Custom Fit 2012 Chevrolet Sonic Accessories

Yes the camera part #VCMS17B would work with the monitor AOM713 that you have now.

Yes, you can get a replacement camera that will plug into the existing wiring but the monitor will require a slight modification to the harness. The Voyager RV Backup Camera Black #VGR84VR will be plug and play with your current camera system on your…

Before you begin flat towing your new 2012 Chevrolet Sonic, you will want to verify a few things first. If your vehicle has a 1.4 Liter engine and an automatic transmission, then it cannot be flat towed and must be towed using a tow dolly, like part…

The part you need is the Replacement M6 20 mm x 20 mm x 3.5 mm Square Carac Nut for Rhino-Rack Accessories - Qty 10, part #RR29TB. I have included a product description link below.

That is a strange issue to have. The issue may be with one of a few parts. It could be that the motor is stuttering before the steps are fully retracted causing them to retract as it thinks that it may be hitting something. The controller may be…

The correct Replacement Operator Mechanism for your model 4751KS MaxxAir MaxxFan is part #MA10-20281K-1AF. If your fan lid is unable to open even manually, then this is the part you need to replace. The other part you referenced, #MA10A04751KS would…

You would not lock out the steering on the vehicle being flat towed. Doing so would cause the wheels to scrub (drag sideways) when turning. The steering needs to be unlocked and the wheels will turn accordingly and straightened back out when needed.…

It really just depends on the application. But the 2.5-Watt Solar Battery Charger #PTW2997 will put up to a 2.5 watt charge on the circuit it is installed on.

There were two models of the Chevrolet Sonic lt in 2012. One is a 4-door sedan and the other model is a 5-door hatchback. If you have a 4-door sedan then the trailer hitch I recommend is the Curt part #C11240. This is a Class l trailer hitch and it…

A drawbar (or sometimes called ball mount), is the metal piece that slides into the hitch opening to provide the attachment point for a hitch ball for trailer towing. If you have no plans of towing with the part #24847 then you would not need the…

It sounds like you have a 7-way blade connector on your boat trailer as that is a very common connector on boat styles. This connector has 6 pins around the outside of the connector and a center pin for a total of 7. Part #A7WCB would be what a 7-way…

The braking pressure that the Invisi-Brake System #RM-8700 that you referenced comes from the factory set at is the most universal setting that works for most applications, 60 psi. You will want to test your setup using the preset setting and compare…