When you're done cranking a manual jack or your trailer needs hydraulic lift added to the setup, this bolt-on kit gets you there. It mounts to the frame, ties into your pump, and comes with the hoses and fittings you need.Works With External Pumps: Designed to connect to the pump you already use for other trailer functions. 7,000-lb Capacity for Work Trailers: Built for A-frame equipment, utility, and lighter commercial trailers that lift often. Durable Round-Tube Construction: Round-tube design handles repeated lifting and steady use over time. Easy Bolt-On Install: Mounts to the frame without welding, giving you hydraulic lift without a full fabrication job.
Black powder coated A-frame jack has a retracted height of 8-3/8" and an extended height of 24". The external gearbox is easily accessible, and the zinc-finished sidewind handle arm provides a sleek look.
Black powder coated A-frame jack has a retracted height of 10" and an extended height of 25". The black claw handle with a zinc-finished arm provides a sleek look and can be folded away for storage.
Black powder coated A-frame jack has a retracted height of 5-1/8" and an extended height of 12-3/4". The zinc-finished topwind handle arm has a bolt-head fastener to keep it secure during operation.
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 15-1/4". Extended height is 30-1/8". Weld-on pipe mount included.
Black powder coated A-frame jack has a retracted height of 10-3/8" and an extended height of 24-1/2". The zinc-finished topwind handle arm has a bolt-head fastener to keep it secure during operation.
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 10-1/4". Extended height is 20-7/8". Weld-on pipe mount included.
Black powder coated A-frame jack has a retracted height of 9-1/4" and an extended height of 24-1/4". The zinc-finished sidewind handle arm and internal gearbox make it as sleek as it is useful.
Round jack has a retracted height of 15-1/2" and an extended height of 30". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use.
Rust-resistant jack has a retracted height of 11" and an extended height of 21-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin lets you swivel the jack up for travel and down for use.
This corrosion-resistant, zinc-plated, A-frame jack has a retracted height of 10" and an extended height of 24-7/8". The claw handle provides a sleek look and can be folded away for storage.
This corrosion-resistant, zinc-plated, A-frame jack has a retracted height of 8-1/4" and an extended height of 22-1/2". The topwind handle has a bolt-head fastener to keep it secure during operation.
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 10-1/4". Extended height is 20-1/4". Weld-on pipe mount included.
Swivel jack pivots up for travel and down for use. Rust-resistant zinc finish makes it great for marine use. Built-in grease zerk allows for simple greasing. Retracted height is 11". Extended height is 21-3/4". Weld-on pipe mount included.
Round jack has a retracted height of 10" and an extended height of 20-1/2". The deep-seated retaining ring provides extra side-load support, and the spring-loaded pull pin allows you to swivel the jack up for travel and down for use.
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 15-5/8". Extended height is 31-1/8". Weld-on pipe mount included.
This swivel jack pivots up for travel and down for use. Built-in grease zerk allows for simple greasing. Retracted height is 11". Extended height is 21-3/4". Weld-on pipe mount included.
Black powder coated A-frame jack has a retracted height of 9-1/4" and an extended height of 24". The zinc-finished topwind handle arm has a bolt-head fastener to keep it secure during operation.
This swivel jack pivots up for travel and down for use. Rust-resistant zinc finish makes it great for marine use. Built-in grease zerk allows for simple greasing. Retracted height is 16". Extended height is 31". Weld-on pipe mount included.
These strong, galvanized steel crossbars supply the backbone for this Yakima roof rack. The rack works with accessories that clamp around the bars. Vinyl coating helps resist corrosion. Installs on your vehicle's naked roof.Features: Complete roof rack system includes 2 RoundBars, 4 BaseLine towers, 4 adapters, and a custom fit kit for your vehicle Round crossbars work with accessories and carriers that clamp around the bars Black vinyl coating protects the bars from corrosion Custom installation on your vehicle's naked roof Yakima Same Key System (SKS) lock cores (sold separately) deter theft of the rack Specs: Crossbar dimensions: 48" long x 1-1/8" diameter Weight capacity: 165 lbs Always observe your vehicle's maximum roof load capacity Color: black Construction: steel Limited lifetime warranty
This swivel jack pivots up for travel and down for use. Rust-resistant zinc finish makes it great for marine use. Built-in grease zerk allows for simple greasing. Retracted height is 16". Extended height is 31". Weld-on pipe mount included.
Black powder coated A-frame jack has a retracted height of 8-1/4" and an extended height of 22-1/2". The zinc-finished topwind handle arm has a bolt-head fastener to keep it secure during operation.
Filters
