Complete your latch setup with this inside L-handle designed for use with T and L handle locks. It offers a comfortable grip and installs easily for a secure, finished interior connection.Specs Quantity: 1 handle
Designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank can be switched out for a motor (LG-142178 - sold separately). Retracted height is 32-3/4". Extended height is 53-1/4".
... They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black powder coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 4 jacks Limited lifetime warranty
Pull the side-facing plunger pin on this heavy-duty jack to release the drop leg. The durable jack screw offers increased strength- lifts up to 5 tons, and supports 6. Sidewind crank included.Features: Heavy-duty utility jack lets you raise and lower your trailer Ideal for agricultural and commercial applications Easily-to-reach side-facing plunger pin deploys the drop leg Works best for setups where the jack is located behind the A-frame Spring return retracts the drop leg hands-free Drop leg extension makes up about half of the total travel Cuts time spent cranking, adjusting, and leveling in half Heayv-duty internal compotents Durable 1" jack screw allows for heavy lifting Smooth screw travel - a second thrust bearing reduces friction and heat buildup Weather-resistant black painted inner and outer tubes Easy to maintain even in a long life of hard work Grease zerk fittings help keep gears working smoothly Footplate minimizes sinking in soft ground Weld-on installation Includes sidewind handle Cross shaft sold separately Specs: Lift capacity: 10,000 lbs Support capacity : 12,000 lbs Lift: 12-1/4" Drop leg adjustment: 13-1/2" Total adjustment: 25-3/4" Overall height: Retracted: 28" Extended: 40-1/4" Drive pin diameter: 1" 3/8" Diameter mounting hole Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing: 3-3/8" on center 1-Year warranty How to Determine the Support Capacity You Need in Your Landing Gear If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity.
... They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 2 jacks Limited lifetime warranty
... They adjust from 5" to 29". Bow-tie bases steady the jacks on soft surfaces. Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allows for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 2,500 lbs Quantity: 4 jacks Limited lifetime warranty
Hello Paul, thanks for reaching out. Yes, you can add two side cameras to the Furrion Vision S+ camera system. For that you will need part #FR84AD. These cameras have plenty of signal strength, so even for a longer 4-horse living quarters trailer…
Thanks for reaching out, and I'm glad you were able to determine fitment of the 7K etrailer Drop Axle #e85SR for your car hauler trailer! The wiring you need to connect all of your electric brakes up to your trailer is 10 gauge wire which we sell…
According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…
Given the issue you described and the fact that you have done a good job of troubleshooting and checking other potential sources for the issue, it sounds like the motor is going bad. Since you mentioned the landing gear working fine for a little bit…
Yes the bearing kit part #DL21792 is the correct kit for your trailer hub BT-100. This comes with two bearings L44643 like we know fit that hub part number.
Hey Michael, thanks for reaching out! The wheel is the same. The difference between the Kenda #AM32424 and the Kenda #KE94WV parts is the tire. The former is a standard Karrier tire while the latter is a Karrier KR53 which is supposed to be more of a…
The Fulton Fold-Away Coupler Hinge Kit #FHDPB230101 is for a trailer tongue 2" wide by 3" tall. having a trailer tongue which is wider than it is tall is very strange. You can use the Fulton Fold-Away Coupler Hinge Kit #FHDPW330300 but will…
Thanks for the pictures Brian. Yes, you are correct the Replacement Inner Member for Dexter DX7.5L Actuator item #DX99FR will replace your UFP A-70 surge brake actuator. The A-"number" was for the weight capacity of the coupler; an A-60 was…
There typically aren't any part numbers stamped onto the trailer spindle that can be used for identification. There are however numbers stamped onto the hub most times which can be used for identification. The TDE46210 tells me you have a 3,500…
Hello Ken, thanks for reaching out. I agree the wording on that page could benefit from being more specific and providing some context. I will work on getting that edited. To answer your question, in regard to the Bauer Products T-Handle Lock for…
We have the Kodiak Disc Brake Kit #K2R1258L12 that is designed to fit your 12,000lb Dexter axle. You will need to ensure that you have the Standard Duty 12,000lb axle as this kit will not fit if its a Heavy Duty 12,000lb axle. If you need help…
