Use this low-profile hook-and-keeper doorholder to keep your trailer door open while you're loading and unloading. Stainless steel construction is rustproof and lasts longer than plastic and standard steel holders. ... Features: Hook-and-keeper doorholder keeps your rear or side trailer door open while you're loading and unloading No need to get a friend to hold the door or find something to prop the door open T-style hook fits securely into the receiver slot to hold the door in place Foldaway hook design provides a clean look and won't get in the way Stainless steel construction is rustproof and resists corrosion Lasts longer than plastic and standard steel holders Hook mounts to the door; keeper mounts to the side of your trailer Mounting hardware not included Specs: Hook length: 4" Hook mounting bracket dimensions: 3" tall x 1-3/4" wide x 3/8" thick Keeper mounting bracket dimensions: 3" tall x 1-3/4" wide x 11/16" thick Distance between mounting holes (center to center) on both brackets: 2-5/16" horizontally; 1" vertically Mounting hole diameter: 3/16"
2-Piece magnetic doorholder keeps your door open so you can use both hands to haul luggage in and out of your RV. Also keeps doors from slamming into walls or the outside of your RV, preventing dents, gouges, and other damage.Features: 2-Piece magnetic doorholder keeps your RV door open so you can haul luggage in and out Mounts inside or outside your RV Frees up your hands to carry your luggage or pet Keeps doors from slamming into your wall when opened Strong magnet in the stem of the doorholder firmly holds door even in strong winds Powder coated finish helps prevent rust and corrosion Stem with base installs vertically or horizontally with included hardware Mount vertically to the floor or ceiling Mount horizontally to baseboard or wall Cap mounts to the back of your door Black color Specs: Holding weight: 12.5 lbs Dimensions: Door magnet with cap: 3-3/8" long Stem: 3" long Base: 11/16" long x 1-3/4" diameter Quantity: 1 door stop
Use this low-profile hook-and-keeper doorholder to keep your trailer door open while you're loading and unloading. Zinc-plated steel construction resists corrosion and lasts longer than plastic holders. ... Features: Hook-and-keeper doorholder keeps your rear or side trailer door open while you're loading and unloading No need to get a friend to hold the door or find something to prop the door open T-style hook fits securely into the receiver slot to hold the door in place Foldaway hook provides a clean look and won't get in the way Zinc-plated steel plunger is corrosion resistant Lasts longer than plastic and standard steel holders Hook mounts to the door; keeper mounts to the side of your trailer Mounting hardware not included Specs: Hook length: 4" Hook mounting bracket dimensions: 3" tall x 1-3/4" wide x 3/8" thick Keeper mounting bracket dimensions: 3" tall x 1-3/4" wide x 11/16" thick Distance between mounting holes (center to center) on both brackets: 2-5/16" horizontally; 1" vertically Mounting hole diameter: 3/16"
Fold-down entry doorholders secure your entry door when stored. Plastic latches measures 1/2" thick and include mounting screws.Features: Fold-down entry doorholders secure your entry door when stored Plastic latches measures 1/2" thick Includes: (2) doorholders and mounting screws Lifetime warranty
Use this low-profile hook-and-keeper doorholder to keep your trailer door open while you're loading and unloading. Lightweight aluminum construction is rustproof and lasts longer than plastic holders. ... Features: Hook-and-keeper doorholder keeps your rear or side trailer door open while you're loading and unloading No need to get a friend to hold the door or find something to prop the door open T-style hook fits securely into the receiver slot to hold the door in place Foldaway hook provides a clean look and won't get in the way Aluminum construction is rustproof Lasts longer than plastic and standard steel holders Hook mounts to the door; keeper mounts to the side of your trailer Mounting hardware not included Specs: Hook length: 4" Hook mounting bracket dimensions: 3" tall x 1-3/4" wide x 3/8" thick Keeper mounting bracket dimensions: 3" tall x 1-3/4" wide x 11/16" thick Distance between mounting holes (center to center) on both brackets: 2-5/16" horizontally; 1" vertically Mounting hole diameter: 3/16"
