2007 Vehicle Snow Plows

Hey Bruce! The support bar mounting issue you pointed out is why I am going to steer you away from using the Curt Front Hitch item #31302 to attach a snow plow on your 2006 Yukon. Those support bars on the SnowBear Snowplow item #K2AVAL8219…

Hey John, thanks for reaching out! It all depends on what snowplow you go with. For example, the Agri-Cover SnowSport LT #SS98GV requires 8" - 14" of clearance under the receiver, while the Detail K2 Snowplow #K2AVAL8826 requires a hitch…

For your 2006 Honda Ridgeline, the K2 Avalanche plow is only a fit for the front mounted receiver. The custom mount brackets #K286110 are not a direct fit for your Avalanche plow but the mount does come with a crossbar and I've attached the photo…

Hey Matt, I'd be happy to confirm that with you. The Konig Tire Chains #TH01594267 is compatible with your 260/70R17 tire size and is class s compatible for tighter clearance wheel wells so it would be a fit for your 4Runner. Searching through…

Hello Rickey. The Curt Class 2 Hitch #C12181 is currently the only custom fit aftermarket hitch available for the 1991 Mitsubishi Montero and it uses a 1-1/4" receiver. The only way to add a 2" receiver to this vehicle would be to use a…

Hello Walt. We do have snow plow kits that will fit your 2006 Chevy Trailblazer 4x4. The #SS78GV you were looking at will fit, you just will need to install the front hitch #31055.

It is likely you can avoid the drain line when installing the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR by using the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications #MR43WR. I don't know exactly the…

To install the Curt Hitch part #C31068 on your 2014 Ford F-150 with Ecoboost you will need to remove the air dam and then trim a small section of the lower fascia. See photo.

That's a really valid concern about the install of the Draw Tite hitch #65079 on your 2021 Jeep Wrangler 4xe Rubicon. I personally am not a fan of snow plows that attach to front hitches as from experience here at etrailer they just aren't…

Yes, you will. The Curt Front Hitch item #C22NR will fit the 2024 GMC Sierra 1500 but it's not intended to be used on the AT4 models due to the extensive modification you need to do to the lower trim to get it to fit. The Draw-Tite item #DT44HR…

Both the SnowBear Proshovel Snowplow, with Electric Actuator #SB324-168 and the SnowBear Personal Snowplow, with Electric Winch #SB324-080 will allow you to easily raise and lower the snowplow, and both come with an in-cab toggle switch, as well as a…

Hey Steve, yes it does look like you can use the Replacement 2-Point Receiver Cup Cross Member for Snowbear Plow System #SB324-136 with your Snowbear Pro Shovel. I did some research and this is listed as a replacement part for your Snowbear Plow so…