... All-in-one waterproof trailer light serves 5 functions: brake, tail, turn, backup, and warning light. Four flash patterns can be wired to synchronize. Hardwired and ready to install. Recessed mount with grommet (sold separately).Features: Oval trailer tail light with smooth, bright red exterior serves 5 functions Stop light - outer band of light brightens and center LEDs illuminate Tail light - outer band lights up Turn signal light - inner X of LEDs flashes white Backup light - center LEDs light up Warning light - inner X of LEDs flashes amber 4 Flash patterns can be synchronized when multiple lights are connected Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red, white, and amber LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Recessed mount with black grommet (A70GB - sold separately) - hardware not included Hardwired and ready to install DOT compliant Meets FMVSS 108 requirements for automotive lighting Specs: Wire configuration: Black: tail Red: stop/turn Brown: backup Blue: flash pattern selection Yellow: sync Green: amber warning Orange: white warning White: ground Overall dimensions: 6-7/16" long x 2-1/4" tall x 1" deep Wire length: 8-1/16" Diodes: 20 Voltage: 12V Lifetime warranty on LEDs
... All-in-one waterproof trailer light serves 5 functions: brake, tail, turn, backup, and warning light. Four flash patterns can be wired to synchronize. Hardwired and ready to install. Flush mount with built-in flange. 20 Diodes.Features: Round trailer tail light with smooth, bright red exterior serves 5 functions Stop light - outer band of light brightens and center LEDs illuminate Tail light - outer band lights up Turn signal light - inner X of LEDs flashes white Backup light - center LEDs light up Warning light - inner X of LEDs flashes amber 4 Flash patterns can be synchronized when multiple lights are connected Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red, white, and amber LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Flush mount with buit-in black flange - hardware not included Hardwired and ready to install DOT compliant Meets FMVSS 108 requirements for automotive lighting Specs: Wire configuration: Black: tail Red: stop/turn Brown: backup Blue: flash pattern selection Yellow: sync Green: amber warning Orange: white warning White: ground Overall dimensions with flange: 5-1/2" diameter x 1" deep Light face diameter: 4-5/16" Wire length: 8" Diodes: 20 Voltage: 12V Lifetime warranty on LEDs
... All-in-one waterproof trailer light serves 5 functions: brake, tail, turn, backup, and warning light. Four flash patterns can be wired to synchronize. Hardwired and ready to install. Flush mount with built-in flange. 20 Diodes.Features: Oval trailer tail light with smooth, bright red exterior serves 5 functions Stop light - outer band of light brightens and center LEDs illuminate Tail light - outer band lights up Turn signal light - inner X of LEDs flashes white Backup light - center LEDs light up Warning light - inner X of LEDs flashes amber 4 Flash patterns can be synchronized when multiple lights are connected Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red, white, and amber LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Flush mount with buit-in black flange - hardware not included Hardwired and ready to install DOT compliant Meets FMVSS 108 requirements for automotive lighting Specs: Wire configuration: Black: tail Red: stop/turn Brown: backup Blue: flash pattern selection Yellow: sync Green: amber warning Orange: white warning White: ground Overall dimensions: 7-1/2" long x 3-5/16" tall x 7/8" deep Wire length: 8-9/16" Mounting holes: 6-15/16" Apart on center (horizontal) 2-3/4" Apart on center (vertical) Diodes: 20 Voltage: 12V Lifetime warranty on LEDs
... All-in-one waterproof trailer light serves 5 functions: brake, tail, turn, backup, and warning light. Four flash patterns can be wired to synchronize. Hardwired and ready to install. Recessed mount with built-in grommet. 20 Diodes.Features: Round trailer tail light with smooth, bright red exterior serves 5 functions Stop light - outer band of light brightens and center LEDs illuminate Tail light - outer band lights up Turn signal light - inner X of LEDs flashes white Backup light - center LEDs light up Warning light - inner X of LEDs flashes amber 4 Flash patterns can be synchronized when multiple lights are connected Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red, white, and amber LEDs Red lens with red LEDs for tail light Clear lens with white LEDs for backup light Recessed mount with built-in black grommet - hardware not included Hardwired and ready to install DOT compliant Meets FMVSS 108 requirements for automotive lighting Specs: Wire configuration: Black: tail Red: stop/turn Brown: backup Blue: flash pattern selection Yellow: sync Green: amber warning Orange: white warning White: ground Dimensions: 4-5/16" diameter x 1" deep Wire length: 8" Diodes: 20 Voltage: 12V Lifetime warranty on LEDs
Get your trailer's everyday lighting and warning functions into one streamlined light. Stop, turn, tail, backup, and dual-color warning lights all share the same housing, with stop and turn signals taking priority when you're on the road.Highlights Tail Light and Warning Light in One: Stop, turn, tail, back-up, and dual-color warning functions share one housing. Road Signals Stay Priority: Stop and turn signals override the warning lamp to maintain constant DOT compliance.
