Custom Fit 2001 Ford Ranger Accessories

Most likely the yellow wire on your trailer is what carries the reverse or auxiliary power circuit and would be connected to the center pin of the 7-Way like #PK12706. This would line up with standard 7-Way wiring for a 5th wheel or travel trailer. I…

We have several exterior ladders that could potentially work for you and your trailer. Take a look at #LA-401. This ladder is 99-1/2 inches tall. It may require a little modification depending on the design of your trailer but it would work. I have…

The difference between load ranges varies based on the tire size and brand. When comparing two tires of the same size and brand, a load range D tire will always have a greater weight capacity and psi rating than a load range C. However, when…

If your 2006 Ford Ranger is a flareside 6 foot bed (narrower than a standard bed) you can use the Access #A22010139 roll-up vinyl cover. If you prefer a folding cover the Extang #EX92600 is a fit. If your Ranger has a standard 6 foot bed, you can use…

For your 2005 Ford Ranger 4WD the Timbren Rear Suspension Enhancement System, part #TFRR0504A, has a 3,000-lb weight capacity and is for use on the rear suspension. The Timbren Front Suspension Enhancement System, part #TFXF1004A, has a 1,000-lb…

I definitely recommend going with the bump stop jounce-style springs that you are referring to as these require no maintenance and are very easy to install. They drastically reduce rear sag and also help with the overall handling of your truck. Your…

Draw-Tite trailer hitch #75082 fits all models of the 2001 Ford Ranger including stepside models. I have included a link to the installation instructions for you and a link to a video showing a typical installation. If you plan on doing some towing I…

From what I have found, the FHK31019 hitch you are looking for is the same as the Curt Front Mount Trailer Hitch Receiver #C31063. This hitch has a 2" receiver with a line pull of 9,000 lbs and vertical load limit of 350 lbs. Keep in mind, the…

Draw Tite is actually made by the same company as Reese who no longer puts the brand name of Reese on their hitches. So what you'd want is the Draw Tite hitch part #75082 and you'd have basically a Reese hitch. This is a Class III hitch with…

The Hidden Hitch brand was discontinued a few years ago which is why the part number you referenced is no longer available. That hitch did have slightly higher capacities than the current hitches that fit your 2001 Ford Ranger like the Draw Tite…

For your 2004 Ford Ranger with a full size spare and stepside bed, I recommend the Curt Class III Round Tube Receiver Hitch #13138. This is a Class III trailer hitch that will provide a 2 inch receiver opening with a 400 pound tongue weight capacity…

You will still be able to use the trailer with the 4-Way after installing the 4 to 5-Way adapter, #20036. First, you could just remove the adapter if you wanted to and then plug in the 4-Way like normal while stowing the adapter in the truck. The…