Videos
for Ford Escape Owners
Help Articles
for Ford Escape Owners
Expert Answers
for Ford Escape Owners
Just looking at your Tern HSD bike with fenders, I'm going to say no the Saris MHS Bike Rack for 1 Bike #SAR23MR is not going to work. I did some research and it looks like a lot of Tern owner's went with the Hollywood Racks Sport Rider SE…
view full answer...Converters are required when a vehicle has what is called a 3-wire or separate lighting system. These systems will have turn signal circuits that are separate from the brake light circuits. Trailers use a 2-wire or combined system meaning the brake…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…
view full answer...There are indeed quite a few trailer hitch options for a 2019 Ford Escape but they can all be broken down into two categories, concealed cross tube and visible cross tube. The concealed cross tube option I recommend is the Draw-Tite Max-Frame Trailer…
view full answer...We do sell replacement hardware for all of the hitches we carry with the part #RHK but you might check down in the hitch tube to see if the hardware is taped up in there as that's sometimes where it's stored in shipping.
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...Unless you are towing all the time it is a good idea to store your 4-pole wiring harness inside the car to protect it from the weather and potential damage. Yes, many folks prefer an external mount and hitches often come with a mounting bracket to…
view full answer...For what you described we do have a brake controller situation but it will not involve any of the factory wiring of the 2015 Ford Escape aside from the factory 4-way at the rear of it. You would need to convert the 4-way to a 7-way so that you can…
view full answer...I took a look at the online owner's manual for your 2016 Ford Escape and it looks like the trailer tow module fuse will be located in the F26 position inside the luggage compartment fuse panel. This fuse panel is in the luggage compartment behind…
view full answer...The 3 trailer hitches with the most hidden receivers for your 2019 Ford Escape are the Curt #C13186, the Draw-Tite #75782, and the etrailer.com #e98866. Since they all have the same profile it really boils down to what style suits you best. If you…
view full answer...The install time/cost for installing a hitch on a 2013 Ford Escape depends on which hitch you end up going with. For example the concealed crosstube hitch #e98866 is listed as taking about 1.5 hours for an average Joe to install and about half that…
view full answer...