Custom Fit 2007 Ford F-150 Accessories

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

To install a 7-Way trailer connector on a 2007 Ford F-150 with a factory 4-Way, you will need to use #37185. This is part plug and play and part hardwire, but the hardwire locations are easy to access. You will need to ground the white wire to the…

It would probably be more beneficial to have a trailer hitch on the 2007 Ford F-150 because it is going to be the more capable vehicle. For a hitch, the most popular option is #75506. This is a Class III trailer hitch with a 2 inch receiver. I have…

Yes, for Dexstar wheel 17-384 it is a 5 on 5 bolt pattern. Not very common nowadays but we do have some options. Wheel #AM20428 is a spoke wheel with the 5 on 5 bolt pattern or the mini-mod version is #AM20446DX. We have other 15 inch wheels with the…

To install a brake controller in your 2008 Ford F-150 you would be able to use the brake controller port under the dash and you will need to complete the wiring at the rear of your vehicle to the 7-way at the rear of the truck. For a brake controller…

Since your boat trailer has a 7-way on it currently and has surge brakes what you would want is the 4-way to 7-way adapter part #37185 Kevin. Your 4-way will plug into this and all of the taillight functions of the 7-way will be active. If you also…

Most likely there is a bolt holding the factory bump stop on your 2014 F-150. You simply raise your truck up off the ground and use a 13mm socket to remove the bolt. Take a look at the video I included to see the removal of the bump stop and…

Yes, we've checked with Brophy in the past and their camper tie downs part #HSSF are perfectly compatible with the aluminum bed of the 2021 Ford F-150. Turnbuckle kit you'd also want the part #TDHP.

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

The Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle #AL57200 or the similar option #AL88200 that includes the internal jounce bumpers for additional protection are compatible with your B&W gooseneck hitch. These attach to the underside of…

A weight distribution system will be the best option we can offer to help improve stability while towing. These systems not only help better distribute the weight of the trailer across the vehicle so you don't have issues with braking or body…

The HappiJac Direct-to-Frame Truck-Mounted Camper Tie-Downs like part #LC182860 will work best with the HappiJac Original Turnbuckles for Camper Tie-Downs part #LC182898 when you replace the front turnbuckle j-hooks with the Replacement Threaded Hook…