We've dealt with the rattles, the clanks, and the frustration of constant swaps, so we built a smarter solution. This anti-rattle collar installs fast, stays secure, and works with all your hitch-mounted gear, so you can focus on the road ahead.
Use this anti-rattle clamp to keep your hitch-mounted accessory from rattling and wobbling in your receiver. Great for tow bars, high-low adapters, bike racks, cargo carriers, and more. Quick, simple bolt-on installation.Features: Anti-rattle clamp keeps hitch-mounted accessories stable and quiet Helps to reduce or eliminate wobble and sway within your hitch receiver Ideal for cargo carriers, bike racks, and similar hitch-mounted accessories Effortless, bolt-on installation Place stabilizer plate over the top collar of your hitch receiver, making sure the bent portion rests on the shank of your accessory Insert the U-bolt from the bottom side, positioning it at the front of the collar Tighten nuts and washers, using included wrench Strong, durable steel construction with vinyl coating Black powder coated plate resists corrosion Application: 2" x 2" receivers Hitch receiver must have a ring or collar around it for U-bolt to attach Warning/Note: Not for use with receiver tube extentions.
These leveling scissor jacks with a 10,000-lb combined capacity will keep your RV level and stable. They adjust from 5" to 23-3/4" as your application requires. The bow-tie bases steady the jacks on soft surfaces. Handle included.
Hitch-mounted stabilizer system reduces movement of your 5th-wheel trailer, van, or RV while it's parked. Legs have 4 locking positions for 16" of adjustability. ... Well, all of that is history thanks to the MORryde hitch-mounted stabilizer. This stabilizer will help you keep your RV or camper more level when it's parked without any complicated setup.
Malone anti-rattle hitch clamp stops movement and eliminates wobble between your vehicle's receiver and ball mount. Included bracket plate, U-bolt, and nuts easily install on your receiver. Fits Class II 1-1/4" and 2" hitch receivers.
This steel bracket installs on your 2" hitch receiver to stabilize your hitch-mounted accessories. Use the hand knobs to tighten screws at the top and side of the accessory shank to apply horizontal and vertical pressure and prevent shifting.Features: Bracket stabilizeshitch accessories to prevent movement Fits most cargo carriers, bike racks, steps, and other non-towing accessories for 2" hitches Knobs require 1" of clearance to mount 1 Of the knobs must be positioned on the bottom of the hitch with the bolt facing up towards the vehicle Easy to use Slide the bracket over the shank of your accessory, insert into your hitch, and tighten the screws onto the lip of the hitch Black powder coated steel is durable and resists corrosion Made in the USA 1-Year warranty
Use this hitch immobilizer to keep your ball mount or hitch-mounted accessory from rattling and shifting in your receiver. Great for tow bars, high-low adapters, bike racks, cargo carriers, and more. Quick, simple bolt-on installation.This free play between your trailer hitch receiver and your hitch-mounted accessory is completely normal, but it's also completely preventable. By adding the Quiet Hitch to your setup, you can stabilize your hitch-mounted accessory as it sits in the receiver to eliminate rattle, sway, and all that extra play.
Use this hitch immobilizer to keep your drawbar or hitch-mounted accessory from rattling and shifting in your receiver. Great for bike racks, cargo carriers, and other accessories. Quick, simple bolt-on installation.This free play between your trailer hitch receiver and your hitch-mounted accessory is completely normal, but it's also completely preventable. By adding the Quiet Hitch to your setup, you can stabilize your hitch-mounted accessory as it sits in the receiver to eliminate rattle, sway, and all that extra play.
Prevent theft, accidental disconnect, and sway in your flat tow setup with this kit. Secure your etrailer or Demco tow bar to the base plate and hitch receiver with these sturdy steel locks and anti-rattle hitchstabilizer. Locks are keyed alike.Features: Secures your tow bar to the base plate and hitch receiver to prevent theft and accidental disconnect Add a second hitch lock (e98880 - sold separately) if you have a high-low adapter Keeps tow bar stable and quiet by reducing sway in your hitch receiver with anti-rattle stabilizer Effortless, bolt-on installation Strong, durable steel construction with vinyl coating Black powder coated plate resists corrosion Resists rust and corrosion with chrome-plated steel and covered key slots Includes 2 base plate locks, 1 receiver lock, and 2 sets of keys - 4 keys total Keyed alike Can be matched with other etrailer locks Specs: Fits etrailer and Demco tow bars RV must have a 2" x 2" receiver with a collar Tow bar lock diameter: 1/2" Inside pin length (span): 2-1/8" Overall length: 5-1/2" Receiver lock diameter: 5/8" Inside pin length (span): 2-5/8" Overall length: 6" 1-Year warranty Note: To order keyed alike locks, select "Keyed Alike" from drop-down menu above and enter number of locks in the Quantity box.
