Conserve battery power and help your pump last longer. This accumulator tank reduces cycling of your pump system, making it quieter by allowing the pump to reach shut-off pressure more smoothly. ... Features: Helps produce a smooth, controlled, uninterrupted flow of water in your RV Pushes water through pipes before initiating the pump Allows enough water flow to let you flush at night without waking others in the RV Decreases battery drain by reducing on/off pulsing cycle Reduces noise by allowing your pump to reach shut-off pressure more smoothly Semi-rigid rubber feet also reduce noise caused by vibration Made with a maintenance-free internal rubber membrane Mounts downstream from your pump Compact enough to fit in small spaces Connects to standard NPT connections Includes hose barb fittings for 1/2" hoses Specs: Overall dimensions: 7-7/8" long x 5" wide x 4-1/2" tall Mounting hole spacing (center to center): 4-1/8" Capacity: 0.75 liter Maximum pressure: 125 psi Pressure pre-charge: 10 psi Flow: 125 gallons per minute (GPM) Ports: Inlet: 1/2" male NPT Outlet: 1/2" male NPT Weight: 1 lbs
This motorized, self-priming pump creates smooth, consistent flow in your RV's fresh water system. Works as a direct replacement for a 3-gallon-per-minute, 12-volt pump.Features: Compact, motorized pump creates smooth, consistent flow in your RV's fresh water system Can be used as a direct replacement for a 3-gallon-per-minute, 12-volt demand pump Automatically turns on and off when it senses a pressure difference from your faucet Self-priming design Unit is capable of 6' vertical prime and 30' horizontal prime Internal bypass provides low cycling and low noise Durable and flexible feet reduce vibration and noise Built-in check valve prevents backflow Built-in strainer prevents unwanted debris from entering the pump Motor has precision ball bearing for long life Integrated thermal overload protection Can run dry without damage 1/2" Diameter hose fitting at inlet and at outlet Flexible, high-pressure fittings Designed with tapered seal for a watertight connection Mounts in any position 2-Wire connection 15 Amp fuse required Specs: Overall dimensions: 10-1/4" wide x 5-1/4" tall Voltage: 12 volts DC Maximum power draw: 10 amps Flow: 3 gallons per minute (11.3 liters per minute) Pressure setting: 55 psi (3.8 bar) Mounting hole dimensions (center to center): 3-1/4" long x 2-7/8" wide 2-Year warranty
Air in the lines, short cycling, and dry runs can interrupt water use in an RV. This self-priming pump clears air automatically, reduces cycling, and protects itself from heat and low-water situations to keep your water flowing where you need it.The result is steadier pressure and reduced vibration during everyday use. What Happens If You Run Out of Water? RV water systems don't always behave the way you expect. Tanks run dry, water demand changes quickly, and pumps end up cycling on and off more than they should.
This self-priming, AC-powered waterpump delivers steady flow for RV and marine systems. It clears air from the lines, reduces noise and cycling, and protects itself from overheating during extended or changing water demand.Quiet Operation for Indoor Water Systems Because this pump is designed for use in RVs, boats, and tiny homes, noise control matters. The noise-dampening design helps reduce vibration and sound during operation, making it better suited for living spaces where pumps are installed nearby.
If the manual faucet in your RV no longer primes, replace it with this self-priming faucet. Hand pump lets you conserve water and power when camping. Fits a 1-3/4" access hole with a 1/4" FPT fitting. Plumbing hookup not included.Features: Self-priming, manual water faucet with hand pump replaces an old or leaking faucet in your RV Pull down on lever to pumpwater from your fresh-water tank through the faucet Lets you conserve water and power when camping because no electrical pump is needed Chrome plating resists corrosion Requires 1-3/4" access hole with 1/4" FPT female connection Mounting hardware included
Motorized, self-priming pump creates a consistent flow of fresh water to your RV or camper. Works as a direct replacement for a 115-volt pump. The quiet pump has a check valve to prevent backflow and a thermal breaker to prevent overheating.The pump has been thoroughly freeze and thaw tested for up to 5 two-hour cycles, and it was tested with a higher pressure at shutoff than other waterpumps.
