1991 Ford Ranger 7 Foot Bed Tool Box

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal,…

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only…

The best hitch with a 2" receiver for your 2023 Kia Sportage is going to be the etrailer Hitch item #e38KR. This hitch is custom fit and bolts directly to your Kia with included hardware. This is a…

There are limited solutions for the tool box and rolling hard cover. I recommend the UWS Truck Bed Chest - Secure Lock Under Tonneau Series - 8.85 cu ft - Bright Aluminum #UWS08297 or the UWS Truck Bed Chest - Secure Lock Under Tonneau Series -…

We have the following Gen-Y shock absorbing 5th wheel pin boxes which are compatible with the Lippert Rhino pin box bolt pattern. The weights listed below are the maximum capacities the pin box is capable of supporting. 21,000 lbs - 3.5K TW #GY86GR…

The outside diameter of the Wire - Jacketed 6-Wire - per Foot #DW04906-1 is 1/2" including the vinyl jacket.

As you can see in the picture I've included, when rolled up the cover sits lower than a normal tool box. These tend to sit about 3-5 inches above the rails of the truck. The access Tollbox Edition…

I have a great tonneau cover for your 2022 Sierra 3500 that will accommodate your tool box and be long enough for an 8' bed. It is the Access Toolbox Edition Soft, Roll-Up Tonneau Cover item #A62439.…

The Correct Track Trailer Alignment and Lift Kit #RR23QX will work with the Roadmaster Comfort Ride Shock Absorbers #RM-2460, but the whole Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks #RM-2460-2580 is designed to fit on a standard…

You will be able to use the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness #41157 to install a 7-way connector in the bed of your 2024 Toyota Tundra. I can see it uses the 7-Way/4-Way Connector #HM40975 which is used on most trucks…

We have checked directly with the manufacturer and confirmed that the Draw-Tite Front Mount Hitch #65076 will be a good fit for the 2023 Ford F-350 Dually. It will be a no-drill install, but you will have to temporarily remove and trim some of the…