Keep control of the cargo in your truck bed with these heavy-duty steel stabilizers. The expandable bar has an easy-to-use ratcheting handle and large rubber feet for superior grip. StabiLoad clamps around the bar to further minimize cargo shifting.
This steel clamp and U-bolt installs on your 2" hitch receiver to stabilize your hitch-mounted accessories. Simply hook the clamp over the lip of your hitch and secure the U-bolt around your accessory using the included nuts to prevent shifting.Features: Clamp and U-bolt stabilizehitch accessories to prevent movement Fits most cargo carriers, bike racks, steps, and other non-towing accessories for 2" hitches Easy to use Hook the clamp over the top lip of your hitch, fit the U-bolt around the accessory, and fasten underneath the hitch using the included nuts Black powder coated steel is durable and resists corrosion Made in the USA Specs: Overall bracket length: 3-3/4" Length from front lip to bolts: 1-3/4" Bolts to back of bracket: 2" Minimum clearance of bumper to tighten bolts: 1/2"
Install this heavy-duty hitch on your vehicle so that you can securely tow your gooseneck trailer. Store the removable ball upside down in the hitch when you aren't towing to get complete bed access. Square ball base won't turn in hitch.Features: Heavy-duty underbed hitch lets you tow your gooseneck trailer Complete truck bed access when you're not towing Remove ball from hitch, flip it upside down, and drop it back into hitch for storage 5/8" Thick, spring-loaded, steel locking pin on end of handle goes all the way through ball to secure it in place Access handle at rear driver's-side wheel well Single-piece, machined ball socket provides rugged durability Square ball base prevents ball from turning in hitch during hookup "Corners only" fit of stowed ball prevents grime buildup inside of hitch Specially designed accessories (sold separately) make it easy to customize the hitch to fit your needs Tow a 5th-wheel trailer with the B&W Companion hitch adapter Spring-loaded safety-chain hookups are built in Simple installation with included custom mounting kit No welding required Truck bed does not have to be removed 3-1/2" Diameter hole must be cut into bed Powder coated steel is sturdy and corrosion resistant Made in the USA Specs: Gross towing weight: 30,000 lbs Vertical load limit: 7,500 lbs Ball size: 2-5/16" Limited lifetime warranty Note: If your truck's suspension has a stabilizer in between the top of the differential housing and the frame, turning over the ball and stowing it in the socket could cause damage to your truck's suspension.
Trying to line up a 5th wheel or trailer in a tight space often means blind spots and a lot of back-and-forth. This wireless electric dolly lets you walk freely around your setup, giving you full visibility and precise control the entire time.You can also connect using a standard round trailer jack post by sliding it into the dolly's receiver tube, giving you another simple attachment option. Changing from a 5th wheel setup to the hitch ball involves removing the stabilizer bars and swapping adapters, so allow a bit of extra time for the transition. Stay in Control with Brakes and Visibility Built In Park trailers safely on firm surfaces like asphalt, grass, or packed gravel.
Ever been trapped by your own gear? You roll up to camp ready to relax with a cold beverage, but your bike rack stands between you and a cooler full of well-earned drinks. The Swagman Swivel allows you to open up the rear without unloading your gear.RV Compatible: Wide design accommodates Class B RVs, making it adaptable to a variety of vehicles. Anti-Wobble Stability: Threaded hitch pin and vertical stabilizer for a secure, rattle-free fit. Features to know about No More Hitch Hassles - Pivot Like a Pro You're all packed up, the family is squeezed into the adventure-mobile, and just as you throw it into drive you spot that pile of last-minute essentials still sitting in the driveway.
These compact, user-friendly scissor jacks are a must-have to keep your RV level and stable. They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. Manual crank handle and drill bit included for flexible operation.
Got a 2-1/2" hitch but need to run 2" accessories? This magnetic reducer sleeve bridges the gap. Slide it into place and feel the magnets grab. Add a ball mount or carrier, slide in your hitch pin, and go.
If every step rattles the dishes or settling into your chair rocks the camper, it's time for more stability. With the I-Beam Stabilizer, everything settles down and you get that firm, planted feeling, like your rig's anchored in place.
This hitch extender converts your existing bike rack or hitch accessory into a swing-away rack. It rotates out 90 degrees to provide easy access to the rear of your vehicle. Fits 2" hitches and bike racks that hold up to 4 bikes. Lock included.Once you have secured the shank of the accessory into the BackSwing's receiver, tighten down the stabilizer bolt and nut on top of the receiver tube until snug. This will hold the accessory in place and ensure a tight connection that reduces movement and noise while on the move.