10-lb Magnet pairs with Bauer steel strike plate (BA88VR - sold separately) to hold a compartment door open on your trailer while you're loading and unloading. Mounting hardware included.Features: Magnet holds a compartment door open while you're loading and unloading Requires Bauer Products steel strike plate (BA88VR - sold separately) Round magnet holds 10 lbs of weight under ideal conditions Glass-filled nylon casing provides strength and stability when exposed to extreme temperatures Mounting hardware included Specs: Dimensions: 3/4" thick x 1-1/2" diameter Distance between mounting holes (center to center): 1"
Hi John! For the Dexter 9-3/4" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 4,200 lbs #DX82UR, you will need the following parts: Replacement Caliper for Dexter 10" Brakes - Driver's Side #K71-773-01 Replacement Caliper for Dexter…
Hey Ryan. We only have one hub that'll fit a straight spindle with 1-3/8" item #L68149 inner and outer bearings. It's the Dexter 9-3/4" Hub-and-Rotor Assembly item #DX82UR. This zinc coated hub and rotor assembly has a 5 on…
Hey Mark, welcome back! I recommend the TireMinder i10 TPMS for RVs and Trailers #TM89FR for your 2023 Escape 5.0. It looks like that is a tandem axle trailer, and this comes with 4 sensors to cover all of your tires. This gets you a reliable system…
If the outer diameter of your spindle where the seal rides is 1.719 inches and the diameter on your hub is 2.565 the #RG06-050 would be the closest matching grease seal we offer. You will need a digital or dial caliper for this measurement like…
If the inner diameter is 1.719 inches and the outer diameter is 2.565 the #RG06-050 would be the closest matching grease seal we offer. You will need a digital or dial caliper for this measurement. The grease seal number you referenced doesn't…
When it comes to upgrading your UFP DB-42 brakes The Kodiak Disc Brake Kit - 10 inch Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 pounds #K2HR35D will upgrade your braking system. This kit is coated with a Dacromet coating that helps prevents corrosion…
The DB-42 is an older style of UFP 3,500 lb axle disc brake components. The Kodiak kits like the part #K2HR35D will fit in replacement of that and would be an upgrade so this would be a great solution. It comes with everything you'd need to…
Ryan, the BulletProof Hitches Weight Distribution System w/ Sway Control #BPH46VR does not come with a shank, but the shank they'd normally use would be the Weight Distribution Shank for BulletProof Hitches Adjustable Ball Mount #358WEIGHTDIST.
The Glo-Brite 9553 you have currently measures 6-1/2" x 2-1/4" x 2-1/4" so for an incandescent replacement option I recommend the Custer Trailer Tail Light - Submersible - Stop, Turn, Tail - Incandescent - Oval - Red Lens #G65R which…
Hey Susan, welcome back. The JR Products Magnetic Baggage Door Catch item #JR44ZR measures 5.50" long x 1.88" wide x 1.13" tall. The distance between the mounting holes is 4" on center. It is also available in black with the…
The LED RV Porch Light part #DG52723VP operates off of 12 volt (V) direct current (DC) power. It has a 175 lumens ratings featuring an LED bulb. The light itself measures to be 6" wide x 3-1/2" tall x 2" deep with mounting holes that…
The Rear View Safety Color Monitor #RVS-6139Q will be able to support up to 4 cameras including the Rear View Safety Forward Facing Camera #RVS-776-FF-5P you mention, and comes with a mounting plate. To wire the monitor and the cameras, use the…
Fold-down entry doorholders secure your entry door when stored. Plastic latches measures 1/4" thick and include mounting screws.Features: Fold-down entry doorholders secure your entry door when stored Plastic latches measures 1/4" thick Includes: (2) doorholders and mounting screws Lifetime warranty
10-lb Magnet pairs with Bauer steel strike plate (BA88VR - sold separately) to hold a compartment door open on your trailer while you're loading and unloading. Strength is doubled when used with negative magnetic holder (BA26VR -sold separately).Features: Magnet holds a compartment door open while you're loading and unloading Requires Bauer Products steel strike plate (BA88VR - sold separately) Round magnet holds 10 lbs of weight under ideal conditions Strength is doubled when used with negative magnetic holder (BA26VR - sold separately) Glass-filled nylon casing provides strength and stability when exposed to extreme temperatures Specs: Dimensions: 1-1/4" thick x 1-1/2" diameter Distance between mounting holes (center to center): 1"
