Custom Fit 2015 Ford F-250 Super Duty Accessories

I recommend installing the Firestone Ride-Rite Air Helper Springs #F2597 on your 2015 Ford F-250 Super Duty. This has a 5,000 lb weight capacity (although it only helps handle the load and won't increase the truck's weight capacity)…

The mounting holes are 3" apart on center and 1" from the top on the Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 2" Ball - Bolt On - 3,500 lbs #CT-3002-Z.

If the ARE Camper Shell already has a set of tracks installed then you can use the Rhino-Rack Vortex Crossbar System part #RRVA165B-RRRLT600 along with two sets of the Rhino-Rack J-Style Kayak Carrier part #S512 in order to carry up to two kayaks.…

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally…

There are ways to get rails on the top of your camper shell, but the Buyers Products Over-The-Cab isn't the best option. For that you need to have access to the bed rails and with the camper shell on top of your bed we won't be able…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

For side to side stability on your camper the SumoSprings like #TSS-107-40 is going to be the bigger improvement than an upgraded equalizer. An upgraded equalizer will basically cushion the ride quality but it won't make a significant change…

Interesting. We don't have that specifically, but there are a couple of routes you could go. Most trailers will use the Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs - Qty 1 #TJSC-24 for stability in the corners so you could…

The only option to add a jack to your trailer with that tongue would be to drill in and attach it to the front of the trailer itself. You could use the Round Swivel Marine Jack w/ Wheel #MJ-1206B and bolt it straight onto the frame instead of using…

The widest tire size that fits a 12 inch wheel is the 145/80-12 like the part #AM10140 which has a section width of 5.7 inches. This will be right at an inch wider than what you currently have.

I have attached a photo for you that shows what the factory prep package looks like. This package contains a set of five holes in your truck bed for use with 5th wheel and gooseneck accessories. If you did have this package then most likely you…

That is correct, you can tap into the plug and it will provide a charge but keep in mind that this is not the most efficient way for charging a battery. This method does not provide any charge balancing or battery charge management and on newer…