2012 Starcraft Comet Camper Spare Tire Cover

CE Smith Spare Tire Cover #CE27440 is designed to be slipped over a mounted spare tire. It does not require you to unbolt the spare from the trailer or tire carrier. If you refer to the linked photo you'll see how the elastic hem snugs the cover…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Hey Kelly! It looks like our information shows your tire size is 205/75R14. However, I would double check the tire size on the side of your existing tires to see if that matches. Are you looking for just a tire or a wheel and tire combo? Assuming you…

The overall tire diameter of your size 225/75-16 is 30-1/4 inches so for a spare cover that would fit that tire size well we have the Rampage #RA773201 which fits this size and is made of a higher quality material than other similar covers so it will…

Yes the hitch mounted spare carrier part #6715 can fit the hitch you have at the rear of your Minnie Winnie.

Your tire size is 30.4 inches in diameter. So for a cover you'd want the #RA773201 for a black cover that matches that size and would work well.

The 225/75-16 tires are about 29.29" in diameter. For that size I recommend Rampage Spare Tire Cover part #RA773201 which fits 30" to 32" diameter tires. It is a nice black UV-resistant material to avoid breaking down over time. The…

The closest fit black spare tire cover that we offer for your ST205/75-14 size tire with a 26 inch diameter is the Bestop #B6102601. This spare tire cover has a diameter of 26-1/2 inches, which is only slightly larger than your trailer tire's…

Hello Steve, thanks for reaching out. The Kenda tires are made in China like most other trailer tires. As far as the Kenda Karrier KR53 ST205/75R14 Radial Trailer Tire with 14" Black Mod Wheel #KE75EV, the wheel itself is made here in the USA,…

Hey Kirk, yes the etrailer Spare Tire Mount for Hitch #e98ZR that you referenced will work great to carry a wheel and tire size ST235/80R16 like you mentioned. Do you already have a spare picked out?

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

Hey Rick! If you aren't concerned about the appearance of the wheel since it is a spare you can use the Karrier #AM32545 (if you have a 5 on 4-1/2 bolt pattern) or the #KE64WV (if you have a 6 on 5-1/2 bolt pattern). If you just want the wheel…