Motorized, self-priming pump creates a consistent flow of fresh water to your RV or camper. Works as a direct replacement for a 12-volt pump. The quiet pump has a check valve to prevent backflow and a thermal breaker to prevent overheating.The pump has been thoroughly freeze and thaw tested for up to 5 two-hour cycles, and it was tested with a higher pressure at shutoff than other waterpumps.
Enjoy the comfortable water pressure of home with this self-priming, on-demand waterpump. Supplies consistent water flow for up to 4 fixtures. Includes a check valve to prevent backflow.It's also energy efficient and runs quietly. No-Mess Self-Priming There are 2 types of pumps you can get for your RV: one that requires manually priming every time you run your fresh water tank dry, and one that primes automatically.
Enjoy the comfortable water pressure of home with this self-priming, on-demand waterpump. Supplies consistent water flow for up to 2 fixtures. Includes a check valve to prevent backflow.It's also energy efficient and runs quietly. No-Mess Self-Priming There are 2 types of pumps you can get for your RV: one that requires manually priming every time you run your fresh water tank dry, and one that primes automatically.
Enjoy the comfortable water pressure of home with this self-priming, on-demand waterpump. Supplies consistent water flow for up to 4 fixtures. Includes a check valve to prevent backflow.It's also energy efficient and runs quietly. No-Mess Self-Priming There are 2 types of pumps you can get for your RV: one that requires manually priming every time you run your fresh water tank dry, and one that primes automatically.
Enjoy the comfortable water pressure of home with this self-priming, on-demand waterpump. Supplies consistent water flow for up to 2 fixtures. Includes a check valve to prevent backflow.It's also energy efficient and runs quietly. No-Mess Self-Priming There are 2 types of pumps you can get for your RV: one that requires manually priming every time you run your fresh water tank dry, and one that primes automatically.
Enjoy the comfortable water pressure of home with this self-priming, on-demand waterpump. Supplies consistent water flow for 1 fixture. Includes a check valve to prevent backflow.No-Mess Self-Priming There are 2 types of pumps you can get for your RV: one that requires manually priming every time you run your fresh water tank dry, and one that primes automatically.
Enjoy the comfortable water pressure of home with this self-priming, on-demand waterpump. Supplies consistent water flow for up to 2 fixtures. Includes a check valve to prevent backflow.Features: Heavy-duty waterpump provides a reliable flow of fresh or salt water in your RV or boat Comfortable water pressure makes your RV feel like home 2-Chamber diaphragm ensures high-volume water flow for up to 2 fixtures Durable, abrasion- and corrosion-resistant santoprene construction Self-priming unit removes air from pipeline, preventing delays and water spitting out of the faucet Unit can be hidden from view because it doesn't require manual priming Internal check valve prevents backflow contamination of your clean water supply Automatic start-and-stop pressure switch helps prevent damage to the pump Shuts the unit off if it becomes overloaded and starts to overheat Turns the unit back on once core temperature reaches a tolerable level Made for intermittent duty, but can run dry during priming without damage to the unit Quiet operation - comparable to an indoor electric fan Semi-rigid rubber base minimizes vibrations and is tear and corrosion resistant Durable, energy-efficient, copper-core motor generates minimal heat Enclosed housing and sealed switches prevent damage caused by moisture Included filter prevents debris from entering and damaging the unit Simple installation Connects to standard NPT connections - includes hose barb fittings for 1/2" hoses too Mounts in any position using bolts (hardware not included) Can be mounted in a location higher than the water tank Compatible with 12V DC systems Specs: Overall dimensions: 7-3/8" long x 3-7/8" wide x 2-3/8" tall Mounting hole pattern (center to center): 2-1/4" long x 3-1/8" wide Ports: Inlet 3/8"-14 male PT Outlet: 3/8"-14 male NPT Maximum power draw: 5.04 amps Flow: 1.3 gallons per minute (GPM) Maximum pressure: 100 psi Maximum water temperature: 140 F 2-Year limited warranty
Make filling your fresh water tank or diesel generator easy with this inline booster pump. Can be used to empty bad gas from your tank. Easily clamps onto your 12V battery. ... Features: Booster pump increases flow of fresh water, saltwater, or diesel fuel Easily move water from a source into your RV's fresh water tank Quickly fill your generator or easily empty a tank of bad fuel Use with your bilge pump to remove water from your boat faster Portable design lets you use pump when and where you need it Submerse in water to use as a self-priming, gravity-fed water supply pump Install vertically above the water source to use as an inline pump - requires priming Connect tubing easily to hose barbs Remove strainer when installing as an inline pump to connect tubing Compatible with 12V DC systems Cables with heavy-duty clamps easily attach to battery Constructed of lightweight, durable materials Specs: Pump dimensions: 6-15/16" long x 1-5/8" diameter Wire lead length: 16' Maximum power draw: 7.5 amps Flow: 266 gallons per hour (GPH) Runtime: 20 minutes Maximum water temperature: 176 F Diesel: 104 F 4-Year limited warranty Pump Installation If you want to install this booster pump in your RV's fresh water system, you have 2 options.
