Custom Fit 2005 Ford F-150 Accessories

Hey Joshua, the Aries Grille Guard part #AA3056 that you referenced that fits your 2005 Ford F-150 comes with the needed install hardware so you would not need to get that separately. If somehow you misplaced it we do have it as a replacement part…

If you have a Westin HDX brush guard (only option we have for your 2005 Ford F-150) the correct hardware kit you'd need is the part #57-201PK.

The hardware kit that attaches a Westin Sportsman grille guard #40-1395 (no longer available) to your 2005 Ford F-150 is the part #40-139PK. You should note that the hardware kits and grille guards are both made specifically for vehicle fits so you…

Unfortunately there are no plug-in adapters or harnesses that would allow you to replace the factory 4-way flat trailer connector with a 7-way or a 7-way and 4-way connector on your 2005 Ford F-150. To complete the installation for a brake controller…

If it's a slip-on rotor setup what you'll want is the Kodiak Disc Brake Kit part #K2R526S for each axle. This gives you a stainless steel rotor and caliper. We do not have any stainless rotors that will fit with the UFP calipers you have now.…

On your 2005 Ford F-150, I recommend using a circuit tester like #PTW2993 to determine the function of the orange and black/pink wires. I recommend first checking the orange wire which I believe is the 12V hot wire from your battery. This should…

The photo of your F-150's door jamb sticker indicates a gross vehicle weight rating (GVWR) of 6800-lbs. This is the most the truck itself can weigh, including passenger, cargo weight and trailer tongue weight. I checked the online owner's…

Based on your images your grille guard looks different from the Westin Sportsman Grille Guard Stainless #45-3820 that is custom fit for your 2018 Toyota 4Runner. This and the Black #40-3825 are the only Sportsman Grille Guards I can find that fit…

For 7k trailer axle springs like the #e64SR that you referenced the part #APT8 would work great. This comes with standard height hangers that are 2-1/2 inches tall for front and rear and for the center is 4-1/2 inches.

Hey Joshua, I noticed you referenced the bracket kit part #AABRKT-3056 which is the correct Aries grille guard bracket kit for your 2005 Ford F-150 but you should note that you can't take a grille guard from a different truck and have it fit a…

The Curt Trailer Hitch Receiver - Custom Fit - Class IV, #C14357, can fit the 2004 Ford F-150 truck if that has never had a factory installed hitch. The factory hitch uses part of the bumper structure and if removed aftermarket hitches will not be…

It looks like you've got a Westin HDX Grille Guard with Punch Plate - Polished Stainless Steel #57-2010 so you'll need the Replacement Installation Hardware Kit for Westin HDX Grille Guard with Punch Plate #57-201PK.