7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. ... These lights will extend into the mounting surface and require that a hole be cut into your trailer.
Your coach is hooked up or the trailer's loaded, but the lights aren't working and there is no time to fix wiring. This wireless, battery-powered kit mounts with magnets and gives you stop, turn, and tail lights without a permanent install.Mounts Fast: Strong magnetic bases stick securely to any trailer or towed vehicle. All Signal Functions: Stop, turn, and tail lights provide everything you need for towing. Great for Temporary Use: Ideal for flat towing or when trailer lights aren't working.
... Red light.Features: Oblong trailer tail light serves 3 functions Stop light Tail light Turn signal light Smoked lens works great with blacked-out style on vehicles or trailers Sonically sealed, waterproof housing and lens unit is submersible LED lights are highly efficient, durable, and long-lasting Durable polycarbonate lens and housing Mounts on surface with built-in black flange - hardware not included 3-Wire pigtail DOT compliant Specs: Overall dimensions: 12-5/8" long x 1" tall x 1/2" deep Mounting holes: 11-3/4" apart on center Weight:.44 lbs Diodes: 9 Voltage: 12V Amp draw: Tail: 0.01A Stop: 0.2A Lifetime LED warranty
7-1/8" Incandescent transit light acts as a brake and tail light. Mounts to the surface of your bus or truck and hardwires to your vehicle. The included gasket creates a weathertight seal against moisture.Features: Round stop/tail light Incandescent bulb is easy to replace Red screw-on lens Steel housing Foam gasket creates a weathertight seal Surface mount - hardware not included Power lead and ground wire connect to your vehicle Specs: Dimensions: 7-1/8" diameter x 2-3/16" thick Distance between mounting holes (center on center): 6-1/4" Compatible with 12V DC systems Bulb type: 1157 Power draw at 12.8 volts: Stop: 2.4 amps Tail: 0.5 amps 3-Year warranty
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID light bar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 20-1/2" long x 1" wide x 3/4" thick Distance between mounting holes: 19-5/8" Diodes: 21 Voltage: 12V Power draw: Stop/turn: 0.265 amps Tail: 0.24 amps Reverse: 0.30 amps Lifetime warranty on LEDs
3/4" Marker and clearance light. Installs in a cutout with the built-in grommet. Has bullet connectors for a plug-in installation.Features: Round marker/clearance light Red LED with clear lens More efficient and durable than incandescent bulbs Polycarbonate housing and lens Recessed mount with built-in grommet Male bullet connectors plug into trailer wiring DOT compliant Meets FMVSS P2 P3 PC requirements Specs: Overall dimensions: 3/4" diameter x 15/16" thick Compatible with 12V DC systems Diodes: 1 Lead: 12" long
3/4" Marker and clearance light. Installs in a cutout with the built-in grommet.Features: Round marker/clearance light Amber LED More efficient and durable than incandescent bulbs Polycarbonate housing and lens Recessed mount with built-in grommet Hardwired with staggered male/female plug DOT compliant Meets FMVSS P2 P3 PC requirements Specs: Overall dimensions: 3/4" diameter x 15/16" thick Compatible with 12V DC systems Diodes: 1 Lead: 12" long
... Stay legal. Look good doing it. With a smoke lens and black housing, this light blends into your black trailer while making you more visible to other drivers, whether you're cruising, turning, braking, or going in reverse.Features: ID light bar for trailers over 80" wide Turn, brake, tail, and backup light Smoke lens with red and white LEDs Black polycarbonate housing Surface mount - Hardware not included 4-Wire pigtail - Hardwires to trailer DOT compliant Specs: Dimensions: 15" long x 1-1/16" wide x 5/8" thick Distance between mounting holes: 14-1/8" Diodes: 15 Voltage: 12V Power draw: 0.29 amps Lifetime warranty on LEDs Quantity: 1 light bar
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". ... Each circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
16" x 1-5/16" x 11/16". Low-profile LED trailer tail light serves as a stop, turn, and tail light for trailers over 80" wide. Surface mount - hardware not included. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
6-7/16" Waterproof light displays brake, tail, and turn signals on your trailer. Mounts in a cutout with a grommet (sold separately) and works with 3-prong plugs.How to Mount Trailer Light This light installs in a grommet (A70GB - sold separately) and requires cutting a hole into your trailer if it doesn't have one already.
