Corrosion-resistant clips help you secure loose wires on your trailer. Use them to supplement the clips in a wiring kit or to replace old worn-out clips. Fits around edges up to 5/32" thick.Features: Clips secure wiring to your trailer's frame Helps prevent unsafe conditions caused by loose, drooping, or stray wiring Creates an overall neater appearance by keeping wires in place Fast, easy installation - just pop onto the edge of your trailer frame Zinc-plated steel is corrosion resistant Specs: Quantity: 10 clips Fits around edges up to 5/32" thick Width: 3/8"
Stay visible when towing your boat trailer at night with this submersible, 1" diameter LED light. This red light can function as a rear side marker or clearance light. ... Rather than buying side marker and clearance lights separately, you can mount this single, PC-rated light at a 45-degree angle on the rear corner of your trailer to act as both.
This kit provides a 7-pole, RV-style trailer connector, wiring harness and mounting bracket for adding an aftermarket socket. Wiring harness includes a 4', color-coded, 7-wire lead.Features: Replacement 7-pole, sealed socket, RV-style trailer connector with pigtail and mounting bracket High-impact nylon construction Resists corrosion 4' Long wiring harness Hard-wires into vehicle wiring system Has 1/2" convoluted tubing Forms weathertight seal on back of socket Keeps out moisture Prevents corrosion Includes color-coded, 7-wire leads that meet RVI standards Right-angle mounting bracket Convenient mount under rear bumper of truck or SUV Zinc-plated construction Black, epoxy coating Protects against rust and corrosion Spring-loaded lid with stainless steel spring and runner gasket Prevents leaks when closed Has drain slot and angled design for drainage Includes wiring diagram for quick installation Copper-plated terminal pins High conductivity and low resistance Sealed with silicone at the back of the socket Prevents moisture from contacting mating connector Specs: Current rating: 30 amps Volt rating: 12 volts Wiring configuration: Color - circuit - recommended wire gauge: Red - Left Turn and Stop - 14 gauge White - Ground - 10 gauge Blue - Electric Brakes - 12 gauge Green - Right Turn and Stop - 14 gauge Black - Battery - 12 gauge Brown - Running Lamps - 14 gauge Yellow - Backup Lamps - 14 gauge 1-Year limited warranty
Ensure your trailer is clearly visible and meets safety regulations with this amber side marker light. It fits a 3/4" grommet and features a 9" wire tail for easy, low-profile installation.Features: Amber LED side marker light enhances visibility and safety on trailers and utility vehicles Compact design fits standard 3/4" grommet mount openings Half the depth of standard 3/4" lights, ideal for tight-space mounting Sealed polycarbonate lens protects against impact and UV exposure IP68-rated construction delivers dust and water resistance TecSeal urethane potting safeguards internal circuitry Rated for over 100,000 hours of reliable LED life Meets PC/P2 output requirements under FMVSS 108 Specs: Mounting style: 3/4" grommet Wire lead: 9" pigtail Lens color: Amber Operating voltage: 9-14 V DC Current draw: 0.06-0.09 A Dimensions: 1" diameter x 5/8" depth Certifications: IP68, FMVSS 108 compliant Sealed, Waterproof Trailer Light Maintaining a functioning lighting system for your boat trailer is required by law.
Ensure your trailer is visible and compliant with this red side marker light. It fits into a 3/4" grommet and includes a 9" wire for easy, low-profile installation.Features: Red LED side marker light provides reliable visibility for trailers and utility vehicles Compact design fits standard 3/4" grommet mount openings Half the depth of standard 3/4" lightsgreat for tight-space installations Sealed polycarbonate lens resists impact and UV damage IP68-rated construction blocks out water and dust TecSeal urethane potting protects internal circuitry Rated for over 100,000 hours of LED life Meets PC/P2 output requirements under FMVSS 108 Specs: Mounting style: 3/4" grommet Wire lead: 9" pigtail Lens color: Red Operating voltage: 9-14 V DC Current draw: 0.06-0.09 A Dimensions: 1" diameter x 5/8" depth Certifications: IP68, FMVSS 108 compliant Sealed, Waterproof Trailer Light Maintaining a functioning lighting system for your boat trailer is required by law.
