Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…
view full answer...In order to verify the spindle dimensions so that you can pick out the correct hub/drum you have to get exact dimensions. For that you need to use a digital caliper like part #PTW80157. For how old your trailer is this is especially important as the…
view full answer...The Dexter Trailer Hub Assembly you referenced, part #AKIHUB-440-2-1K is known as an idler hub. An idler is a hub that is no provisions for trailer brakes. It has no brake drum. Part #8-276-5 is an example of a hub/ drum that has a brake drum that…
view full answer...Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…
view full answer...The Trailer Hub and Drum Assembly part #AKHD-545-35-EZ-K would be an excellent replacement for a Tru-Ryde Hub/Drum RVD-H-545. Then for new brakes, I recommend the Hydraulic Trailer Brake Kit part #AKFBBRK-35.
view full answer...It sounds and looks to me like you have the wrong hub assembly for the spindle that is welded to the axle on your trailer. The photos you sent clearly show a 1-1/16 inch spindle similar to the BTR EZ Lube Spindle item #TRU44FR. This is a spindle for…
view full answer...Some trailers are equipped with EZ Lube spindles, which have a grease fitting or zerk in the end of the spindle, and a small hole in the spindle that lets grease enter the interior of the hub and reach the bearings. This allows grease to be added to…
view full answer...Hydrastar has a slip-on style version of their 7k disc brake kit with the part #HSE7K-T1SO. You will also need idler hubs too like with the part #AKIHUB-865-7-1-EZ-K but you should note that we don't have any oil-bath idler hubs in this capacity.…
view full answer...There isn't a way to install zerk fittings on your spindle to make it an EZ lube spindle, but we do have Bearing Buddies which are designed for spindles like yours that do not have the zerk fittings to make installing grease in them easier. You…
view full answer...I wasn't able to cross-reference these numbers but if you're looking for new bearings/races and seals all you need to do is note the capacity or measure. The easiest method would be to crawl under the trailer and look for the axle tag on the…
view full answer...Hey Joe, the DeMaxx Disc Brake Kit part #DE82FR will work on your Wesco trailer as long as it has 5,200-6k axle with idler hubs currently. If you are not sure what your trailer has currently go out and check the axle's sticker/tag for it's…
view full answer...I recommend using the Kodiak disc steel brake kit item #K2R526S. This is a stainless steel 12" Rotor with 6 on 5-1/2 bolt pattern rated up to 6,000 lbs. You will also need to have hubs with a 6 on 5-1/2 bolt pattern and a brake mounting flange…
view full answer...