Since the trailer was off of the ground it would not take much voltage to stop the wheels from spinning so they may be getting power but they may not be getting enough power due to a short or wiring issue. But 9 times out of 10 weak trailer brakes…
Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. The durable jack screw offers increased strength. Get maximum lifting power in low gear and fast cranking in high gear.Features: 2-Speed jack lets you raise and lower your trailer Low gear offers full lifting power High gear provides ultimate speed Ideal for agricultural and commercial applications Drop leg with spring return increases overall extension for maximum adjustability Plunger pin positioned to the side Durable 1-1/4" jack screw allows for heavy lifting Twin thrust bearings make extending and retracting jack easy Effortless greasing with built-in grease zerk Black painted inner and outer tubes Sidewind handle has curved edges - no sharp ends Handle can be secured for travel with included weld-on clip Footplate minimizes sinking in soft ground Weld-on installation Specs: Height: 28" Retracted 40-1/4" Extended Lift: 12-3/8" Drop leg adjustment: 13-1/2" Total adjustment: 25-7/8" Lift capacity: 10,000 lbs Support capacity: 12,000 lbs Outer tube width: 4" Inner tube width: 3-1/2" Footplate dimensions: 8-1/4" long x 8" wide Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 1-Year warranty
... They adjust from 5" to 23-3/4" as your application requires. The bow-tie bases steady the jacks on soft surfaces. Handle included.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 10,000 lbs 2,500 lbs per jack Quantity: 4 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
... They adjust from 5" to 24". Bow-tie bases steady the jacks on soft surfaces. Manual crank handle and drill bit included for flexible operation.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 6-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Manual handle lets you operate the jacks by hand Drill bit attachment socket lets you operate the jacks with a power drill Black e-coated finish is corrosion resistant Zinc-plated screws and hardware are built to last Specs: Lift: 24" Support capacity (each): 7,500 lbs Quantity: 2 jacks Limited lifetime warranty
... They adjust from 5" to 23-3/4" as your application requires. The bow-tie base steadies the jack on soft surfaces. Includes handle.Features: Scissor jacks help to level and stabilize 5th-wheel, travel, horse and cargo trailers Bow-tie bases keep the jacks steady, even on soft surfaces 8-Hole top plates allow for adjustability when mounting Bearing set on crank side extends jack life Black powder coat finish resists corrosion Handle included Specs: Height: Collapsed: 5" Extended: 23-3/4" Lift: 18-3/4" Length: 24-7/8" when fully collapsed 26" Long including nut Mounting base: 10" long x 3-1/4" wide Mounting holes: 5/8" long x 3/8" wide Round holes: 5/16" diameter Lift capacity: 5,000 lbs 2,500 lbs per jack Quantity: 2 jacks Note: This jack set is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer.
... This 1,500-lb brake winch locks your load in place to prevent rollback, and dual handles let you switch sides for better leverage. Zinc finish resists rust for lasting use.Highlights Dual Handles for Easier Operation: The two-handle design of this winch provides better control. 1,500-lb Load Capacity: Delivers full strength when the cable (sold separately) is at its first wrap on the drum.
Get your boat loaded and unloaded on to your trailer with this manual ratcheting winch. Zinc finish resists rust, making it ideal for marine use. Strap included.Features: Ratcheting hand winch lets you load your boat onto your trailer Solid 1-piece gear for durability Black-web strap with zinc-coated, forged safety hook Thumb latch locks winch in place Rust-resistent zinc finish Comfort-grip handle makes cranking easy Specs: Gear ratio: 4.1:1 Weight capacity: 1,600 lbs Strap length: 23' Handle length: 10-1/2" Comfort grip length: 3-1/2" 1-Year warranty
Replaces the valve for your RV's black-water tank. 3" Diameter passage allows wastewater to travel freely when valve is open. Valve body, seals, nuts, and bolts included.Features: Replacement valve for your RV's black-water tank 3" Diameter passage allows wastewater to travel freely when valve is open Die-cast aluminum handle Valve body, seals, nuts, and bolts included Fits Bladex, Valterra, Bristol, and Anonda valves 1-Year warranty To install, remove the broken waste valve and seals from your black-water tank.
Replaces the valve for your RV's black-water tank. 3" Diameter passage allows wastewater to travel freely when valve is open. Valve body, seals, nuts, and bolts included.Features: Replacement valve for your RV's black-water tank 3" Diameter passage allows wastewater to travel freely when valve is open Plastic handle Valve body, seals, nuts, and bolts included Fits Bladex, Valterra, Bristol, and Anonda valves 1-Year warranty To install, remove the broken waste valve and seals from your black-water tank.
