2021 Toyota Corolla Trim Kits

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. The Curt item #C26VV is a class III hitch with a 2" receiver.…

The manual switch for the Pace Edwards Bedlocker Retractable Hard Tonneau Cover #PE44CV can be found as part #311-BL-1120 on our site. This plugs into the harness at the canister and then you route and install the switch wherever it works best for…

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity,…

To activate the brakes on a trailer with your 2024 Toyota Grand Highlander you'll need a 7-way connector and brake controller. To switch over from your 4-pin connector you can install the #ETBC7L. This will plug into your 4-pole…

The trailer hitch receiver that fits your 2024 Toyota RAV4 and has the best clearances - both bumper clearance and ground clearance - is the EcoHitch, with the correct fit for the '24 RAV4 being the following: - EcoHitch Hidden Trailer…

We carry many fenders, though we do not have a list of parts specific to any type of trailer. I have added a link for you to each of our available fenders to take a look at. You will need to know the size of your tires as well as the length of…

The 2 inch trailer hitch I recommend for your 2024 Mazda CX-5 is the etrailer Trailer Hitch #e98902. This is the best due to its matte black powder coat which resists the inevitable scuffs better than other hitches.

It looks like you are referring to the Pace Edwards Switchblade Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black #311-SWFA19A45 and the Pace Edwards JackRabbit Retractable Hard Tonneau Cover - Aluminum and Vinyl - Matte Black…

For your 2023 Subaru Outback, I recommend the Curt Trailer Hitch item #C69VV. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. I really like this hitch because it is…

In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please…

I found the online version of the install instructions for the Exact Center stabilizers like the #RM47MR. What's fun is that just when you think you have found the correct step to address your problem it tells you to continue to the…