2011 Chevrolet Tahoe Windshield Covers

Hi Wilfredo, absolutely! If you want the easiest and most seamless setup, this is the combination I would go with for your 2026 Jayco Greyhawk and 2026 Ford Maverick Hybrid. I would start with the Roadmaster Direct Connect Base Plate Kit, part…

Hey Terry, thanks for all of the information! If your aftermarket bumper doesn't have special loops designed for safety chains, you should attach your safety cables directly to the Jeep’s frame rails. You will definitely want to use safety cables…

Hey Roland, sorry to hear about your SnapPads almost getting stolen. I wish there was a better way to lock them on so that people wouldn't be tempted to steal them. I will say we haven't heard a lot about these getting stolen so I don't…

It most cases, it's recommended to go ahead and install a trickle charger on the vehicle's battery while using a supplemental braking system like the Demco SBS Stay-IN-Play DUO Supplemental Braking System part #SM99251. In most cases, there…

Hi Michael, Sorry to hear that happened! Yes, you can purchase a single replacement SnapPad, but I would just need to know which size and shape you need. For example, the SnapPad Jack Pad for Camper Jacks with 5-1/2 inch round feet, part #SN97FR, is…

Hey Laura! Yes, the Van Windows Direct #VW83FR and #VW45FR come with the parts needed for installation. However, each one does list some additional materials and tools to complete the installation. I went ahead and attached pictures of these below. I…

Hey Brad! We have a couple of great options for locking the Gen-Y Executive gooseneck pin box on your Brinkley RV! My first recommendation is the InfiniteRule SnapLatch Coupler Lock #IR48FR. This lock is specifically designed for Gen-Y's…

Hey Tim, thanks for reaching out, and good question. That Demco Vacuum Tee Fitting #DM6257 is actually made so you don’t have to cut into anything, but it only works if your Jeep has the right style connection at the brake booster. On the newer…

Hello Theresa, Yes, the TorkLift GlowStep Revolution #TLA8002 will work on your 2022 Forest River Aurora 18BHS based on the measurements you provided. Your 24 inch ground clearance is right within the operating range for the 2-step #TLA8002, and the…

Hey Guy, welcome back! For your Equalizer Leveling System, you'll need the SnapPad EQ Compact Jack Pads item #SP24FR4. These are designed specifically for the feet on your landing gear. They're going to attach directly to them and remain on…

Hey Jim! You can use that hole on your #GY72SB (GH-8056AL) to secure it using the InfiniteRule Lock for Gen-Y Hitch SnapLatches #IR48FR. The Guardian Lock #AL35QF you were looking at will also work. This is probably the most undefeatable solution out…

If the Truxedo tonneau cover happened to have the Truxedo TS rail kit (we can't get it anymore) then use the Yakima Overhaul HD Ladder Rack part #Y01151-5755 would fit with it. If you do not have those rails though it would not work.