When we research towing capacities we base it off of what the owner's manual says but for some unknown reason there are no online manuals available for a 2018 Hyundai Tucson. I did take a look at the Hyundai website and as you said it listed the…
I'm sorry to hear about your trouble and I would be happy to help you get your boat where it needs to go. For a hitch that fits your 2017 Tucson and won't need to be returned I recommend the etrailer Trailer Hitch Receiver #e54AR you were…
There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…
In order to narrow this down I would start by checking the vehicle side of the connector. Check and see if there is power using a circuit tester like the #PTW2993. If you find that there is power then you can rule out anything on the vehicle side and…
Kenda is the name of the tire manufacturer, and Loadstar is the name of the model or tread design of the particular tire. If you click on the second thumbnail photo under the photo on the product description page, and scroll your cursor over it, you…
We recommend that all trailer tires be inflated to the max psi stated on the sidewall of the tire. If the tire is under inflated, the weight capacity is lowered to an unknown amount for that tire. Although running lower air pressures can improve the…
It sounds like you have a classic ground issue with the Curt T-Connector Vehicle Wiring Harness part #C56348. When testing the 4-Way with a tester like Curt LED 4-Way Flat Connector (Vehicle End) Tester part #I26 the right turn like should only light…
The psi of your trailer tires will be listed on the side wall. It will list the max psi which is what you will want to fill them to regardless of how much weight you have. For reference, the 4.80 x 12 tires we carry have a 60 psi max for load range B…
The bolts for the Curt Trailer Hitch Receiver #C13240 are M10-1.25 x 30 inch hex bolts, and they are already threaded. I have added links below for you to check out of the instructions and a video install on a 2020 Hyundai Tucson of the Curt Trailer…
