Hey David, thanks for reaching out! The handrail for the Lippert Solid Step unfortunately isn't compatible with the Solid Step XF, and they haven't made any handrails for the F model either. What I recommend doing is installing the MORryde…
It really just depends on what you are looking to get out of the bushings. Bronze bushings, like part #K71-291-00, will last longer but are more noisy and it is recommended to use wet bolts like part #126B2 to keep them lubricated. Nylon bushings,…
Hello Sal, Since you have the 1st Generation silver with 6 holes, you are going to want the Replacement Hydraulic Jack Assembly for Lippert Level Up 5th Wheel RV Leveling System - 14K - Gen 1 #LC25AF. You are probably thinking, "I said 6 holes,…
Hey Damon, we do not have rebuild kits available for the Replacement Level Up jack leg 8005353 which is our part number #LC83ED. Only solution is a new leg which I get is pretty expensive.
So I checked with Lippert and they told me that the Slim Shade and the Thin Shade like the part #LC786037 you referenced are the same thing, and since you have the Slim Shade this would work perfectly with it.
As you may have already found, 5200 lb, 6000 lb and 7000 lb axles can all use the same components including inner/outer bearings, hubs and brakes. Here are some other things they share in common: Dexter 5200 lb Regular Duty Axle - 0.180 inch tube…
Hi Douglas; thank you for providing that information down below. What you have now is the 25712510. The correct replacement leg is the Replacement Hydraulic Jack Assembly for Lippert 5th Wheel RV Leveling System - 14,000 lbs - Gen 1 #LC25AF. The…
The best replacement we offer for an Atwood RV Water Heater GC6AA-8P is the Atwood RV Water Heater GC6AA-8 part #AT96117. The only difference is that the model you have now as an automatic pilot light feature in case the pilot goes out which is not…
Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
I sure can! To replace the bearings in your 2023 Grand Design with Dexter 7,000 lbs axles you will need the following parts: Inner Bearing - Replacement Trailer Hub Bearing item #25580 Outer Bearing - Replacement Trailer Hub Bearing item #14125A…
Yes, the correct replacement lid cover for your MaxxFan Plus Roof Vent w/ 12V Fan part #MA00-04500K (4951KS) is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K.
I attached a picture of the dimensions or the Lippert Door Window Frame part #LC363370 that you referenced. The size you have is the standard that this is designed to fit.