Adding visibility in tight spaces usually means cutting larger holes or skipping warning lights. This 3/4" light fits a small grommet opening and combines marker and strobe functions so you can add both without changing your setup.This 3/4" bullet light installs into a standard grommet hole and combines marker and strobe functions in one unit. You can add warning output without changing your mounting layout or adding extra light housings. Sync Multiple Lights Across Your Setup Uncoordinated flash patterns can make warning signals harder to read.
Use this anti-rattle clamp to keep your hitch-mounted accessory from rattling and wobbling in your receiver. Great for tow bars, high-low adapters, bike racks, cargo carriers, and more. Quick, simple bolt-on installation.Features: Anti-rattle clamp keeps hitch-mounted accessories stable and quiet Helps to reduce or eliminate wobble and sway within your hitch receiver Ideal for cargo carriers, bike racks, and similar hitch-mounted accessories Effortless, bolt-on installation Place stabilizer plate over the top collar of your hitch receiver, making sure the bent portion rests on the shank of your accessory Insert the U-bolt from the bottom side, positioning it at the front of the collar Tighten nuts and washers, using included wrench Strong, durable steel construction with vinyl coating Black powder coated plate resists corrosion Application: 2" x 2" receivers Hitch receiver must have a ring or collar around it for U-bolt to attach Warning/Note: Not for use with receiver tube extentions.
Small, light, and precise, this portable unit gets you smooth braking with basically no installation. Plugs directly into 12V outlet. Easy to swap between multiple cars. Control and monitor the system remotely from your motorhome with LCD display.Features: Applies towed vehicle's brakes proportionally for smooth braking Measures motorhome's braking and activates car's brakes with same intensity Lets you adjust force and sensitivity for smooth braking Swaps easily between multiple towed vehicles Requires second vehicle kit (BRK2505 - sold separately) for each alternate car Adjusts to fit almost any car Sits evenly on any floorboard with adjustable feet Clamps easily around almost any brake pedal Braces firmly against the seat with seat pad that you can raise or lower Installs simply, with no splicing or hardwiring Plugs directly into 12V outlet in towed car Removes and stores easily Lightweight and compact Convenient handle - carry with one hand Allows you to control and monitor braking with handy LCD screen mounted on RV dashboard Lets you activate towed car's brakes in emergency or to correct sway Alerts you if the towed vehicle becomes detached from your motorhome Warns you if there's too much pressure to activate the brakes properly Plugs into 12V accessory outlet Stops the car if a breakaway occurs, even if your car's battery is dead Able to activate for up to 30 minutes after loss of power Made in the USA Specs: Compatible with hybrids and other cars with continuous-power-assist brakes Overall dimensions: 8" long x 7-1/2" wide x 11-1/2" tall Weight: 6 lbs 2-Year warranty Do I Need a Braking System for Flat Towing?
Replace your old trailer door spring with this heavy-duty system. This dual-spring setup lets you easily open and close the ramp door on your enclosed trailer and eliminates the risk of it freefalling. Fits 60 to 82 wide trailer doors.Features: Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury Helps to take on the weight of your trailer door so you don't have to Dual springs eliminate the risk of the ramp door collapsing and causing damage or injury If one cable falters, the other spring will prevent the trailer door from freefalling Spring reduces wear and helps prevent damage to door hinges System can be modified to fit your specific application Slide the bracket and cable drum down and cut the shaft to a shorter length Yellow safety covers install on top of the bolt heads to prevent any unwanted adjustments Sturdy steel construction Made in the USA Specs: Application: 60" to 82" wide trailer door Dimensions: 81" wide Spring capacity: 160 lbs Cable length: 150" 1-Year limited warranty Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This dual-spring setup lets you easily open and close the ramp door on your enclosed trailer and eliminates the risk of your ramp door freefalling.Specs: Application: 94-3/8" to 95-3/8" wide trailer door Dimensions: 96" wide x 4-7/8" tall x 5-3/4" deep Spring capacity: 230 lbs Cable length: 150" Features: Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury Helps take on the weight of your trailer door so you don't have to Dual springs eliminate the risk of the ramp door collapsing and causing damage or injury If one cable falters, the other spring will prevent the trailer door from freefalling Spring reduces wear and helps prevent damage to door hinges System can be modified to fit your specific application Slide the bracket and cable drum down and cut the shaft to a shorter length Sturdy steel construction Made in the USA Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
