... Drum is for non-ABS brakes.Features: Trailer hub-and-drum assembly non-ABS provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Oil bath lets you check lubricant level without disassembling the hub Look through clear oil cap to check lubrication Sturdy iron construction Bearings, races, oil seal, oil cap, wheel bolts, and lug nuts are included Hub and drum are made in the USA Specs: Application: Dexter 9,000-lb and 10,000-lb general duty axles Works with axles manufactured after July 2009 Wheel size: 16" to 17-1/2" Bolt pattern: 8 on 6-1/2 Pilot hole diameter: 4-3/4" Drum size: 12-1/4" x 3-3/8" Weight capacity: 5,000 lbs Bearing, Race, and Seal Information Bearings (included) Inner bearing: 387A (2.250" inner diameter) Outer bearing: 25580 (1.750" inner diameter) Races (included) Inner race: 382A Outer race: 25520 Unitized oil seal (included): 10-51 Inner diameter: 2.875" Outer diameter: 3.880" Oil cap kit (included): RG04-300 21-88 Cap 10-163 O-ring 46-32 Plug
This hub-and-drum has races already installed to help speed up setup. Add bearings L68149 and races L68111 (sold separately), then finish the job and get back on the road.Highlights Pre-Installed Races: Inner and outer races are already installed in the hub-and-drum to help make setup easier. Bearings Sold Separately: Complete the installation with bearings L68149 (sold separately) - L68111 races are pre-installed.
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5.2K and 6K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, cap and nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 5,200-lb and 6,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 6 on 5-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 2.45" Weight capacity: 3,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): GS2250DL Inner diameter: 2.25" Outer diameter: 3.376" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 5.2K - 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 5,200-lb, 6,000-lb, and 7,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 8 on 6-1/2" Wheel studs: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 2.72" Weight capacity: 3,500 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS2250DL Inner diameter: 2.25" Outer diameter: 3.376" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.988" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 7K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 7,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 12" diameter x 2" long Works with 12" brake assembly Bolt pattern: 8 on 6-1/2 Wheel studs: 9/16" diameter x 1-5/8 long Grease cap flange diameter: 2.72" Weight capacity: 3,500 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS2250DL Inner diameter: 2.25" Outer diameter: 3.376" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 5,200-lb and 6,000-lb axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 6 on 5-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 2.446" Weight capacity: 3,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): GS2250DL Inner diameter: 2.25" Outer diameter: 3.376" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 7,000-lb axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and nuts for 9/16" studs included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 7,000-lb axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 12" diameter x 2" long Works with 12" brake assembly Bolt pattern: 8 on 6-1/2 Wheel studs: 9/16" diameter x 1-5/8 long Grease cap flange diameter: 2.722" Weight capacity: 3,500 lbs 1-Year limited warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS2250DL Inner diameter: 2.25" Outer diameter: 3.376" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 5" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 6 on 5-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 7,000-lb axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, and nuts for 1/2" studs included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 7,000-lb axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 8 on 6-1/2" Wheel studs: 1/2" diameter x 1-5/16" long Grease cap flange diameter: 2.722" Weight capacity: 3,500 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 14125A (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 14276 Grease seal (included): GS2250DL Inner diameter: 2.25" Outer diameter: 3.376" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Galvanized hub-and-drum assembly is ideal for marine use. For electric or hydraulic brakes. Fits 3.5K E-Z Lube and Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Galvanized finish on drum offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer Zinc-finished bolts resist corrosion Bearings, races, grease seal, grease cap, lug nuts, and 1 hub/drum assembly are included QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including AxleTek, Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Galvanized hub-and-drum assembly is ideal for marine use. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Galvanized finish on drum offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer Zinc-finished bolts resist corrosion Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.988" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 6 on 5-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.988" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 8,000-lb axles. Inner bearing (25580) and race, outer bearing (02475) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Black phosphate finished bolts deter rust Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 8,000-lb axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Actual drum dimensions: 12-1/4" diameter x 4" Works with 12-1/4" brake assembly Bolt pattern: 8 on 6-1/2" Wheel studs: 9/16" diameter x 1-5/16" long Grease cap flange diameter: 2.722" Weight capacity: 4,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 02475 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 02420 Grease seal (included): GS2250DL Inner diameter: 2.25" Outer diameter: 3.376" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 8K E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (02475) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Black phosphate finished bolts deter rust Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 8,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Actual drum dimensions: 12-1/4" diameter x 4" Works with 12-1/4" brake assembly Bolt pattern: 8 on 6-1/2" Wheel studs: 9/16" diameter x 1-5/16" long Grease cap flange diameter: 2.72" Weight capacity: 4,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 02475 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 02420 Grease seal (included): GS2250DL Inner diameter: 2.25" Outer diameter: 3.376" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 2,000-lb axles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 2,000-lb axles with BTR spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Actual drum dimensions: 7-5/8" diameter x 2-7/16" wide Works with 7" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.988" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44649 (1.063" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Galvanized hub-and-drum assembly is ideal for marine use. For electric or hydraulic brakes. Fits 6K E-Z Lube and etrailer Easy Grease axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, and nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Galvanized finish on drum offers excellent corrosion resistance Ideal for use on a boat or snowmobile trailer Zinc-finished bolts resist corrosion Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 6,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #42 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 12" diameter x 2" wide Works with 12" brake assembly Bolt pattern: 6 on 5-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 2.45" Weight capacity: 3,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: 25580 (1.75" inner diameter) Outer bearing: 15123 (1.25" inner diameter) Races (included) Inner race: 25520 Outer race: 15245 Grease seal (included): GS2250DL Inner diameter: 2.25" Outer diameter: 3.376" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 5" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.988" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 2K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 2,000-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with BTR spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Actual drum dimensions: 7-5/8" diameter x 2-7/16" wide Works with 7" brake assembly Bolt pattern: 5 on 4-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,000 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L44649 (1.063" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L44610 Outer race: L44610 Grease seal (included): 10-9 Inner diameter: 1.50" Outer diameter: 1.987" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 4-3/4" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter EZ-Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 5-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.99" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.Features: Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated Compatible with electric and hydraulic drum brakes Sturdy iron construction Zinc-enriched paint on drum adds durability Zinc-finished bolts resist corrosion Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings Lithium complex, multipurpose grease keeps bearings lubricated Bearings, races, grease seal, grease cap, and lug nuts are included QAI and CSA certified Specs: Application: 3,500-lb axles with #84 spindles Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO Drum dimensions: 10" diameter x 2-1/4" wide Works with 10" brake assembly Bolt pattern: 5 on 5-1/2" Wheel studs: 1/2" diameter x 1-1/4" long Grease cap flange diameter: 1.988" Weight capacity: 1,750 lbs Limited 1-year warranty Bearing, Race, and Seal Information Bearings (included) Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Races (included) Inner race: L68111 Outer race: L44610 Grease seal (included): 58846 Inner diameter: 1.719" Outer diameter: 2.565" Thoroughly Tested for Safety This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA).
Filters
