was very easy, came in a couple days. Mounted the hitch in less than an hour. Had to make a few changes due to the lack of a bumper on my truck (just installed a flatbed) .Looks to be a very well built hitch .
products that i ordered were shipped fast and arrived in good shape. I just put trailer hitch on with no problems. This looks and feels like a very strong, quality built product. I work in the the trucking industry as a mechanic and see thing that are built to last a long time. I see the same quality in this product as well
the draw tite hitch is built just like the original factory hitch, and rated for more than the truck can handle. The packing was shoddy at best and mine arrived without most of the hardware. Seems they tape the hardware to the hitch and put it in a simple cardboard box, My ups man has the grace of a hand grenade so check the box for damage when it arrives. I figured they couldn't hurt a 90lb piece of welded steel, but they are more inventive than that. It took four phone calls and several emails over the course of a month to get the parts I needed to mount the hitch. Once I made enough noise they shipped me new hardware and it took less than an hour to mount. The hitch is heavy duty and well made and bolts on with no drilling. It would be easier to install if you have some help lifting it into position, but with some creative contortions one person can do it. If your looking for a hitch that fits right under the bumper this is a good choice. Getting the spare out of the way was the hard part , so I watched a video on the internet to figure that part out. Now I have a hitch for my new camper and the peace of mind knowing that thing is bolted on correctly and is part of the frame.
Mike M.
10/6/2015
The Draw Tite hitch is well built and attaches easily,After a year in NY winter and summer it still looks like new and I,ve had no problems with the hitch. It is actually holding up better than some factory hitches I have seen as the powder coat is still shiny black and no rust is forming. I did recheck the bolts after a trip to Nashville and 16 hours of towing a 6000lb camper and had no issues. E-trailer made the experience of buying and installing easy and stood behind the product by helping with the missing parts,which was a life saver or more correctly a vacation saver. The parts arrived in the nick of time but they were as helpful as they could be. Overall I would use this same hitch if I had to replace the one I have..
Mike M.
10/19/2015
After getting all the parts that were lost in transit it went on easily and works great. I will recommend E-Trailer to my friends.
Awesome product super heavy duty and an exact fit for my 2004 Chevrolet Silverado 2500hd. Thank you again etrailer
Ordered Sunday night, received Thursday. Packaging was in rough shape from .. dropping it in driveway. Minor scratches, easily painted over. All hardware was secured in plastic wrap. Easy to install, other than lifting into place without help. Ended up using jack stands to support while I lined up holes. This hitch seems to weigh about twice that of OEM installed hitch. ( brand unknown ). Hitch is approx. inch and a half higher than stock. Have not towed yet, need to recheck height for WD hitch setup. Found install video more helpful than directions from manufacturer.
Jim V.
7/4/2017
Still happy with hitch. Heavy duty construction. Should outlast tow vehicle.
Quick shipping and bolted right up into my 2004 GMC Sierra 2500HD. Very happy to be towing again. Heavy duty and solid hitch.
Install went fairly easily and it looks great. Tough and beefy like a real hitch should. I especially like the square tubing over round. No play or give while towing heavy. Definitely suited my needs for a heavy duty hitch.
Nice hitch. It fit perfect
Only thing I don’t care for is chain hook loops are to big and cant get chains with hasp to latch closed.
After the factory installed hitch on my '01 GMC 2500HD showed signs of severe fatigue (broken welds and fatigue cracks) , the Draw Tite replacement was much more capable for the task of pulling our 35' Newmar Country Star travel trailer. Glad I went back to etrailer again for my specific needs.
Bob P.
6/6/2021
Great improvement over OEM hitch.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jeffrey S.
7/2/2022
Still very satisfied with this hitch after a year. My only complaint about it is that the safety chain part of it is a bit too thick as I had to slightly bend open the chain hooks on two of my trailers so that they could be attached to the hitch.