Replace your old trailer door spring with this heavy-duty system. This dual-spring setup lets you easily open and close the ramp door on your enclosed trailer and eliminates the risk of freefalling. Fits 69" to 96" wide trailer doors.Features: Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury Helps to take on the weight of your trailer door so you don't have to Dual springs eliminate the risk of the ramp door collapsing and causing damage or injury If one cable falters, the other spring will prevent the trailer door from freefalling Spring reduces wear and helps prevent damage to door hinges System can be modified to fit your specific application Slide the bracket and cable drum down and cut the shaft to a shorter length Orange safety covers install on top of the bolt heads to prevent any unwanted adjustments Sturdy steel construction Made in the USA Specs: Application: 69" to 96" wide trailer door Dimensions: 95-5/8" wide x 4-3/4" tall Spring capacity: 160 lbs Cable length: 150" 1-Year limited warranty Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
Replace your old trailer door spring with this heavy-duty system. This dual-spring setup lets you easily open and close the ramp door on your enclosed trailer and eliminates the risk of it freefalling. Fits 60 to 82 wide trailer doors.Features: Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury Helps to take on the weight of your trailer door so you don't have to Dual springs eliminate the risk of the ramp door collapsing and causing damage or injury If one cable falters, the other spring will prevent the trailer door from freefalling Spring reduces wear and helps prevent damage to door hinges System can be modified to fit your specific application Slide the bracket and cable drum down and cut the shaft to a shorter length Yellow safety covers install on top of the bolt heads to prevent any unwanted adjustments Sturdy steel construction Made in the USA Specs: Application: 60" to 82" wide trailer door Dimensions: 81" wide Spring capacity: 120 lbs Cable length: 150" 1-Year limited warranty Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
Replace your old trailer door spring with this heavy-duty system. This dual-spring setup lets you easily open and close the ramp door on your enclosed trailer and eliminates the risk of freefalling. Fits 60" to 96" wide trailer doors.Features: Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury Helps to take on the weight of your trailer door so you don't have to Dual springs eliminate the risk of the ramp door collapsing and causing damage or injury If one cable falters, the other spring will prevent the trailer door from freefalling Spring reduces wear and helps prevent damage to door hinges System can be modified to fit your specific application Slide the bracket and cable drum down and cut the shaft to a shorter length Orange safety covers install on top of the bolt heads to prevent any unwanted adjustments Hardware for installing the brackets to your trailer is not included Sturdy steel construction Made in the USA Specs: Application: 60" to 96" wide trailer door Dimensions: 95-5/8" wide x 4-3/4" tall Spring capacity: 120 lbs Cable length: 150" 1-Year limited warranty Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
Replace your old trailer door spring with this heavy-duty system. This dual-spring setup lets you easily open and close the ramp door on your enclosed trailer and eliminates the risk of freefalling. Fits 81" to 96" wide trailer doors.Features: Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury Helps to take on the weight of your trailer door so you don't have to Dual springs eliminate the risk of the ramp door collapsing and causing damage or injury If one cable falters, the other spring will prevent the trailer door from freefalling Spring reduces wear and helps prevent damage to door hinges System can be modified to fit your specific application Slide the bracket and cable drum down and cut the shaft to a shorter length Orange safety covers install on top of the bolt heads to prevent any unwanted adjustments Sturdy steel construction Made in the USA Specs: Application: 81" to 96" wide trailer door Dimensions: 95-1/2" wide x 4-3/4" tall Spring capacity: 185 lbs Cable length: 150" 1-Year limited warranty Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
Replace your old trailer door spring with this heavy-duty system. This dual-spring setup lets you easily open and close the ramp door on your enclosed trailer and eliminates the risk of freefalling. Fits 92-1/4" to 95" wide trailer doors.Specs: Application: 92-1/4" to 95-1/4" wide trailer door Dimensions: 96" wide x 4-7/8" tall x 7-1/2" deep Spring capacity: 150 lbs Cable length: 150" Features: Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury Helps take on the weight of your trailer door so you don't have to Dual springs eliminate the risk of the ramp door collapsing and causing damage or injury If one cable falters, the other spring will prevent the trailer door from freefalling Spring reduces wear and helps prevent damage to door hinges System can be modified to fit your specific application Slide the bracket and cable drum down and cut the shaft to a shorter length Sturdy steel construction Made in the USA Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 32" to 56" wide trailer doors.Specs: Application: 32" to 56" wide trailer door Dimensions: 56" wide x 4-7/8" tall x 7-1/2" deep Spring capacity: 85 lbs Cable length: 135" Features: Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury Helps take on the weight of your trailer door so you don't have to Spring reduces wear and helps prevent damage to door hinges System can be modified to fit your specific application Slide the bracket and cable drum down