Still pumpingwater by hand at the galley? This 12V inline pump drops into the tank and delivers up to 3.17 GPM of powered flow. Its narrow 1-7/16" body fits compact tanks and runs on a 5-amp circuit for steady faucet water.Features to know about Powered Upgrade From Manual Pumps Hand or foot pumping gets old fast when you just need running water at the galley. This 12V DC inline pump replaces manual effort with powered flow rated up to 3.17 GPM (12 LPM at 0 m head).
Still pumpingwater by hand at the galley? This 12V inline pump replaces manual work with powered flow. Its narrow 1-7/16" body drops into tight tanks and runs on a 5-amp circuit, delivering steady faucet water from a simple 12V setup.Switch-Based System Compatible: Designed for pressure switch and microswitch galley systems. 12V 5-Amp Circuit: Runs on 12V DC with a 5-amp fuse and 3' cable for clear electrical setup. Fuel Transfer Option: Also suitable for pumping diesel when a compact 12V transfer pump is needed. Certified Marine Compliance: CE certified, ISO 8846, ISO 10133, and ABYC H-23 Features to know about Powered Upgrade From Manual Pumps Hand or foot pumping gets old fast when you just need running water at the galley.
Easily empty your black water tank, fish box, or livewell with this self-priming macerator pump. 4-Blade chopper reduces risk of clogs. Pushes waste through hose (not included) for cleaner dumping.Features: Macerator pump lets you easily empty your black water tank, fish box, or livewell Helps prevent smells in your boat's bilge Makes dumping your RV's tank faster and more efficient Stainless steel, 4-blade chopper reduces risk of clogging by grinding waste before pumping overboard Perfect for fish scales and residual gunk Cannot handle rags, feminine products, or hard objects Thermally protected sensor allows the pump to run dry long enough to self-prime Prevents overheating during priming and allows time to determine when the black water tank is empty Capable of 5' lift when wet and 4' lift when dry Does not require a trestle system for gravity drainage Helps keep black water drainage tube clean by pushing waste through Flexible rubber impeller is durable and helps create a pulseless flow Anti-clogging mechanism lets you remove clogs without having to disconnect hoses Rear cover plate removes, revealing a shaft that can be turned with a screwdriver Manual function lets you use pump even if you lose power Quiet operation - rubber feet help prevent vibration Durable, powder coated housing and triple-sealed motor are corrosion resistant Compatible with 12V DC systems Easy, bolt-on installation Mount near the tank for optimum performance Specs: Overall dimensions: 11-3/16" long x 5" wide x 3-7/8" tall Base dimensions: 3-1/8" long x 4-11/16" wide Mounting dimensions: 2-5/16" long x 3-3/4" wide Maximum power draw: 12 amps Flow: 12 gallons per minute (GPM) Ports: Inlet: 1-1/2" male NPT and 1-1/2" hose barb Outlet: 1" hose barb 4-Year limited warranty
Replaces the valves for your holding tanks. Valve passages allow wastewater to travel freely when valves are open. 72" Flexible cable lets you install handle where you want it. Valve bodies, cables, seals, and hardware included.Features: Replacement valves for your RV's gray-water tank and black-water tank Passages allow wastewater to travel freely when valves are open 72" Flexible cables let you install valve handles where you want them Cables allow valves to be placed in secure locations or hard-to-reach places Inner wires are constructed of stainless steel Valve bodies, flexible cables, 3" seals, 1-1/2" seals, nuts, and bolts included 1-Year warranty To install, remove the broken waste valve and seals from your holding tank.
