This roof vent uses a 12-volt fan to circulate air in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Rounded, plastic vent cover opens and closes with the simple spin of a handle.
Replaces a broken plastic dome assembly on your Ventline Vanair roof vent for motor homes and enclosed trailers. The dome assembly seals the vent when it is closed.Features: Replaces dome assembly Works with Ventline Vanair roof vent model VP-543 Smoke color Measures 8-1/2" overall Measures 1-3/4" high Made in the USA
... Fits Ventline P, S0721, B, and T Series range hoods and Ventadome or Vanair roof vents.Features: Replaces 12V DC fan motor for your RV range hood or roof vent Fits: Ventline P, S0721, B, and T Series range hoods Ventadome or Vanair roof vents Includes wiring and mounting hardware Specs: Motor length: 1-1/2" Motor output: 1.2 amps at 13.6 volts DC This fan motor can replace older, obsolete motors.
Replaces a lost or damaged fan blade on the 12-volt fan in your Ventline Vanair RV roof vent for motor homes and enclosed trailers.Features: Replaces a fan blade on Ventline Vanair RV roof vent for motor homes and enclosed trailers Works with Ventline Vanair roof vent model VP-543 or VP542 Made in the USA This fan blade won't fit older, obsolete motors.
Replaces a lost or broken handle on your Ventline Vanair RV roof vent for motor homes and enclosed trailers. The handle opens and closes the dome on this vent. Includes mounting screws.Features: Replaces the vent operating handle Works with Ventline Vanair roof vent model VP-543 Polar White color Includes 1 handle with 2 screws Made in the USA
... Fits Ventline P, S0721, B, and T Series range hoods and Ventadome or Vanair roof vents.Features: Replaces 12V DC fan motor for your RV range hood or roof vent Fits: Ventline P, S0721, B, and T Series range hoods Ventadome or Vanair roof vents Certified by an independent laboratory to meet CSA standards for use in Canada Includes wiring and mounting hardware Specs: Motor length: 1-1/2" Motor output: 1.2 amps at 13.6 volts DC If you are replacing an older motor, then you'll have to order a new, compatible fan blade (sold separately) along with the replacement motor.
Put the pin back in and wind it 12-16 times rolling it towards the camper to put the correct tension in the slide topper #LCV000163285 before installing it. This will give you the correct amount of tension for extending and retracting the awning.
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…
Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…
Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…
That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…
Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…
Hey Robert congrats on the new truck! In bed hitch includes the puck system as well when it comes to fitment of the air bag kit brackets. For your 2026 Ram 3500 with the factory puck system, I recommend the Air Lift LoadLifter 7500 XL Air Helper…
When the SumoSprings Solo Custom Helper Springs item #SS65FR are installed on your 2020 GMC Sierra 1500 you will have a 1/2" - 1" of clearance with no additional cargo weight. This allows for you to have a comfortable ride when you are…
Replaces a damaged screen (screen and frame are 1 piece) on your Ventline Vanair RV roof vent for motor homes and enclosed trailers. Screen keeps debris and insects out of your trailer or motor home when the dome is open.Features: Replaces screen and frame (1 piece) Works with Ventline Vanair roof vent model VP-543 Polar White color Made in the USA Specs: Overall diameter: 6" Distance between mounting holes (center to center): 4-1/4"
Replaces a lost or damaged ceiling garnish on your Ventline Vanair RV roof vent for motor homes and enclosed trailers. This trim piece provides the finishing touch to the appearance of your Vanair roof vent.Features: Replaces garnish (inside trim piece) Works with Ventline Vanair roof vent model VP-543 Polar White color Made in the USA
Replaces a broken push-button switch on your Ventline Vanair RV roof vent or Ventadome for motor homes and enclosed trailers. This switch controls the fan motor.Features: Replaces a broken push-button switch for 12V fan motor Works with Ventline Vanair roof vent model VP-543 Also works with Ventline Roof Ventadomes Replaces BV0199-04
Filters
