Connect the turret portion (sold separately) of the sidewinder to this arm assembly to create a complete 5th Airborne sidewinder, which will enable you to easily make up to 90-degree turns ... C-Channel design of sidewinder provides more stability and strength than standard pinbox Able to support heavier loads Specs: Capacity: 16,000 lbs Clearance: see formula below to ensure proper clearance
Use this sturdy king pin lock to deter towaway trailer theft. Lock fits over your fifth-wheel trailer's king pin. Resists picking and drilling. Works with PullRite and Sidewinderpinboxes. vehicle Great for PullRite and Sidewinderpinboxes Push-and-lock cylinder locks without the need for a key Rotating-disc-tumbler lock provides maximum security Nearly a million possible key codes Resistant
Make tight 90-degree turns with your short-bed pickup while towing your fifth-wheel trailer using this extended pinbox. The pivoting action lets your trailer turn and clear the cab so you don't ... , then C = 51" 102/2 = 51 Therefore, (36 + 22) - 51 = 7" of clearance The Sidewinder Design The pivot point sits 22" behind the king pin. The rotating turret attaches to the pinbox on your
Install your fifth-wheel trailer hitch in your truck bed with this kit. Custom brackets reduce the amount of time required to install the hitch. Brackets, base rails, and hardware included.
Make tight 90-degree turns with your short-bed pickup while towing your fifth-wheel trailer using this extended pinbox. The pivoting action lets your trailer turn and clear the cab so you don't ... 22) - 51 = 7" of clearance The Sidewinder Design The pivot point sits 22" behind the king pin. The rotating turret attaches to the pinbox on your trailer to provide the new pivot point
You are on the right track with your thinking and doing exactly what I would do if I were you. You can swap out the slider base of your Companion for GM rail kit to the fixed base part #BWRVB3710 and in the rearmost head position you'd have…
Most sidewinders are about 12 inches wide and you also have the wedge to immobilize the connection at the hitch, so I recommend the Reese Lube Plate for Reese 5th Wheel Trailer Hitches - 10" Diameter #RP83002 if you are simply wanting a…
For their Companion series of 5th wheel hitches, B&W recommends using a 10 inch lube plate. I'd recommend the #16721 from Curt. The lube plate would protect the skid on your hitch from getting scratched up, and would eliminate the…
The recommendation for the 10" diameter lube plate on a B&W Companion 5th Wheel Trailer has come from the manufacturer of the fifth wheel hitch, B&W. The Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 will work…
The best sliding fifth wheel hitch for a 2018 Ford F-150 with 5.5' bed is the Demco Hijacker Autoslide 5th Wheel Trailer Hitch part #DM8550040 with the Demco Hijacker Premier Series Above-Bed Base Rails and Custom Installation Kit part…
The Reese Revolution pin box will not work with the B&W companion that uses the gooseneck underbed hitch for the base. It puts too much force on the under body for that combination. If you want to use an underbody rail kit, I recommend the…
You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…
For your customers 2021 GMC Sierra 1500 with a 5-3/4' bed you'll need to install the B&W 5th Wheel Rails #BWRVK2504. These are custom designed for their truck minimizing how many holes you'll need to drill. Keep in mind with a super…
The B&W Patriot 5th Wheel Trailer Hitch #BWRVK3255 works great with a rotating pin box. B&W makes some of the best hitches in the towing business and I highly recommend them. The Patriot has a 18,000 lbs capacity and its dual jaws provide 360…
The Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 would be a great replacement for your Husky 16K Easy Roll Hitch. They have identical capacities and both mount on industry standard rails. Since you are using a Reese…
Yes, the #SWW-03 wedge is the correct wedge to use with your Reese Revolution pin box and your Reese 16k 5th wheel hitch. I confirmed this with a representative at Reese and they also suggested some maintenance tips that you can do to keep your hitch…
The 'universal' wedge included with the Reese Sidewinder works fairly well with the Reese M5 #RP30918 5th wheel hitch, but our customers tell us that the #RP44FR which is specifically designed for the M5 hitch would fit and work the best.
Hitch slides automatically as you drive to give you 22-1/2" of additional clearance for tight turns. A wraparound jaw provides a smooth ride and a locking bar offers added security. Pivoting head allows easy hook up and helps to limit chucking. to back Hitch height settings: 15-1/4", 16-1/2", and 18" 5-Year limited warranty Note: This fifth-wheel trailer hitch is not compatible with Sidewinder or Revolution king pins. Do not use any
Tow your fifth-wheel trailer with your gooseneck hitch and get the smooth, stable ride that only an air-ride-equipped coupler can deliver. This trailer coupler adapter has a built-in air bag that provides cushion and absorbs road shock.Features: Air ride coupler lets you tow your 5th-wheel trailer with your gooseneck hitch Goose Box replaces standard pinbox on 5th-wheel trailer Endorsed by Lippert Components Inc. - will not affect
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.