10-lb Magnet pairs with Bauer steel strike plate (BA78VR - sold separately) to hold a compartment door open on your trailer while you're loading and unloading. Strength is doubled when used with negative magnetic holder (BA38VR -sold separately).Features: Magnet holds a compartment door open while you're loading and unloading Requires Bauer Products steel strike plate (BA78VR - sold separately) Oblong-shaped magnet holds 10 lbs of weight under ideal conditions Strength is doubled when used with negative magnetic holder (BA38VR - sold separately) Glass-filled nylon casing provides strength and stability when exposed to extreme temperatures Mounting hardware included Specs: Dimensions: 1/2" thick x 2-1/2" long Distance between mounting holes (center to center): 1-7/8"
Fold-down entry doorholders secure your entry door when stored. Plastic latches measure 1/16" thick and include mounting screws.Features: Fold-down entry doorholders secure your entry door when stored Plastic latches measures 1/16" thick Includes: (2) doorholders and mounting screws Lifetime warranty
10-lb Magnet pairs with Bauer steel strike plate (BA78VR - sold separately) to hold a compartment door open on your trailer while you're loading and unloading.Features: Magnet holds a compartment door open while you're loading and unloading Requires Bauer Products steel strike plate (BA78VR - sold separately) Oblong-shaped magnet holds 10 lbs of weight under ideal conditions Glass-filled nylon casing provides strength and stability when exposed to extreme temperatures Mounting hardware not included Specs: Dimensions: 3/4" thick x 2-1/2" long Distance between mounting holes (center to center): 1-7/8"
Bungee-style doorholder prevents your RV pocket doors from sliding open and closed while on the road. Replaces your ugly, broken, or hard-to-use snap-on straps. ... Features: Bungee-style doorholder helps keep your RV pocket door secured while driving Replaces outdated plastic snap-on straps Can also be used for closet doors or to tie back your curtains Nylon-infused fiberglass bungee cord withstands the jostling of RV travel Prevents pocket doors from sliding open and closed while driving Plastic, heavy duty pull tab helps stretch and wrap the bungee cord around the J-hook Marine grade construction can withstand rain, wind, saltwater, and corrosion Perfect for boat doors and outside compartment doors Quick and easy installation with included hardware - some drilling required Bungee loop holder mounts to the pocket door J-hook mounts horizontally or vertically to the door frame Specs: Overall length: 3-1/2" Bungee loop length: 2-1/2" Quantity: 1 doorholder
10-lb Magnet pairs with Bauer steel strike plate (BA78VR - sold separately) to hold a compartment door open on your trailer while you're loading and unloading. Strength is doubled when used with positive magnetic holder (BA58VR -sold separately).Features: Magnet holds a compartment door open while you're loading and unloading Requires Bauer Products steel strike plate (BA78VR - sold separately) Oblong-shaped magnet holds 10 lbs of weight under ideal conditions Strength is doubled when used with positive magnetic holder (BA58VR - sold separately) Glass-filled nylon casing provides strength and stability when exposed to extreme temperatures Specs: Dimensions: 1/2" thick x 2-1/2" long Distance between mounting holes (center to center): 1-7/8"
Need a better fit for your door setup? This angled entry doorholder uses a metal plunger and rubber socket to keep your door in place. The angled design helps with alignment, making it easier to hold your door open when you need it.Highlights Keeps Door Open: Secures your RV entry door in place while it's open. Angled Mounting Design: Lines up where straight holders wont fit. Plunger and Socket Hold: Metal plunger seats into the rubber socket to hold position. 3" Length: Sized for standard doorholder mounting setups.
