B and W Anti-Rattle Clamp for 2" Hitch Receivers Spec Review Video

For your 2021 Grand Design Reflection 28BH 5th wheel you will need the following components. Kodiak Disc Brake Kit #K2HR526D Qty 2 Inner Bearing #25580 Qty 4 Outer Bearing #15123 Qty 4 Grease Seal #GS-2125DL(2.125" inner diameter) or…

Hi Tom, I've attached the wiring diagram for the Hydrastar Electric Over Hydraulic Actuator Kit for Disc Brakes #HBA16-252-82 below as well as a video I made where I'll walk you through the installation process.

Hey Terry! Safety chains like the Gen-Y #GY49GR you looked at will work with the MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR99MV. The safety chain slot can handle 3/8" or 5/16" so either size will fit. MORryde actually came out…

Currently the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter #RP85FR is the only adapter Lippert approves for use which will not void the Lippert Limited Frame Warranty. This information can be found in the Lippert document…

Hi Nick! The B&W Anti-Rattle Clamp for 2" Hitch Receivers #BW45FR will work with any standard 2" tow & stow, including the Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black #BWTS10048B. That…

Hey Jeff! The MORryde GooseTech 5th Wheel to Gooseneck Pin Box #MR97MV comes with a Demco eZ-Latch. The best option for a lock is the InfiniteRule Lock for Cast Demco eZ-Latch Trailer Couplers #IR66FR. This is designed to for a standard coupler but…

There are anti-rattle devices which could work with the factory hitch on your 2017 Toyota Highlander, though because it is covered you will need a pin-style and not a sleeve style such as the Malone MPG908 you referred to. The Anti-Rattle Receiver…

Hey Keith, thanks for reaching out, and great question. The etrailer Anti-Rattle Hitch Collar #e38FV is a new product for us, so I ran your question by the engineers who designed it. They are confident that the collar will work on a hitch with a lip…

I understand your frustration, I can help you out with this. **Global Link Replacement Strike Plate for RV Entry Doors - Steel #295-000022. If your strike plate is like the one above I suggest mounting it with the hole closer to the top of the plate.…

Hey Gregg, thanks for reaching out. We can definitely provide a spare pin for your etrailer Ball Mount #e87DR. That will be a standard 5/8" pin with a 3" span. Here is what you will need: - etrailer Trailer Hitch Pin and Clip for 2"…

Your flush bar style of roof rack is not compatible with the Thule Hullavator part #TH898 as it doesn't allow the rack to be carried off the side enough to not hit the vehicle with it is raised and lowered. You need a rack that has crossbars that…

Thanks for the pictures! I have a set of flush mounted crossbars that will work with your Kia's raised rails, however the Yakima RailBar Crossbars item #Y00447-2 won't work. They don't fit Kia's rails. It looks like they are for older…