Quickly and easily convert your B&W Turnoverball gooseneck hitch to a sturdy 5th-wheel trailer hitch. Wide-stance base offers fore/aft and height adjustments to fit your application. Dual-jaw hitch removes without a trace for full bed access.: 20,000 lbs Vertical load limit: 5,000 lbs Hitch height: 16-1/4" - 18-1/4" Limited lifetime warranty Note: This fifth-wheel trailer hitch is not compatible with Sidewinder or Revolution king pins
This hitch slides automatically as you drive to give you 14" of additional clearance for tight turns. A wraparound jaw provides a smooth ride and a locking bar offers added security. Pivoting head allows easy hook up and helps to limit chucking. trailer hitch is not compatible with Sidewinder or Revolution king pins. Do not use any device that changes the pivot point of your trailer's king pin with this hitch. Automatic Slider Makes Cornering
Mount this 7-way, RV-style connector in your truck bed to simplify hookup of your 5th-wheel or gooseneck trailer. Harness plugs into existing wiring and retains use of factory 7-pole at the bumper. 90-Degree-angled connector fits into tight spaces.
This hitch slides automatically when you turn to give you 14" of clearance for tight turns. A wraparound jaw provides a smooth ride and a locking bar offers added security. Base secures in underbed mounts and removes for full bed access., controlled, automatic motion Rotating hitch head turns up to 90 degrees with your trailer Rotation creates the force that propels the automatic slider Built-in brackets stabilize your pinbox so the king pin
Kit is required for use with Sidewinder rotating turret RP61300 if the pinbox on your trailer measures 12-1/2". Pinboxes that meet this criteria include Fabex 500, 503, 520, 530, 560 and 765 ... Features: Works with rotating turret (RP61300 - sold separately) for 5th Airborne and Sidewinderpinbox couplers Spacers mount on either side of turret to increase its width so that it can be used
Quickly and easily convert your B&W Turnoverball gooseneck hitch to a sturdy 5th-wheel trailer hitch. Built-in slider helps eliminate clearance concerns during slow-speed turns. Dual-jaw hitch removes without a trace for full bed access. is not compatible with Sidewinder or Revolution king pins. Do not use any device that changes the pivot point of your trailer's king pin with this hitch. Fifth-Wheel Towing with Your Gooseneck Hitch
Keep your RV's interior off-limits with a new entry door lock. It replaces your original Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door lock. The lock can be keyed alike to match other Global Link locks. and enter number of locks in Quantity box Specs: Dimensions: 3.47" wide x 4.28" tall Fits doors that are 1-1/4" to 1-1/2" thick Installs into latch cutouts that are 2-1/2" wide x
This hitch slides automatically when you turn to give you 14" of clearance for tight turns. A wraparound jaw provides a smooth ride and a locking bar offers added security. Base secures in underbed mounts and removes for full bed access.: 14" front to back Hitch height settings: 18" and 19-1/2" 5-Year limited warranty Note: This fifth-wheel trailer hitch is not compatible with Sidewinder or Revolution king pins. Do not use any
Bolt this wedge onto your Sidewinder or Revolution pinbox to prevent the king pin from rotating in your Curt A Series fifth-wheel trailer hitch.Features: Prevents Sidewinder or Revolution king pin from pivoting in your hitch Works with Curt A Series 5th-wheel trailer hitches Bolts onto Sidewinder or Revolution in place of universal wedge
This hitch slides automatically when you turn to give you 14" of clearance for tight turns. A wraparound jaw provides a smooth ride and a locking bar offers added security. Base secures in underbed mounts and removes for full bed access. is not compatible with Sidewinder or Revolution king pins. Do not use any device that changes the pivot point of your trailer's king pin with this hitch. Automatic Slider Makes Cornering Easy Most often used
Specially designed to attach to the receivers in your factory 5th-wheel towing prep package, the slider base on this hitch helps eliminate clearance concerns during slow-speed turns. Dual-jaw hitch removes without a trace for full bed access. required for your short-bed pickup to turn safely at slow speeds Rail-free design allows for full access to truck bed when hitch is removed 1" Thick dual jaws provide 360-degree jaw-to-king-pin contact
This hitch slides automatically when you turn to give you 14" of clearance for tight turns. A wraparound jaw provides a smooth ride and a locking bar offers added security. Base secures in underbed mounts and removes for full bed access. to back Hitch height settings: 16-7/8", 18-3/8", and 19-3/8" 5-Year limited warranty Note: This fifth-wheel trailer hitch is not compatible with Sidewinder or Revolution king pins. Do not use
8-5/8" x 3-1/4". LED trailer light with ABS mounting bracket illuminates your license plate. Durable polycarbonate lens and housing. Surface mount to trailer with bracket. 2-Wire design.
This hitch slides automatically when you turn to give you 14" of clearance for tight turns. A wraparound jaw provides a smooth ride and a locking bar offers added security. Base secures in underbed mounts and removes for full bed access. hitch is not compatible with Sidewinder or Revolution king pins. Do not use any device that changes the pivot point of your trailer's king pin with this hitch. Automatic Slider Makes Cornering Easy
Filter Results
