2007 Can-Am Outlander Max 650 ATV Winch Mount

Good question. The Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 2,000 lbs part #DL14725 is rated to hold 58 feet of 9/32" cable. That cable has a diameter is 3 times that of what you intend to use on it with the 3/16.…

I reached out to my contact at Dutton-Lainson and she said that there is not a ratcheting handle available that's compatible with the DL1402A model Hand Winch #DL15303. For one that can be used with a ratcheting handle a higher-rated winch is…

Great question! I believe that you're wanting to extend that handle out horizontally so that you aren't having to 1 - get on your hands and knees while operating the winch, and 2 - having to keep removing and installing the handle because it…

The socket/drill adapter part #DL6456 that you referenced only fits worm gear style winches like the #DL11011 from Dutton Lainson and would not fit the winch part #DL14725.

A tree or stump is not a recommended place to mount a winch. Normally in these situations, people mount the winch on a steel post that is held in the ground with concrete in order to support the weight. You would need to make sure the winch pays out…

Bright Way actually has a replacement plunger for their Breakaway kit par #3802311 that you have with the part #3802350 which does happen to look very similar too the Fastway replacement plunger part #FA80-01-2206.

I went out into our warehouse to grab a Dutton Lainson Winch part #DL14627 to measure the bolt hole dimensions for you. I attached a picture that has all of them listed.

I believe you are asking how to remove the shower door part #PF267001 from the shower box without damaging the frame of the shower box. There should be a pin with a spring on either side of the door. If you can compress those pins in the door, you…

I have just what you will need. I have linked an FAQ article that explains the various ways to wire a winch. You will need the second half of the page titled Option 2: Wiring the Winch to a Separate, Trailer-Mounted Battery. I have also included a…

Yes, The Bulldog Winch Custom Winch Mount #BDW15148 will fit your 2002 Artic Cat 500i Automatic 4x4 with liquid cooling. It was designed for models with liquid cooling so it'll work fine with the radiator.

Winch mounting bracket #BDW15148 is designed to fit a 2002 Arctic Cat 500 Manual 4x4 or Automatic 4x4 and Automatic TBX 4x4. We only carry this one bracket for 2002 Arctic Cat 500 models.

If you're going to use a winch to raise and lower your popup you will want a winch that power loads both in and out. With a winch that will only power load in you will only be able to raise the popup and not lower with the winch. We have the…