PC rated. 1" Diameter, waterproof mini LED amber light functions as a side marker and clearance light when properly mounted. Recessed-mount installation with included grommet. 2-Wire design. 18" Long pigtail.Features: Small, round LED light serves as a side marker and clearance light for your trailer Sealed, waterproof housing and lens unit Military-grade construction of circuit board Urethane potting offers better protection than common epoxy potting Premium LED is energy efficient, long-lasting, and vibration resistant Rated for up to 100,000 hours of operation Durable UV-resistant lens Clear lens over amber LED Compatible with 12V DC system Recessed-mount installation with included grommet Requires a 3/4" diameter cutout Add on stainless steel trim ring (sold separately) for a finished look 2-Wire harness hardwires to your application Includes white ground wire Meets or exceeds FMVSS 108 standards PC-rated light produces a 180-degree beam Assembled in the USA Specs: Dimensions: 1" diameter x 7/8" thick Diodes: 1 Input voltage: 9V - 14V Power draw: 0.03 - 0.06 amps Wire length: 18" IP rated: 68 Limited lifetime warranty Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
Quickly and easily install a 7-way and a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.Features: Provides both a 7-way RV-style and a 4-pole flat trailer connector at the back of your vehicle to power your trailer's signal lights Designed for use with a factory tow package Compatible with 5-pole and 6-pole adapters (sold separately) Connects quickly and easily - no cutting or splicing of wires Locate connection point behind rear bumper Plug in connector Includes mounting bracket and hardware Comes with protective covers for connectors Assembled in the USA Limited 1-year warranty Installation This custom-fit connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper, on the driver's side.
Trailer kit with 2 stud-mount, submersible tail lights; corrosion-resistant license-plate bracket; 2 amber side marker and clearance lights; 25' wiring harness with 4-pole connector; mounting hardwareFeatures: Red, submersible, trailer light kit with stud mount lights, license bracket, amber clearance lights, wiring harness, mounting hardware 2 Red, stud-mount, submersible tail lights (ST6RB and ST7RB) Driver's-side light includes license illuminator Corrosion-resistant license-plate bracket 2 Amber, stud mount, square side marker and clearance lights (MC36AB) Self-grounding through mounting stud Lights include reflectorized lenses, eliminating the need for separate reflectors to meet DOT requirements 25' Wiring harness with 4-pole connector Mounting hardware included DOT approved Limited 3-year warranty - excludes bulbs Note: Lights included in this kit pull 2.5 amps for stop/turn function and 1 amp for tail signal.
Trailer kit with 2 stud mount tail lights; 2 stud mount amber clearance lights; license plate bracket; wire harness w/4-pole connectorStandard Trailer Light Kit with 25' Wire Harness This is a stud-mountedtrailer light kit. The kit contains two stud-mount tail lights, two stud-mount, amber clearance marker lights, a corrosion-proof license plate bracket, and a 25' wire harness with a 4-pole trailer connector.
... Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.Features: Rectangular combination tail lights are designed to serve 7 functions on trailers over 80" wide when properly mounted Stop, tail, turn, side marker, side reflex, rear clearance, and rear reflex Built-in license plate light on driver's-side light illuminates license plate Sealed, waterproof construction is submersible Designed for marine trailer applications Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red acrylic lens screws on and can be easily replaced Molded plastic housing Mounts on surface of trailer - stainless steel hardware included Includes license plate bracket for mounting driver's side light 3-Wire pigtail 25-Ft Wiring harness for making connections DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting P2PC rated Specs: Configuration: driver side (STL17RB) Passenger side (STL16RB) Dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep Diodes: 40 Driver's-side light: 22 diodes Passenger's-side light: 18 diodes Power draw at 12.8 volts: Stop/turn signal light: 0.259 amps Tail light: 0.062 amps Lifetime warranty on LEDs Sealed, Waterproof Trailer Light The waterproof construction of these lights make them ideal for use on trailers that may be submerged, like a boat trailer.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate. Curt builds each tail light converter using surface-mount technology (SMT).
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs into OEM tow package wiring harness. Powered converter reduces strain on wiring system. ... This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate. Curt builds each tail light converter using surface-mount technology (SMT).
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate. Curt builds each tail light converter using surface-mount technology (SMT).
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required. ... Tail Light Converter with Surface-Mount Technology A tail light converter is built into this T-connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required. ... Tail Light Converter with Surface-Mount Technology A tail light converter is built into this T-connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Powered Tail Light Converter with Surface-Mount Technology A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate. Curt builds each tail light converter using surface-mount technology (SMT).
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate. Curt builds each tail light converter using surface-mount technology (SMT).
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate. Curt builds each tail light converter using surface-mount technology (SMT).
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required. ... Tail Light Converter with Surface-Mount Technology A tail light converter is built into this T-connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required. ... Tail Light Converter with Surface-Mount Technology A tail light converter is built into this T-connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate. Curt builds each tail light converter using surface-mount technology (SMT).
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate. Curt builds each tail light converter using surface-mount technology (SMT).
Filters
