2007 Chevrolet Impala Vehicle Air Mattress

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Jeremy, Typically with boat trailers the manufacturer will install hydraulic surge brakes because you don't have to worry about the water damaging wires like you would with electric brakes. That being said, if you use a heat…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

To tow a trailer with your 2024 Toyota Grand Highlander Hybrid you will need the following parts: Trailer Hitch - Draw-Tite Max-Frame Trailer Hitch Receiver item #DT95PR. This is a custom fit class III hitch with a 2" receiver. It…

Hey Bob, There is indeed a loading ramp from Thule that will work with any of the Epos bike racks - the Thule Epos 3-Bike Rack #TH69XE, Thule Epos 2-Bike Rack w/ LED Lights #TH49XE, and Thule Epos 2-Bike Rack #TH99XE. I went ahead and verified for…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The…

For a 55 lbs bike you're definitely going to need to use a hitch mounted bike rack. No roof mounted bike rack has that high of a capacity. The best one for your EMTB is going to be the Thule Epos Bike Rack item #TH99XE. This is our…

Since your 2024 Telluride X-Line is not an LS or S model the correct wiring harness is the Curt #C29ZV. This will plug into the connection points in the rear cargo area and provide you with a 4-way to power your trailer's signal…

Since the instructions for the Blue Ox SwayPro Weight Distribution #BXW1000 state that any air-ride shock absorbers, air springs, or automatic leveling systems need to be disabled or deflated to the manufacturer's minimum…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

Functionally speaking, there isn't a huge difference. The Curt #C56382 has a slightly lower capacity at 3 amps for circuit for stop/turn signals and 6 amps for taillights. The Tekonsha #118781 has a capacity of 5 amps per stop/turn…