Keep your trailer door open while you're loading and unloading with this 6" long hook-and-keeper doorholder. Stainless steel construction is rustproof and lasts longer than plastic holders. ... Features: Hook-and-keeper doorholder keeps your trailer door open while you're loading and unloading No need to get a friend to hold the door or find something to prop the door open Stainless steel construction is rustproof and resists corrosion Lasts longer than plastic holders Mounting screws are included Specs: Dimensions: Hook length: 6" Hook bracket: 3" tall x 1-3/4" wide x 5/16" thick Receiver bracket: 3" tall x 1-3/4" wide x 3/4" thick Distance between mounting holes (center to center): 1" horizontally; 2-1/4" vertically Lifetime warranty
No need to manually latch and unlatch your trailer door with this plunger-and-socket holder. When you're ready to load or unload, just pop the plunger into the rubber socket to hold your door in place. ... Features: Plunger-and-socket doorholder keeps your trailer door open while you're loading and unloading No need to get a friend to hold the door or find something to prop the door open Plunger pops into rubber socket to hold door in place No need to manually latch and unlatch like with other holders Rubber socket makes for quiet operation Zinc-plated steel construction is corrosion resistant Plunger mounts to the door; socket mounts to the side of your trailer Mounting hardware not included Specs: Plunger length: 1-3/4" Overall length (including bracket): 2-1/8" Plunger mounting bracket dimensions: 3" tall x 1-3/8" wide Distance between mounting holes (center to center): 2" Socket mounting bracket dimensions: 3-3/8" tall x 1-15/16" wide x 1" thick Distance between mounting holes (center to center): 2-1/2"
Use this low-profile bumper doorholder to keep your RV or trailer door open while you're loading and unloading. Bumper also prevents the door from banging into the side of your trailer. ... Features: Low-profile rubber bumper doorholder keeps your RV or trailer door open while you're loading and unloading No need to get a friend to hold the door or find something to prop the door open Bumper also prevents the door from banging into the side of your trailer Polymer plastic stem slides into rubber socket to hold the door in place No need to manually latch and unlatch like with other holders Mounting screws are included Specs: Dimensions: Rubber socket: 1-5/8" diameter x 1-1/2" deep Rubber stem: 1" long x 7/8" wide Screw length: 1-3/8" Lifetime warranty
This 45-degree T-style hook-and-keeper doorholder is ideal for trailer doors that don't sit flush with the side of the trailer when open. Spring-loaded hook will stay flat against your trailer when not in use. ... Features: Hook-and-keeper doorholder keeps your trailer door open while you're loading and unloading No need to get a friend to hold the door or find something to prop the door open 45-Degree hook is ideal for doors that have an obstruction or won't sit flush with the side of your trailer Spring-loaded hook will stay flat against your trailer and out of the way when not in use Stainless steel construction is rustproof and resists corrosion Lasts longer than plastic versions Mounting screws are included Specs: Dimensions: Hook length: 3-3/4" Hook bracket: 3" tall x 1-3/4" wide x 1/2" thick Receiver bracket: 3" tall x 1-3/4" wide x 3/4" thick Distance between mounting holes: 1" horizontally; 2-1/4" vertically Lifetime warranty
Keep your trailer door open while you're loading and unloading with this 3-1/2" T-style hook-and-keeper doorholder. Plastic construction is durable and won't scratch up your trailer. ... Features: Hook-and-keeper doorholder keeps your trailer door open while you're loading and unloading No need to get a friend to hold the door or find something to prop the door open Durable plastic construction won't scratch up your trailer like metal holders Black color Mounting screws are included Specs: Dimensions: Hook length: 3-1/2" Hook bracket: 3" tall x 1-3/4" wide x 1/2" thick Receiver bracket: 3" tall x 1-3/4" wide x 3/4" thick Distance between mounting holes: 1" horizontally; 2-1/4" vertically Lifetime warranty
Want to keep your entry door open without it swinging around? This 6" T-style holder gives you a simple way to hold it in place when you need it. It's easy to install and helps keep things steady while you're going in and out.Highlights Keeps Door Open: Secures your RV entry door in place while it's open. T-Style Hold Design: Holds the door in position once it's set. 6" Length: Sized for standard doorholder mounting setups.
