Protect your gear and improve your truck's gas mileage with a custom-fit fold up, roll up, retractable or hatch style tonneau cover by Extang, Access, Truxedo, BAK Industries, Tonno Pro, Retrax or Craftec. These covers protect your truck bed from road debris and the elements while increasing towing performance and aerodynamics. Most covers provide a simple no-drill application which makes it easy to increase the appearance and functionality of your vehicle, and all tonneau covers offer either a fold-up, roll-up, retractable or easy removal design to allow you to adjust for any of your hauling needs.
Many fits and profiles are available for many of the most popular trucks such as Ford, Dodge, Chevy, and GMC. Find the custom-fit tonneau cover for your truck by entering the year on the left.
Videos
for Tonneau Cover
Help Articles
Expert Answers
The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR.…
The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.
The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.
Your 265/70R17 size tire is around 31-1/2 inches in diameter. You want to make sure the tire cover you get is large enough and doesn't have to be stretched over…
The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…
Actually our etrailer.com brand brake assemblies are rebranded AxleTek assemblies. So we have the 8k left and right assembly set #AKEBRK-8 which is most likely what you need but these are 12-1/4 inch in diameter by 3-3/8 inches wide and attach with…
Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only…
Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…
Unfortunately there are no plug-in adapters or harnesses that would allow you to replace the factory 4-way flat trailer connector with a 7-way or a 7-way and 4-way connector on your 2005 Ford F-150. To complete the installation for a brake…
There is a solution for you, but the lift kits you referred to such as #K71-725-02 will not work with welded on torsion axles. The best option is for you to simply remove your torsion axles and use the Timbren Axle-Less Trailer Suspension System…
Yep, you're exactly right; the distance from the center of the hitch pin hole to the welded gusset is indeed four inches on the Curt Ball Mount for…
Enter the year, make and model of your truck above to find custom a fit tonneau cover. We offer tonneaus for all types of trucks including Ford, Dodge, Chevy, GMC, Honda, Toyota, Nissan and Mazda. They are available from the highest quality manufacturers, such as extang, BAK, Access, Truxedo, Bestop and Craftec.
Tonneau Cover Accessories
Tonneau Cover Manufacturers
You may also be interested in...