Bunk board mounts to your boat trailer's tongue and supports the bow of your johnboat or flat-bottom boat. Has weather-resistant carpeting and a galvanized steel mounting bracket that adjusts in height and fits trailer frames up to 3" wide.The 2-foot-long board is wrapped in weather-resistant, marine-grade carpet. And the galvanized steel mounting bracket allows you to attach the bunk anywhere along the tongue of your boat trailer to fit the length of your boat. Holes along the length of the mounting bracket allow you to position the board from 5-1/2 to 8 inches above the trailer frame.
Replace the worn-out bow stop on your boat trailer with this heavy-duty rubber one. Stop acts as a bumper to keep your boat from hitting your trailer winch when loading. Designed for use with johnboats.Features: Replaces the bow stop on your boat trailer Keeps your boat's bow in place when it's loaded on your trailer Flat shape is designed for use with johnboat hulls Prevents boat from hitting trailer winch during loading Provides soft spot for bow to bump up against at front of trailer Constructed of heavy-duty rubber Made in USA Specs: Application: bracket with 1/2" diameter shaft Span: 5-3/8" Base dimensions: 3" long x 2-7/8" wide JON BLOCK Yates 3" x 2-7/8" Flat Stop - Black Rubber
Loading your fishing or jonboat at a busy ramp can be tricky, but this side guide roller helps every time. Mounted along your trailer, it gently centers your boat for smooth loading, so you can skip the struggle and get off the water faster.Protects Hull Contact Surface: Polyurethane roller reduces marking during loading. Spins Under Load To Guide Boat Position: Roller spins to guide boat along trailer path. Works With Standard Roller Brackets: Fits 1/2" diameter shaft mounting setups.
Easily load your pontoon boat with these bunk-board-style guide-ons. The boards are covered with marine-grade carpet and their height can be adjusted during installation. ... The galvanized steel support posts mount on top of the crossmember on your pontoon boat trailer's frame. Just slide the posts into the mounting brackets and secure the posts so that the distance between each bunk and pontoon is approximately 2" to 3".
These split roller brackets brace any size roller on your boat trailer. They come in handy in areas where a one-piece bracket will not fit. They feature corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Right- and left-hand brackets support a roller on your boat trailer Fit any length roller that has 5/8" diameter shaft Sturdy, 11-gauge, galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 pair Application: 4", 5", 8", 10", 12" and 18" long rollers Requires 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall These split panel brackets mount upright to a trailer's crossmember.
When bunk boards are not lining up with the hull, these bolster brackets give you room to adjust. Slotted holes let you raise or lower the bunks so the boat sits evenly and loads more smoothly onto the trailer.Works With Common Bunk Setups: Designed for mounting and adjusting trailer bunk boards. Supports One Bunk Board: Includes 2 brackets for a single bunk installation. Features to know about Bolster Brackets for Boat Trailer Bunk Boards These bolster brackets let you mount and fine-tune the height of your trailers bunk boards so the boat sits evenly and loads smoothly.
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…
Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…
Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…
It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…
The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…
Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…
The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…
Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…
When vertical bunks shift, your boat stops loading straight. These brackets keep bunk boards upright and aligned on aluminum trailers so tall hull sides stay guided for smoother launches and straighter loading.Works With Aluminum Trailers: Sturdy support that pairs well with aluminum frames and I-beam layouts. Supports One Bunk Board: Includes 2 brackets for a complete vertical bunk setup. Features to know about Vertical Bunk Brackets for Aluminum Boat Trailers Vertical bunks help guide and steady your boat's tall sides, and these brackets keep those bunks locked in place.
This pair of L-shape brackets make it simple to mount a roller precisely where you need it on your boat trailer. Includes 2 corrosion-resistant brackets.Features: L-shape brackets accommodate a variety of different roller lengths Mount to your boat trailer's frame or tongue Sturdy, 7-gauge galvanized steel construction resists corrosion Made in the USA Specs: Application: 4", 5", 8", 10", 12" and 18" long rollers that take a 1/2" diameter shaft Diameter of mounting holes (each): 3/8" Quantity: 1 pair Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Replace the standard rubber spool roller on your boat trailer with this thermoplastic rubber version from Yates. TPR material is stronger than rubber and softer than polyurethane, and it won't leave marks on your boat.Features: Replaces 1 spool roller on your boat trailer Fits a 4" wide bracket with a 5/8" diameter shaft Eases loading and unloading of boat Supports keel of boat as it sits on trailer Helps to absorb road shock while boat is being towed Constructed of thermal-plasticized rubber (TPR) Non-marking, non-scratching material Stronger and more durable than traditional rubber Softer and more pliant than polyurethane Made in the USA Specs: Overall length: 3-3/4" Overall diameter: 3" Outer diameter of center hole: 5/8"
Universal Roller Brackets will accommodate any size roller length. Brackets feature a 5" slot, which allow vertical adjustment for stabilizing boat on trailer.
