Custom Fit 2012 Subaru Forester Accessories

Other than the fact that the Curt #13147 has a slightly higher (500 lb) towing capacity and the fact that the hitch crossbar is round instead of square tubing, there's not a whole lot of difference functionally between the hitches you mentioned.…

The 13 cu ft Inno Wedge Plus Rooftop Cargo Box #INBRM864MBK overhangs the forwardmost crossbar by about 19" (see attached) - I confirmed this with my contact at Inno.

Don't worry about it. I'll be happy to make you a list. Feel free to email me back with any questions. Trailer Hitch - etrailer Trailer Hitch item #e59AR Wiring Harness - Curt T-Connector Vehicle Wiring Harness item #C56040 Ball Mount Kit -…

The Thule Hullavator Kayak Carrier #TH898 weighs 40lbs, requires crossbar space of 28-1/2", and the crossbars need to extend past the roof rack legs by at least 4" on each side. So in order to fit two on your Subaru Forester, you will need…

Yes, the etrailer Trailer Hitch Receiver #e59AR 2013 is confirmed to fit your Subaru Forester. I really like the matte black finish because it looks more rugged and is more durable than the classic glossy finish we see on all of the other hitches.…

We had a similar issue here with an employee here and what he ended up doing was getting a second narrower fairing to attach to the lower section of the main fairing to bridge the gap between the fairing and the roof. Since the Rhino Rack fairings…

Roof racks can create wind noise like what you described, but there is a solution that fixes this. The fairings like part #RRRF1 will divert the wind over the bars which will prevent the noise from being heard. This fairing would be the correct fit…

Thule only claims that the AeroBlade crossbars are quieter than other bars, which is true, but no roof rack will be silent, especially round and square bars. Just be glad that you didn't hear any flugelhorns! You can add a fairing, just not a…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Draw-Tite Max-Frame Trailer Hitch Receiver part #76182 will use the same mounting holes as the Draw-Tite Trailer Hitch Receiver part #36523. However, you cannot use the same fasteners that you have now as they are different sizes (1/2" vs…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

I checked with Aliner for availability of key number SM103 and and they do still have some keys for that lock. You can contact them directly for a replacement key. I sent their phone contact information to you. If you ever decide to replace the whole…