Twist-on adapter converts your black-water tank valve into a hook-up for a gray-water waste hose. 3/4" Female NPT ends threads onto gray-water hose. Plug prevents drips when hose is not connected. ... Features: Twist-on drain adapter converts your black-water tank valve into a hook-up for a gray-water waste hose 3/4" FPT connection allows 1/2" or 5/8" gray-water hose to hook-up to adapter Plug prevents drips when hose is not connected Designed for use with bayonet sewer fittings Adapter fitting with bayonet hooks (sold separately) may be needed for installation Raised grip makes it easy to rotate on and off 1-Year warranty
Twist-on valve is designed to be a quick fix for your RV's black-water waste valve issues. 3" Diameter passage allows wastewater to travel freely when valve is open. Bayonet hooks twist onto existing valve. ... Features: Twist-on valve is designed to be a quick fix for your RV's black-water waste valve issues 3" Diameter passage allows wastewater to travel freely when valve is open Bayonet hooks twist onto existing valve Lug fitting end secures to sewer hose No clamps needed Creates seal Specs: Length with valve open: 12-3/4" Length with valve closed: 9-1/2"
Empty your black-water tank at the push of a switch and stop stooping over and struggling with manual sewer valves. This is pre-assembled and prewired for installation. ... Features: Electric valve replaces your existing electric or manual black-tank sewer valve High torque, water resistant motor is certified for at least 6,000 cycles Valve can be operated manually if needed Switch is placed near your wet bay or anywhere else that is convenient Warning light lets you know valve is open Specs: Application: 3" sewer pipe Voltage: 12V Power draw: 2.5 amps Wiring harness length: Switch: 3' Valve: 4' 3-Year warranty
Replace the waste valve from your RV's gray-water tank with this cable-actuated gate valve. 72" Cable lets you open and close the valve even if it's in a hard-to-reach place. ... Simply install the valve between your RV's sewer pipes and mount the handle on the end of the cable in a convenient, easy-to-access place. When you're ready to dump your gray-water tank, just pull the handle to open the valve. And when you're finished dumping, just push the handle back in to close the valve.
Replace the standard waste valves on your RV's black- and gray-water tanks with these electric ones so that you can open and close the valves with the flip of a switch. Light indicates when valves are open.Features: Electric waste valve replaces or upgrades the waste valves on your RV's black- and gray-water tanks Easy operation with the flip of a switch Valves open to allow flow from your black- or gray-water tank Light comes on when valve is open Tool-free manual override Remove pin, turn handle, and pull handle to open valve High-torque, water-resistant electric motor Built-in 5-amp breaker provides circuit protection Resets with a push of a button - no fuses to replace Wiring harness, black and gray switch plates, seals, hardware, and installation instructions included Switch plate installs in RV's control compartment ABS solvent bond (A05-0303) sold separately for installation of valve Compatible with 12V systems Specs: Passage diameter: Gray-water fittings: 1-1/2" Black-water fittings: 3" Valve harness: 4' long Switch harness: 3' long Power draw: 2.5 amps 3-Year warranty
Replace the waste valve from your RV's black-water tank with this cable-actuated gate valve. 36" Cable lets you open and close the valve even if it's in a hard-to-reach place. ... Simply install the valve between your RV's sewer pipes and mount the handle on the end of the cable in a convenient, easy-to-access place. When you're ready to dump your black-water tank, just pull the handle to open the valve. And when you're finished dumping, just push the handle back in to close the valve.
Filters