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3" long Mounting hole diameter: 1/2"
Help keep your boat in place when it's loaded on your trailer with this zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Mounting hole diameter: 1/2"
Easily raise or lower your boat trailer's bunk board with this slotted, zinc-plated swivel bracket. Bolt the steel piece onto a bolster bracket on your trailer so your bunk tilts toward the hull to keep your boat cradled safely for transport.Features: Swivel bracket tilts your trailer's bunk board when your boat is loaded for transport Allows the bunk to snugly cradle your boat's hull Must be used with a bolster bracket and an additional swivel-and-bolster bracket set (sold separately) for 1 bunk board Slotted design lets you adjust the height of the bracket during installation Bolt-on installation Attaches to bolster bracket on your trailer Mounting hardware not included 11-Gauge, zinc-plated steel resists rust and corrosion Made in the USA Specs: Quantity: 1 swivel bracket Dimensions: 1-3/8" wide x 1-7/8" tall x 3-1/2" long Slot dimensions: 1-1/4" long x 3/8" wide
Add or replace a tie-down attachment point on your boat trailer with this sturdy anchor bracket so you can easily hook up your tie-down strap and secure your boat to your trailer. Strong steel construction is durable.Features: Tie-down anchor adds or replaces an attachment point on your boat trailer Hook tie-down strap (sold separately) to bracket and secure your boat to your trailer 11-Gauge steel construction Weld-on or bolt-on installation Drilling required for bolt-on installation Made in the USA Specs: Quantity: 1 anchor bracket Dimensions: 1-1/2" wide x 3" long x 1-3/4" tall Hole diameter: 3/8"
... A swivel bolster lets you pivot your bunk so it sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.Swivel bolster brackets let you adjust your bunk boards to where they should be, so the hull sits right and loading feels smooth. The 2-3/4" vertical slot gives you the wiggle room to dial in bunk height for your boat, and the non-slip dimples bite into the board to prevent movement and boost load capacity.
Create a fixed-position tie-down point on your boat trailer with this heavy-duty mounting bracket. It bolts onto your trailer and provides a 30-degree mounting angle. Made of corrosion-resistant galvanized steel.Features: Creates a fixed-position tie-down on your trailer Bolts to trailer's frame, wall or floor Mounting hardware not included 30-Degree mounting angle accommodates most tie-down applications Constructed of galvanized steel - long-lasting and corrosion resistant Made in the USA Specs: Quantity: 1 bracket Length: 4" Width: 1-15/16" Small bolt hole diameter: 1/2" Large bolt hole diameter: 7/8" The 30-degree mounting angle of this bracket makes it simple to attach a rope or to hook up straps by spacing the anchor away from the wall or floor, proving easy access to the tie-down hole.
V-wing bolster bracket supports the bunks on your pontoon boat trailer. Short bracket wings and deep cradle are great for narrow pontoons. Galvanized steel material is ideal for saltwater use.Features: Heavy-duty bracket allows you to mount 2 bunk boards on your pontoon boat trailer Mounts on your boat trailer's frame or crossmember Stabilizes bunk boards when at least 2 brackets are used (other bracket sold separately) Short bracket wings surround and stabilize narrow pontoons Deep cradle keeps your boat's pontoons from jostling side-to-side Slotted mounting hole allows for easy adjustment along frame during installation 11-Gauge, galvanized steel construction is sturdy and corrosion resistant Mounting hardware sold separately Made in the USA Specs: Quantity: 1 bracket Application: 4" wide bunk boards Maximum length: 11-3/4" Base length: 8-1/2" Maximum height: 5-1/8" Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Guide your boat on straight every time. This 10" galvanized bracket secures side bunks that guide and steady your hull, with hot-dip protection against spray and saltwater.Made for the Ramp: Hot-dip galvanized finish protects against road grit, spray, rain, and saltwater, to help prevent rust. Sold Individually: Includes 1 bracket for setup on vertical bunks. Features to know about Vertical Bunk Brackets for Aluminum Boat Trailers Vertical bunks help guide and steady your boat's tall sides; this bracket keeps them locked in place.
