Weld-on jack has a retracted height of 25-1/8" and an extended height of 40-1/4". Square design provides superior side-load support. Offers 15-1/8" of screw travel and 13-3/4" of drop leg travel. Includes a sidewind handle.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels.
Keep your RV's interior off-limits with a new entry door lock. It replaces your original Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door lock. The lock can be keyed alike to match other Global Link locks.
This hitch-mounted cargo carrier tilts away from your vehicle - with gear loaded - for easy cargo area access, and it folds up for storage when not in use. The spacious basket has side rails that help contain your cargo and provide tie-down points.
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. Accepts included standard 3-prong plugs.
The automotive-grade pads on these brakes offer lasting effectivenes. 12" x 2" Assemblies have rust-resistant, e-coated backing plates. Fits 14-1/2" to 16-1/2" wheels.
The automotive-grade pads on these brakes offer lasting effectiveness. Both 10" x 2-1/4" assemblies have rust-resistant, e-coated backing plates. Fits 14" to 15" wheels.
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". Surface mount - hardware included. 3-Wire pigtail.
Install this hub-and-drum assembly on your trailer. Fits 5,200-lb to 7,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
The monitor of this camera system displays 4 angles so that you can safely back into a tight space at the campground. Motion sensors automatically power the monitor on so you can keep an eye on any animals or trespassers prowling outside your RV.
Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12-1/4" x 3-3/8" Assemblies have rust-resistant, e-coated backing plates and protective dust shields. Fits 15" or larger wheels.
Want brake adjustments that go like clockwork? These brakes automatically adjust as you tow so you don't have to crawl around on the ground to do it manually. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. Made in the USA.
You may not tow a lot, but if you hit a crosswind, your trailer will sway. Get some control back with this low-cost solution. The telescoping sway bar lets you set just the right amount of resistance. Head unit comes with a pre-torqued hitch ball.
Cast ball coupler is made of sturdy steel and has a durable black powder coat finish. Composite eZ-Latch ensures fast, easy, secure hookup and disconnect. Adjustable channel bracket and mounting hardware sold separately.
The V-bar studs on each cross chain of these heavy-duty, twist-link snow chains bite into frozen roads to give you excellent traction in deep snow and ice. Also ideal for off-roading in boggy areas. Chains mount easily and tension with cams.
This hitch bike rack makes it easy to take 2 e-bikes to the trail. Ratcheting hooks hold your bikes securely by the frame and lock to deter theft. Wheel hoops adjust for different wheelbases. Anti-rattle system reduces wobble and sway.
Replace your standard equalizers with these shock-absorbing E-Z Flex units to get a smooth ride for your tandem-axle trailer. Equalizers with rubber cores absorb road shock for a smooth ride. Heavy-duty shackle straps ensure strength.
This roof vent allows air to circulate in motor homes and enclosed trailers, keeping interiors ventilated without compromising security. Wedge-shaped, white plastic vent cover opens and closes from inside with a hand-operated crank.
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. Single wire design. P2 rated.
Designed for adventurers who spend their weekends on the road or camping in the woods, the Curt cargo carrier has 4 welded support bars that add rigidity to the mesh floor and keep it from warping over time, due to regular use.
Bronze bushings are designed for use with trailer suspension systems. Insert into the eye of a leaf spring or equalizer to ensure proper sizing for suspension bolts.
7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.
Of all the hitches we tested, this is our favorite. It fixes sway, creates superb handling, and levels your ride - silently. Rotating chain-style, clamp-on brackets make setup easy. Max 2" drop, 8" rise. Made in the USA, too!
Filters
