This 7- and 4-pole trailer connector eliminates the need for an adapter and allows you to tow a trailer with either a 7- or 4-pole plug. Socket connects to your vehicle's OEM wiring system and mounts with included bracket. design Includes mounting bracket for easy, snap-in socket installation Black, epoxy-coated steel construction Mounts to bumper with included screws Specs: Application: Replaces factory 7-way connector on
The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing. controller when you don't need it Replacement wiring harness (sold separately) and replacement bracket (TK5906 - sold separately) required to swap controller between vehicles Specs: Application: trailers
Contains everything needed to repack one hub on your Lippert, Dexter, or AL-KO 3,500-lb axle. (L44610) 1 Grease seal (10-19) 1 Cotter pin 1 Tang washer for EZ-Lube spindles Outer Bearing Outer Race Inner Bearing Inner Race Seal Seal I.D. Seal O.D. L44649 L44610 L68149 L68111 10-19 1.719"
Towing? There's an app for that. This brake controller connects to your phone with Bluetooth so all your settings are right in your hand. The unit plugs into your 7-way for a one-step installation with no wiring. and temperatue Quick Tip: The Bluetooth PIN for initially pairing to your smart device is located in the quick reference guide! Note: If Bluetooth connection is lost, the brake controller will continue
We've been there - the rattles, the clanks, the frustrating swaps - so we built a smarter solution. This anti-rattle collar installs fast, stays secure, and works with all your hitch-mounted gear, so you can focus on the road ahead.
Small, light, and precise, this portable unit gets you smooth braking with basically no installation. Plugs directly into 12V outlet. Easy to swap between multiple cars. Control and monitor the system remotely from your motorhome with LCD display. breakaway switch will immediately activate the brakes and bring your vehicle to a stop. This switch mounts to the front of your toad and plugs directly into the unit. It includes a pin that connects to your
Portable System
Built-In Battery
Brake Systems
Proportional System
Air Brakes
Air Over Hydraulic Brakes
Hydraulic Brakes
Blue Ox
Every-Trip Setup
Wireless Display
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
New Arrivals — From Our Shop to You!
Chosen by folks who live and breathe this, just like you.
This heavy-duty tow bar is easy to maneuver, with a swivel head joint that lets the arms twist left and right. Non-binding levers let you disconnect at the campsite, even on rough terrain. Extra-long arms help you make tight turns. of hitch pin hole to center of base plate pin hole when lined up with arm straight): Extended: 52" Retracted: 42-1/4" Weight capacity: 10,000 lbs Safety cable length: 7' Rated at 10,000
If your vehicle already has a 4-way flat, this kit includes everything you need to install an electric trailer brake controller and 7-way connector. If there's not an existing 4-way flat on your vehicle, you can purchase one separately.
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.
This is one of our favorite brake controllers, with flawless braking and a tiny dash knob that looks like it came straight from the factory. It's so easy to adjust your settings or activate manual override.
Use your Rhino-Rack Heavy-Duty accessories on your vehicle with Thule or Yakima roof-rack tracks. Locking, Quick Mount legs mount in rack tracks. Heavy-Duty square, aluminum crossbars slide along ... Features: Adjustable roof-rack lets you carry gear on your vehicle's Thule or Yakima roof-rack tracks 2 Heavy-Duty black, square crossbars hold ladder racks, conduit cases and other work
Perfect for travelers, this platform rack lets you carry 2 heavy e-bikes on the back of your RV. It has padded hooks on the ratcheting arms that hold your bikes securely by the frame. Upright mast folds down with bikes unloaded for cargo-area access. it up for storage, you can remove the RV bolt at the back of the hitch bar assembly and replace it with the included pin and clip. In this configuration, you can fold the rack up when you aren't
Custom designed to fit your vehicle so it can be safely towed behind your RV, this base plate has easily removable arms that offer a seamless look when you're not flat towing. Base plate bolts directly to your chassis, so no welding is required. you're finished towing and want to remove the arms, pull the pin to disengage the lock, rotate the arms, and remove them from the receivers. Finally, plug up the now empty receivers with the included
This aluminum tow bar is the absolutely snazziest tow bar you can get. Sleek, lightweight, with built-in LEDs for increased visibility and safe driving at night. The electrical cord comes installed in the cable guide, keeping your setup organized. Arm length (from center of hitch pin hole to center of base pin hole when lined up with arm straight): Extended: 52" Retracted: 40-1/2" Weight capacity: 8,000 lbs Weight: 50 lbs Limited
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent damage from electrical feedback. Includes 7-way to 6-way coiled adapter cord and 6-way socket.
This shock-absorbing pin box works with your gooseneck hitch to give a smooth ride while you tow your fifth-wheel trailer. The all-in-1 box has no air bags to refill or small parts to replace ... Features: 5th-Wheel-to-gooseneck adapter box lets you tow your 5th-wheel trailer with your gooseneck hitch 5th-Wheel pin box replaces the factory pin box on your trailer Coupler attaches to your
Get a smoother towing experience by upgrading to these rubber equalizers that absorb road shock and reduce chucking. Up to 3" of suspension travel helps to compensate for different types of terrain. Fits trailers with double-eye leaf springs.Features: Rubber equalizers replace your trailer's factory steel equalizers to upgrade your setup Delivers a smoother, more comfortable ride Reduces stress on your trailer frame Protects trailer
Replaces the pull pin used to support the Holdup +2 2-bike add-on (Y02446) when installed on your Yakima HoldUp bike rack (Y02443-2). Includes pull pin with lanyard and push pin.Features: Replaces the pull pin used to support the Holdup +2 2-bike add-on (Y02446) when installed on your Yakima HoldUp bike rack (Y02443-2) Includes pull pin with lanyard and push pin Fits: Yakima
Replace the secondary pull pin assembly for your Yakima Two Timer (Y02468), Four Timer (Y02469), or OnRamp (8002706 or 8002707) bike rack. Pull this gray pin on the stinger of your rack to engage the ... Features: Replace the secondary pull pin assembly for your Yakima Two Timer (Y02468), Four Timer (Y02469), or OnRamp (8002706 or 8002707) bike rack Pull this gray pin on the stinger of your rack to
Heavy-duty e-bike rack has a ramp that lets you load your bikes with no lifting required. It folds up for compact storage, and it has built-in handles and wheels for easy transport. Rack tilts with bikes loaded for cargo area access. Locks included. with AutoAttach system - no tools required Slide shank into receiver, insert Auto Pin, and turn hand knob to tighten shank in place Dual oversize red reflectors increase nighttime visibility Durable
7-Way round plug lets you connect your trailer to the 7-way round blade connector of your tow vehicle. Interlock system keeps connections in place. Over-sized finger grips for secure disconnections. Durable ABS plastic housing.
Modular enclosed cargo carrier swings away with gear loaded for cargo area access. Swap the cargo carrier for a bike rack or ski carrier without removing the base from your vehicle, or add a 2nd tier to carry 2 accessories (all sold separately). without tools Same Key System (SKS) locks deter theft of system, cargo carrier, and gear Cores can be swapped out to match your other Yakima accessories Yakima's HitchLock attaches and locks to the end
The automotive-grade pads on these automatically adjusting brakes offer lasting effectiveness. 12" x 2" Assemblies have rust-resistant, e-coated backing plates to protect from debris. Fits 14.5" to 16.5" wheels. screeching reminder to replace your brake shoes. That's because the rivets will scrape against your drum as the friction material wears down. You won't have that noisy problem with bonded brake pads
Filters