This incandescent trailer light kit comes with everything needed to properly light your trailer. 2 Tail lights, 2 amber clearance lights, 2 amber reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware.Features: Incandescent trailer light kit comes with everything needed to properly light a trailer over 80" wide Includes 2 tail lights, 2 amber clearance lights, 2 reflectors, license plate bracket, 25' wiring harness with 4-pole connector, and mounting hardware Sonically sealed, waterproof tail lights and clearance lights are submersible 2 Low-profile combination tail lights (ST16RB and ST17RB) Provide stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex functions Driver's-side light includes license illuminator 2 Amber clearance lights (MC91AB) Self-grounding chrome bases Gaskets for weathertight seal 2 Amber reflectors (RE11AB) meet FMVSS "A" for reflex when properly applied Durable polycarbonate housing on all lights Compatible with 12V DC systems Simple installation with included mounting bracket (LP5SB) and stainless steel mounting hardware Tail lights stud mount to trailer Clearance lights surface mount to trailer Reflectors screw-mount to trailer or attach with adhesive backing 25' Wiring harness with 4-pole connector DOT approved PC rated Specs: Application: trailers over 80" wide Tail light dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep Distance between mounting holes (center on center): 2" Clearance light dimensions: 2-7/8" long x 1-1/2" wide x 1" thick Reflector dimensions: 4-7/16" long x 1-15/16" wide Distance between mounting holes (center on center): 3-15/16" Power draw at 12V: Tail lights: Stop/turn: 2.3 amps Tail: 0.9 amps Clearance lights: 0.2 amps Limited 3-year warranty Note: Over 80" Federal Regulations require additional clearance lights (like MC94RB, sold separately) Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. ... The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
Use integrated switch or wire to a light switch to turn this double dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. ... Or perhaps you need to upgrade the dim, old lights in your enclosed car hauler? This dome light has warm white LEDs that give you brighter light underneath a kitchen cabinet, in a walkway, above a shower stall, or inside a small hunting cabin.
7-9/16" Waterproof light displays brake, tail, and turn signals on your trailer, and mounts to the surface with the built-in flange so you don't need to cut a hole in your trailer. ... Use the built-in flange with mounting holes to secure the light. You can also add the optional snap-on reflector trim ring (A78RXB - sold separately) so your tail lights are more visible.
2" Diameter waterproof LED utility light adds bright white light to an interior area. Miro-Flex design provides increased light output with a contemporary design. Flush mount with grommet (sold separately). ... Features: Compact, round trailer utility light mounts wherever you need a little extra light Miro-Flex design provides increased light output with a contemporary design Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing White LEDs with clear lens Compatible with 12V and 24V DC systems Flush mount with grommet (A54GB - sold separately) Available chrome trim ring (A55CB - sold separately) provides finished look Accepts industry standard two-prong PL-10 plug (A45CB or A49PB - both sold separately) Specs: Overall dimensions: 2" diameter x 1-3/16" deep Diodes: 9 Power draw at 12.8V: 0.013 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-9/16" x 3-5/16" Oval. Waterproof 3-function LED trailer tail light acts as a brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Surface-Mount Light Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light.
2-7/8" x 2-1/8" Square. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing with black base. ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. ... The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. P2-Rated Lights A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage.
4" x 1-3/4". Compact LED trailer light with chrome-plated housing illuminates your license plate. Surface mount to trailer with stainless steel mounting ears. 2-Wire design.Features: Compact LED light illuminates your trailer's license plate LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Snap-on chrome housing Durable polycarbonate housing and lens Clear lens over white LEDs Compatible with 12V DC systems Surface mount to trailer with stainless steel mounting ears - hardware not included 2-Wire design includes power lead and ground wire DOT compliant Specs: Dimensions: 4" wide x 1-3/4" tall x 2-3/16" long Distance between mounting holes (center on center): 3-1/4" Diodes: 5 Power draw at 12.8V: 0.054 amps Lifetime warranty on LEDs Manufacturer Cross Reference Light will work as an exact replacement for: Peterson # 4365X
2" Diameter round. Waterproof, LED trailer light serves as either a side marker or clearance light when properly mounted. Durable polycarbonate housing. Flush mount with grommet (sold separately). ... This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
8-1/16" x 2-7/8" Rectangle. Waterproof incandescent light acts as brake, tail, turn, side marker, side reflector, rear clearance, and rear reflector for trailers over 80" wide. Stud mount - includes hardware.The circuit board is sealed, which means that water will not damage the diodes or circuit board. Combination Lights for Trailers Over 80" Wide If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights.
2-3/4" x 1-3/8" Rectangle. Low-profile LED trailer light with chrome-plated polycarbonate housing illuminates your license plate. Surface mount with foam gasket - hardware included. 2-Wire design.Features: Compact LED light illuminates your trailer's license plate LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Snap-on chrome-plated polycarbonate housing Clear lens over white LEDs Surface mount with foam gasket - hardware included 2-Wire design includes power lead and ground wire DOT approved when properly mounted Requires single light mounted at trailer center, or 2 lights mounted on each side Specs: Quantity: 1 license plate light Overall dimensions: 2-3/4" long x 1-3/8" wide x 1" deep Distance between mounting holes (center on center): 2" Diodes: 2 Power draw at 12.8V: 0.027 amps Lifetime warranty on LEDs Manufacturer Cross Reference Light will work as an exact replacement for: Uni Bond # DL2020 Grote # 61501 Peterson # M434
Filters
