Separate wiring system - brake and turn signals are sent along separate wires. A converter is required unless the vehicle is equipped with a tow package plug. The tow package plug has already been converted.
Custom Fit Vehicle Wiring Specs:
Plug-In Location:
Features:
...to disconnect the wiring when you unhook your trailer. If you drive off without disconnecting a standard 7-way plug, the connector will get pulled out of the socket, likely tearing off the lid. Without a lid...
Installation Notes:
For vehicles with factory tow package; may require additional components or may be used as a replacement harness
This wiring is intended to be used with the 319-S7-07 trailer side plug, which is sold separately.
If your trailer has conventional 7-way wiring, this wiring harness is made compatible with an EZConnect Adapter, which is sold separately.
More Information >Custom Fit Vehicle Wiring Specs:
Plug-In Location:
Features:
...Limited 1-year warranty Installation This custom-fit T-connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper, along the driver's-sid...
Installation Notes:
For vehicles with factory tow package; may require additional components or may be used as a replacement harness
More Information >Custom Fit Vehicle Wiring Specs:
Features:
...7- and 4-Pole trailer connector with mounting bracket Has high-impact, ABS plastic construction Stainless steel spring for easy cover operation Rubber gasket provides weather-resistant...
Installation Notes:
Product intended as a factory replacement harness or socket
More Information >Trailer Wiring Specs:
Features:
...Replacement 7-pole, sealed socket, RV-style trailer connector High-impact nylon construction Resists corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents leaks...
More Information >Custom Fit Vehicle Wiring Specs:
Plug-In Location:
Features:
...with your existing 7-way wiring harness. Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended...
Installation Notes:
For vehicles with factory tow package; may require additional components or may be used as a replacement harness
More Information >Custom Fit Vehicle Wiring Specs:
Features:
...and hardware Comes with protective covers for connectors Assembled in the USA Limited 1-year warranty Installation This custom-fit connector plugs into your vehicle's factory tow package wiring harn...
Installation Notes:
For vehicles with factory tow package; may require additional components or may be used as a replacement harness
More Information >Custom Fit Vehicle Wiring Specs:
Plug-In Location:
Features:
...with 5-pole and 6-pole adapters (sold separately) Multi-Plug design is ideal for towing trailers with different style trailer connectors Simple installation - no cutting or splicing required Harness plugs...
More Information >Custom Fit Vehicle Wiring Specs:
Plug-In Location:
Features:
...powder in cable keeps moisture away from wiring Plug holder and dummy plug keep terminals from becoming exposed when connectors are not in use Quick and easy installation Plug wiring harness into vehicle ...
Installation Notes:
For vehicles with factory tow package; may require additional components or may be used as a replacement harness
More Information >Custom Fit Vehicle Wiring Specs:
Plug-In Location:
Features:
...T-connector plugs into your factory tow package wiring harness. It is designed to tee into the back of your existing 7-way connector at the rear of your vehicle. Your 7-way trailer connecter will retain its...
More Information >Custom Fit Vehicle Wiring Specs:
Features:
This socket is designed to fit into a pre-existing cutout on 2007-2013 GM 1500 trucks and 2007-2014 GM 2500/3500 trucks. Twist-in connector also serves as a replacement for OEM sockets on GM trucks 1999-2013 that came with factory tow packages.
More Information >Custom Fit Vehicle Wiring Specs:
Plug-In Location:
Features:
...separately) also available Made in the USA Specs: Wiring harness length: 2' Limited lifetime warranty This vehicle-end trailer connector gives you the functionality of a 7-way, but without any p...
Installation Notes:
For vehicles with factory tow package; may require additional components or may be used as a replacement harness
This wiring is intended to be used with the 319-R7-07 trailer side plug, which is sold separately.
If your trailer has conventional 7-way wiring, this wiring harness is made compatible with an EZConnect Adapter, which is sold separately.
More Information >Custom Fit Vehicle Wiring Specs:
Features:
Replace the worn or damaged 7-way, RV-style trailer connector on your tow vehicle with this sealed, vehicle-end socket. Spring-loaded dust cover protects the copper-plated terminals. Easy installation - plugs into OEM port.
Installation Notes:
Product intended as a factory replacement harness or socket
More Information >Custom Fit Vehicle Wiring Specs:
Plug-In Location:
Features:
...to reverse lights to allow proper functioning of hydraulic brake actuator Compatible with 4-way flat trailer connectors Connects quickly and easily - no cutting or splicing of wires Locate connection point...
More Information >Custom Fit Vehicle Wiring Specs:
Features:
...tow package wiring harness, which is located behind your rear bumper. Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket...
Installation Notes:
For vehicles with factory tow package; may require additional components or may be used as a replacement harness
More Information >Custom Fit Vehicle Wiring Specs:
Plug-In Location:
Features:
...and hardware Comes with protective covers for connectors Assembled in the USA Limited 1-year warranty Installation This custom-fit connector plugs into your vehicle's factory tow package wiring harn...
Installation Notes:
For vehicles with factory tow package; may require additional components or may be used as a replacement harness
More Information >Custom Fit Vehicle Wiring Specs:
Videos
for Custom Fit Vehicle Wiring
Help Articles
for Custom Fit Vehicle Wiring
Expert Answers
for Custom Fit Vehicle Wiring
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...I&…
view full answer...If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly -…
view full answer...Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846.…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...Normal operating temperatures for drum brakes range from 150-400 degrees F. During certain stopping conditions the brake heat can exceed 600 degrees. The effectiveness and stopping power of the brakes is significantly reduced at these higher…
view full answer...I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the…
view full answer...The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.
view full answer...