This Dutton-Lainson 2-speed, heavy-duty winch is designed for multipurpose horizontal pulling operations. The handle is oriented on the left side for left-handed use.Features: Heavy-duty winch is designed for horizontal pulling Handle oriented on left for left-handed use High carbon steel gears Permanently lubricated bearings Ergonomic handle grip Zinc TUFFPLATE finish Handle included Strap sold separately Made in the USA Specs: Capacity: 2,500 lbs Overall length: 10-1/2" Body length: 7" Width: 6" Height: 7-1/4" Handle: 11" long 5-Year limited warranty Double Speed Pulling Winch Specifications Model Rated Capacity (2) Drum Hub Diameter Gear Ratio Handle Length Max.
Replace a broken or damaged handle on your truck cap or camper shell with this locking L-shaped handle. Chrome finish is corrosion resistant. Two #751 keys are included.Features: Locking L-shaped handle replaces a broken or damaged handle on your truck cap or camper shell 2 Keyed-alike keys are included Single-sided #751 key Die-cast steel construction is durable and built to last Chrome finish is corrosion resistant Specs: Dimensions: Handle length: 4" Handle base: 2-3/8" long x 1-1/4" wide Pin: 4" long x 5/16" wide x 5/16" thick Distance between mounting holes (center to center): 1-3/4" Lifetime warranty
Replaces the valve for your RV's gray-water tank. 1-1/2" Diameter passage allows wastewater to travel freely when valve is open. Valve body, seals, nuts, and bolts included.Features: Replacement valve for your RV's gray-water tank 1-1/2" Diameter passage allows wastewater to travel freely when valve is open Die-cast aluminum handle Valve body, seals, nuts, and bolts included Fits Bladex, Valterra, Bristol, and Anonda valves 1-Year warranty To install, remove the broken waste valve and seals from your gray-water tank.
Replace the old locking latch on your door, toolbox, or storage compartment with this sturdy paddle-handle latch that locks with the included key. Safety lever allows the lock to be disengaged from the inside. Zinc-plated steel resists corrosion.Features: Locking latch with paddle handle replaces an old latch on your door, toolbox, or storage compartment Locks with included key Safety lever allows the lock to be disengaged from the inside Zinc-plated steel is durable and resists corrosion Made in the USA Specs: Overall dimensions: 5-1/2" long x 4-1/4" tall Fits doors that are 7/8" to 1-3/4" thick Required cutout dimensions: 4-5/8" long x 3-3/8" wide
P-Series replacement handle fits Philips and Creation RV screen doors, as well as other doors with a similar design.Features: Replaces the handle on your P-Series RV screen door Fits Philips and Creation doors, as well as other brands that have doors with a similar appearance White color matches your screen door Made in the USA 1-Year warranty Note: Dimensions shown on black version of this handle.
Install this entry door assist handle on your RV to replace the original version, or to add where needed. The molded grip creates a reassuring feel when seeking stability or support. ... Features: Assist grab handle installs right next to your RV door to offer support on narrow stairs Inner curve features molded finger grip shapes to add control Two molded covers are hinged at either end to hide screw locations Tough ABS plastic is UV-stabilized to prevent yellowing or fading Mounting hardware not included Made in the USA Specs: Mounting holes: 8-7/8" (on center) 1- Year warranty
Door stop replaces 1 worn or damaged stop or handle on your RV's screen door. Designed to work with screens measuring 12" wide.Features: Door stop replaces 1 worn or damaged stop or handle on your RV's screen door Designed to work with screens measuring 12" wide Use as an access handle to close the screen door or as a stopper for slider bubbles White opaque color Lifetime warranty
Spring latch is ideal for securing large trailer tailgates, ramps, and other heavy-duty doors. Cone-style latch pin slides into the keeper even if it's not lined up correctly. Reversible design works on either side of your tailgate.Features: Spring-loaded latch keeps large trailer tailgates, ramps, and other heavy-duty doors closed Pull latch until it clears your keeper to open Release latch inside of the keeper to close Extended handle makes it easy to latch and unlatch Reversible design allows for mounting on either side of trailer Cone-style latch pin slides into keeper even if you don't line it up perfectly Angled edges function as guides to help ease the pin into the keeper 2-Hole mounting plate for secure, bolt-on installation Mounting hardware not included Zinc-plated steel construction is corrosion resistant Specs: Bracket dimensions: 3" tall x 1" wide Distance between mounting holes (center to center): 1-3/4" Mounting hole diameter: 5/16" Latch pin dimensions: 6" long x 3/4" diameter Pin extension: 1-9/16"
Filters
