1993 Dodge Ram Pickup Camper Tie-Downs

Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…

It sure is Michael! The TorkLift item #TL87DR includes both front and rear tie-downs for your 2024 Ford F-350 with a 8' bed. Please note that the item #TL87DR are not compatible with factory flip-out steps that are mounted under the bed. What…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

Hey John, congrats on the new truck. Yes, the Brophy Slide In Camper Tie-Downs - Extra Clearance item #HSAB can be used with your 2026 Ram 3500 dually. What turnbuckles did you use previously with your 2021 Lance 865?

Hello Joeseppi, Let's get you into the right camper tie-down. Just as long as your 2021 Ford F-350 does not have factory flip-out steps that are mounted under the bed you will want the TorkLift Tie Downs - Custom Frame Mount - Front and Rear…

Hey Keith! The TorkLift Talon Truck Camper Tie-Downs item #TL25SV combo will fit your 2025 Ford F-350 if your truck has the TorkLift SuperHitch Magnum 30k item #TL27CR installed. If you have the factory hitch or an aftermarket hitch you'll need…

Hey Jake, thanks for reaching out! You'll actually want to keep the OEM hitch on your 2005 GMC Sierra 2500 to install some TorkLift tie-downs as there aren't any TorkLift tie-downs that fit with the SuperHitch Original #TLC1204. For your OEM…

Unfortunately we do not have a video of the HappiJac Truck-Mounted Camper Tie-Downs #LC184089 being installed. The Rear anchors are installed in the end of the bumper. There is no precise mounting location since a variety of bumpers may be installed.…

Hello Bart, thanks for reaching out. I can definitely point you in the right direction, but I will need a bit more information on your truck before I can recommend the correct tie downs. Can you please answer the following questions for me? 1. What…

There is no weight capacity for the Brophy Clamp On Camper Tie-Downs #HSSF. The tie-down hardware kit #TDHP, that is used to secure the camper to the #HSSF tie-downs has a weight capacity of 3,000-lbs. My contact at Brophy said the tie-downs will…