Keep your boat from drifting or rubbing the trailer. This 8" galvanized bracket secures side bunks that guide and steady your hull, with hot-dip protection against spray and saltwater.Made for the Ramp: Hot-dip galvanized finish protects against road grit, spray, rain, and saltwater to help prevent rust. Sold Individually: Includes 1 bracket for setup on vertical bunks. Features to know about Vertical Bunk Brackets for Aluminum Boat Trailers Vertical bunks help guide and steady your boat's tall sides; this bracket keeps them locked in place.
Heavier pontoons need more contact to ride steady. This wide 6-3/16" galvanized bracket spreads the load across your bunks, keeping tubes square on rough hauls while resisting spray and saltwater season after season.Built for the Ramp: Hot-dip galvanized finish shrugs off road grit, spray, rain, and saltwater to help prevent rust. Straightforward Install: Slotted brackets make placement simple for a tidy, reliable setup. Features to know about Pontoon Bunk Brackets for Even, Scuff-Free Support Your pontoon will ride at its best when your bunks carry the tubes evenly.
This bolster bracket supports your boat trailer's bunk. Constructed of corrosion-resistant galvanized steel, it helps you to properly align your bunk boards and provides years of reliable use.Features: Bolster bracket mounts to your pontoon boat trailer's frame or crossmembers and allows you to mount 2 bunk boards Stabilizes bunk boards when 2 brackets are used (other bracket sold separately) Does not include mounting hardware 3/8" Thick, galvanized steel construction is sturdy and resists corrosion Made in USA Specs: Quantity: 1 bracket Base length: 2-1/2" Arm length (each): 8-1/8" Diameter of mounting holes (each): 7/16" This bracket holds two bunk boards angled toward each other to provide support for one of the boat's pontoons.
This one-piece panel bracket braces a 12" roller on your boat trailer to help you easily load and transport your boat. If features corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.Features: Panel bracket supports a 12" roller on your boat trailer Bolts to your trailer's frame Mounting hardware not included Sturdy, 11-gauge galvanized steel construction resists corrosion 6 Gussets provide extra strength by stiffening the bends Slotted mounting holes allow you to adjust the position during installation Made in the USA Specs: Quantity: 1 bracket Application: 12" rollers Accepts a 13" long x 5/8" diameter roller shaft Dimensions of mounting slots (each): 1/2" wide x 5" tall Spacing of mounting slots: 10" apart on center Typically installed upright on the crossmembers of a boat trailer, panel brackets hold keel and spool rollers that help to keep the boat moving while it is being loaded and to stabilize the keel.
... This swivel top angle replaces the pivoting head on your bolster bracket, letting your bunk sit flush to the hull. Pair it with an upright bracket to complete your setup.It's a simple piece of hardware that makes loading feel steadier. Specs Application Swivel bunk bracket for boat trailer bunk boards Dimensions and Weight Overall dimensions: 3-1/2" long x 1-7/8" wide x 1-1/2" tall Weight: 0.26 lbs Material Material: galvanized steel Color: silver General Warranty: 1-year limited Made in the USA
Galvanized steel swivel bracket attaches to a bolster bracket on your trailer. It lets you tilt your bunk board to the proper angle, ensuring that your boat's hull fits snugly during transport. ... Features: Heavy-duty swivel bracket lets you tilt the bunk board on your boat trailer Helps you to fit the boat hull snugly onto trailer during the loading process Requires 2 swivel brackets and 2 bolster brackets (sold separately) for 1 bunk board Bolt-on installation Attaches to bolster bracket on trailer Does not include mounting hardware 11-Gauge, galvanized steel construction is sturdy and resists corrosion Made in the USA Specs: Quantity: 1 swivel bracket Overall dimensions: 3-1/2" long x 1-3/8" wide x 2" tall Diameter of swivel mounting hole: 1/2" Diameter of flange mounting holes (each): 3/8" Spacing of mounting holes: 2-1/2" apart on center Galvanized Steel Galvanized steel parts are hot-dipped in zinc after being stamped.
Filters