Quickly and easily stabilize your unhitched fifth-wheel trailer with this sturdy steel tripod. Adjustable hitch cup makes setup a snap.Simply position the tripod beneath your trailer's king pin and adjust the height of the stabilizerhitch cup so that it surrounds the king pin. Use the handle on the hitch cup to fine-tune the height of the stabilizer. Turn counterclockwise until the cup is sufficiently snug against the fifth-wheel king pin.
Quickly and easily stabilize your unhitched fifth-wheel trailer with this sturdy steel tripod. Adjustable hitch cup makes setup a snap, and the included padlock provides an effective theft deterrent.Now use the handle on the hitch cup to fine-tune the height of the stabilizer. Turn counterclockwise until the cup is sufficiently snug against the fifth-wheel king pin.
You may not tow a lot, but if you hit a crosswind, your trailer will sway. Get some control back with this low-cost solution. The telescoping sway bar lets you set just the right amount of resistance. Head unit comes with a pre-torqued hitch ball.Features: Evenly spreads out your tongue weight among all the axles of your tow vehicle and trailer Levels out your ride to restore control and stability Lets you tow to the max capacity of your hitch Adjustable sway control reduces sway caused by wind gusts and passing semis Lets you set the perfect amount of resistance by adjusting the lever Desired head tilt is achieved using stackable washers Add or remove washers from spacer rivet to tilt head up or down Round spring bars are constructed of solid, forged steel for strength and durability Carbide black powder coat protects against corrosion Grease zerks in the head assembly make for simple maintenance System includes head assembly, adjustable shank, hitch ball, sway control bar, spring bars, lift brackets, lift chains, handle, and all necessary hardware Specs: Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems Tongue weight: 800 lbs - 1,000 lbs Maximum gross towing weight: 10,000 lbs Ball size: 2-5/16" Lift bracket positioning: about 30" back from center of coupler Maximum rise: 6" from top of hitch receiver opening Maximum drop: 2-1/2" from top of hitch receiver opening Sway control attachment point: 24" back from center of coupler 1-Year limited warranty Notes: Do not use this hitch if your trailer has surge brakes.
Perfect for e-bikes or regular bikes with fenders, this 1-bike rack uses a pivoting hook with straps to secure your bike's front wheel. The front-mounted handle lets you tilt the rack to access your cargo area without removing your bike.Features: Platform bike rack carries 1 bike using your vehicle's hitch receiver Ratcheting hook with stabilizer strap secures your bike's front wheel - no frame or fender contact Sliding rear-wheel cradle lets you carry bikes with different wheelbases Deep wheel cradle and extra-long wheel strap accommodate fat bike tires Front-mounted handle lets you tilt and fold the rack with ease Tilts with bike loaded to access cargo area Anti-rattle hitch pin reduces movement of rack in hitch receiver Removable adapter sleeve converts the rack for use with 1-1/4" hitches Keyed-alike locks deter theft of your bike and the rack Add-on (sold separately) lets you carry 2 bikes Durable steel construction with black powder coat is rust resistant Specs: Application: 1-1/4" x 1-1/4" and 2" x 2" trailer hitch receivers Requires a minimum of Class II, III, IV rating and 1-1/2" (38mm) distance from hitch pin hole to end of receiver Carrying capacity: 1 bicycle Weight capacity: 60 lbs Maximum tire width: 5.0" Maximum wheelbase: 52" Wheel diameter: 20" - 29" Distance from center of hitch pin hole to: Closest part of rack when folded down: 16-3/4" Closest part of rack when folded up: 6" Farthest part of rack when folded down: 23-1/4" Farthest part of rack when folded up: 16-3/4" Carrier weight: 29 lbs Limited lifetime warranty Rotating Arm with Ratcheting Hook and Fender Strap > The RockyMounts HighNoon FC Solo has a ratcheting hook with a stabilizer strap that grabs your bike firmly by the front wheel, not the frame or the fender.
Quickly and easily stabilize your unhitched gooseneck trailer with this heavy-duty steel tripod. Adjustable-height ball makes setup a snap.Now use the handle at the base of the hitch ball to fine-tune the height of the stabilizer. Turn counterclockwise until the coupling is complete.
This specially designed bar provides additional cargo control when used with your HitchMate cargo stabilizer bar (sold separately). Simply mount the support on the stabilizer bar, adjust along the bar's length and tighten down.Features: Works with HitchMate cargo stabilizer bar (sold separately) to better contain and corral cargo in your truck bed Mounts perpendicular to cargo bar Keeps items from shifting side to side Adjusts along length of cargo bar for optimal positioning Clamps onto bar and tightens in place with included set screws Constructed of heavy-duty steel 1-Year limited warranty 4017 Heininger Holdings Hitch Mate StabiLoad Support
Filters