and cut the shaft to a shorter length Sturdy steel construction Made in the USA Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 38" to 69" wide trailer doors.Specs: Application: 38" to 69" wide trailer door Dimensions: 69" wide x 4-7/8" tall x 7-1/2" deep Spring capacity: 120 lbs Cable length: 150" Features: Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury Helps take on the weight of your trailer door so you don't have to Spring reduces wear and helps prevent damage to door hinges System can be modified to fit your specific application Slide the bracket and cable drum down and cut the shaft to a shorter length Sturdy steel construction Made in the USA Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 43" to 79" wide trailer doors.Features: Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury Helps take on the weight of your trailer door so you don't have to Spring reduces wear and helps prevent damage to door hinges System can be modified to fit your specific application Slide the bracket and cable drum down and cut the shaft to a shorter length Sturdy steel construction Made in the USA Specs: Application: 43" to 79" wide trailer door Dimensions: 79" wide x 4-7/8" tall x 7-1/2" deep Spring capacity: 150 lbs Cable length: 150" Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 40" to 67" wide trailer doors.Features: Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury Helps take on the weight of your trailer door so you don't have to Spring reduces wear and helps prevent damage to door hinges System can be modified to fit your specific application Slide the bracket and cable drum down and cut the shaft to a shorter length Orange safety covers install on top of the bolt heads to prevent any unwanted adjustments Sturdy steel construction Made in the USA Specs: Application: 40" to 67" wide trailer door Dimensions: 67-5/8" wide x 4-3/4" tall Spring capacity: 80 lbs Cable length: 150" 1-Year limited warranty Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 40" to 79" wide trailer doors.Features: Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury Helps take on the weight of your trailer door so you don't have to Spring reduces wear and helps prevent damage to door hinges System can be modified to fit your specific application Slide the bracket and cable drum down and cut the shaft to a shorter length Orange safety covers install on top of the bolt heads to prevent any unwanted adjustments Sturdy steel construction Made in the USA Specs: Application: 40" to 79" wide trailer door Dimensions: 79" wide x 4-3/4" tall Spring capacity: 80 lbs Cable length: 150" 1-Year limited warranty Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 38" to 79" wide trailer doors.Specs: Application: 38" to 79" wide trailer door Dimensions: 79" wide x 4-7/8" tall x 7-1/2" deep Spring capacity: 120 lbs Cable length: 150" Features: Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury Helps take on the weight of your trailer door so you don't have to Spring reduces wear and helps prevent damage to door hinges System can be modified to fit your specific application Slide the bracket and cable drum down and cut the shaft to a shorter length Sturdy steel construction Made in the USA Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
Replace your old trailer door spring with this heavy-duty, conventional ramp door spring. This single-spring setup lets you easily open and close the ramp door on your enclosed trailer. Fits 45-1/4" to 95-5/8" wide trailer doors.Specs: Application: 45-1/4" to 95-5/8" wide trailer door Dimensions: 96" wide x 4-7/8" tall x 7-1/2" deep Spring capacity: 150 lbs Cable length: 150" Features: Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury Helps take on the weight of your trailer door so you don't have to Spring reduces wear and helps prevent damage to door hinges System can be modified to fit your specific application Slide the bracket and cable drum down and cut the shaft to a shorter length Sturdy steel construction Made in the USA Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
Replace your old trailer door spring with this heavy-duty system. This dual-spring setup lets you easily open and close the ramp door on your enclosed trailer and eliminates the risk of it freefalling. Fits 76" to 96" wide trailer doors.Features: Ramp door spring lets you easily lift and lower the door on your enclosed trailer without risk of injury Helps to take on the weight of your trailer door so you don't have to Dual springs eliminate the risk of the ramp door collapsing and causing damage or injury If one cable falters, the other spring will prevent the trailer door from freefalling Spring reduces wear and helps prevent damage to door hinges System can be modified to fit your specific application Slide the bracket and cable drum down and cut the shaft to a shorter length Sturdy steel construction Made in the USA Specs: Application: 76" to 96" wide trailer door Dimensions: 96" wide x 4-3/4" tall Spring capacity: 250 lbs 1-Year limited warranty Cable length: 150" Warning: It is recommended that only individuals who have experience winding torsion springs install this product. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.
On the job or on the road, this 6-inch grommet light handles warnings and signals in one slim package. IP68 sealed, sonically welded, and plug-and-play with an AMP plug, it keeps you compliant and visible in any weather.
Filters