Keep your trailer door open while you're loading and unloading with this 4" T-style hook-and-keeper doorholder. Stainless steel construction is rustproof and lasts longer than plastic holders. ... Features: Hook-and-keeper doorholder keeps your trailer door open while you're loading and unloading No need to get a friend to hold the door or find something to prop the door open Stainless steel construction is rustproof and resists corrosion Lasts longer than plastic versions Mounting screws are included Specs: Dimensions: Hook length: 4" Hook bracket: 3" tall x 1-3/4" wide x 5/16" thick Receiver bracket: 3" tall x 1-3/4" wide x 3/4" thick Distance between mounting holes: 1" horizontally; 2-1/4" vertically Lifetime warranty
No need to manually latch and unlatch your trailer door with this plunger-and-socket holder. When you're ready to load or unload, just pop the plunger into the rubber socket to hold door in place. ... Features: Plunger-and-socket doorholder keeps your trailer door open while you're loading and unloading No need to get a friend to hold the door or find something to prop the door open Plunger pops into rubber socket to hold door in place No need to manually latch and unlatch like with other holders Rubber socket makes for quiet operation Zinc-plated steel plunger is corrosion resistant Plunger mounts to the door; socket mounts to the side of your trailer Mounting hardware not included Specs: Plunger length: 2-1/4" Overall length (including bracket): 2-5/8" Plunger mounting bracket dimensions: 3" tall x 1-3/8" wide Distance between mounting holes (center to center): 2" Socket mounting bracket dimensions: 3-3/8" tall x 1-15/16" wide x 1" thick Distance between mounting holes (center to center): 2-1/2"
This angled 4-3/4" doorholder is ideal for trailer doors that don't sit flush with the side of the trailer when open. The plunger and socket keep your RV or trailer door open while loading and unloading. ... Features: Angled plunger-and-socket doorholder keeps your trailer door open while you're loading and unloading Ideal for doors that don't sit flush with the side of the trailer when open Plunger slides into rubber socket to hold the door in place No need to manually latch and unlatch like with other holders Zinc-plated steel construction is corrosion resistant Mounting screws are included Specs: Dimensions: Plunger arm: 4-3/4" long Plunger bracket: 1-1/2" tall x 3" wide Receiver bracket: 2" tall x 3-1/2" wide x 1" thick Mounting hole diameter: 3/16" Distance between mounting holes (center to center): Plunger bracket: 2-1/8" Receiver bracket: 2-3/4" Lifetime warranty
Keep your trailer door open while you're loading and unloading with this 6" T-style hook-and-keeper doorholder. Plastic construction is durable and won't scratch up your trailer. ... Features: Hook-and-keeper doorholder keeps your trailer door open while you're loading and unloading No need to get a friend to hold the door or find something to prop the door open Durable plastic construction won't scratch up your trailer like metal holders Black color Mounting screws are included Specs: Dimensions: Hook length: 6" Hook bracket: 3" tall x 1-3/4" wide x 1-1/4" thick Receiver bracket: 3" tall x 1-3/4" wide x 1-1/8" thick Distance between mounting holes: 1" horizontally; 2-1/4" vertically Lifetime warranty
Filters
