This circuitbreaker junction box provides a neat, clean way to mount multiple circuitbreakers to the firewall of your vehicle. Junction box has space for seven separate circuitbreakers.Features: Junction box for studded circuitbreakers Provides neat, clean mounting point for multiple circuitbreakers Has space for 7 studded circuitbreakers Includes bus bar to dissipate heat buildup Specs: Breaker slots: .20" x .30" 1-Year limited warranty 52-249 Pollak 7-Circuit-Breaker Junction Box
Protect your vehicle's wiring when installing a brake controller by using this 30-amp circuitbreaker to prevent overloads. Connection cables are pre-crimped and include connectors and heat shrink. Designed for trailers with up to 3 axles.Features: 30-Amp circuitbreaker kit protects your vehicle from damaging shorts and overloads when an electric brake controller is installed Provides protection for vehicles towing trailers that have up to 6 brake assemblies Designed for use with Redarc Tow-Pro Elite (331-EBRH-ACCV2), Tow-Pro Classic (331-EBRHV2), and Tow Pro Liberty (RED24FR) brake controllers Connection wires come pre-crimped and with heat shrink to ensure durability and performance Just connect wires to circuitbreaker with included nuts Kit includes: (1) 30-Amp circuitbreaker with protective cover 2 Pre-crimped cables 2 Nuts for attaching cables to circuitbreaker 1 Butt connector Heat shrink Instruction sheet 2-Year warranty
Hey Scott! The Waltech Vision 2.0 #WA74FR can replace those thermostats if they are Dometic 3-wire single zone, 12-button zone CCC, or 5-button multi-zone. See the attached photo. I'm assuming these are R410A AC units (pre-2025). If they're…
Yes sir! You can use the Installation Kit for Go Power Inverters - 200 Amp Fuse - 12V and 24V #342GPDCKIT3 for installing the Go Power Inverter #GP94XR. This new inverter is a pure sine wave, which means it has very clean and smooth power output for…
Hey Derrick! The Dometic RV Furnace #DMC94RR will pretty much work with any RV thermostat that is capable of running a furnace. The only one that might give you trouble is the Furrion Chill Cube wall thermostat since it seems to have issues with a…
Hey Greg, welcome back! The Progressive Dynamics 2000 Watt Inverter w/ Transfer Switch #PD64FR prioritizes shore power over battery power. When shore power is detected at the AC input port the transfer switch will automatically disconnect the…
It sure can Ken. The PowerMax 30A RV Power Center and Distribution Panel item #PM67VR is designed to accept a standard 120VAC, 30 Amp input, which is what you'll get with shore power provided by most generators. This power center has a 55 amp…
Linda, on the DC side, PowerMax power centers like the 45A #PM47VR, 55A #PM67VR, and 60A #PM77VR use standard automotive-style blade fuses, which are widely available and often reused from your existing setup, assuming fuses aren't blown. On the…
Hey Brandon! So the PowerMax #PM47VR is the direct replacement for the WFCO WF-8945 and WF-8945-AD power centers, so if you want a true like-for-like swap, that’s the equivalent option. It keeps you at a 30-amp AC power center with a 45-amp DC…
Jeremy, the PowerMax RV power center with converter #PM67VR is designed as a direct replacement for the WFCO WF-8955 and WF-8955-AD power centers, so you’re staying within the same category of all-in-one AC/DC panels. You’ll be replacing the entire…
Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…
Powder coating is widely considered to be superior to acrylic paint in terms of resistance to chipping, scratching, and color retention. For a wheel application powder coat will definitely look better as well as hold up better than paint. Based on…
Hello Ben, Great question. The RV Holding Tank Heater #372HTH-A uses a separate ground wire because it’s considered a permanently installed, under-RV heating device, not a portable appliance. RV electrical standards require these heaters to be…
This single-pole, thermal circuitbreaker features a continuous cycle with an automatic reset. Circuitbreaker prevents battery from draining and auxiliary application from overdrawing. ... Features: Metal housing with straight mounting bracket 2-Piece design Attached by spot welding Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when source of over-current is removed (2) 10-32 Studs Yellow, dichromate plating (copper color) on battery terminal Zinc plating (silver color) on auxiliary terminal Straight mounting bracket SAE Standard J553 compliant Specs: Applications: Accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Terminal dimensions: 0.66" long Current rating: 20 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 degrees F (-23 degrees C) to 150 degrees F (65 degrees C) Storage temperature: -20 degrees F (-29 degrees C) to 200 degrees F (93 degrees C) 1-Year limited warranty Alternate to 9506P
This surface-mounted 100-amp Type III circuitbreaker remains open on overload and has a unique reset mechanism which provides visible indication of tripped condition. Typically used in auxiliary and accessory circuits. ... Features: Surface mount Thermoset plastic housing 1-Piece design withstands vibration Mounting bracket is integrated into housing Lighter than metal housing Sealed for engine compartment and bilge area applications Splash-proof Dust-proof Unique reset mechanism provides visible indication of tripped condition SAE Standard J1625-compliant Specs: Applications: auxiliary and accessory circuits, such as trucks, buses, RVs, marine, battery charges, and DC audio systems Current rating: 100 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -25 F to 180 F (-32 C to 82 C) Storage temperature: -30 F to 300 F (-34 C to 149 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected rather than current-affected. 54-871PLP Pollak CircuitBreaker - 100 Amperes - Surface Mount - Manual Reset - Plastic Housing - Type 3
2-Piece metal housing with perpendicular mounting bracket. Cycling automatic reset.Features: Metal housing with perpendicular mounting bracket 2-Piece design Attached by spot welding Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when source of over-current is removed (2) 10-32 Studs Yellow, dichromate (copper color) plating on battery terminal Zinc plating (silver color) on auxiliary terminal Straight mounting bracket SAE Standard J553 compliant Specs: Applications: Accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Terminal dimensions: 0.66" long Current rating: 40 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 degrees F (-23 degrees C) to 150 degrees F (65 degrees C) Storage temperature: -20 degrees F (-29 degrees C) to 200 degrees F (93 degrees C) 1-Year limited warranty
Features: Metal housing with perpendicular mounting bracket 2-Piece design Attached by spot welding Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when source of over-current is removed (2) 10-32 Studs Yellow, dichromate plating (copper color) on battery terminal Zinc plating (silver color) on auxiliary terminal Straight mounting bracket SAE Standard J553 compliant Specs: Applications: Accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Terminal dimensions: 0.66" long Current rating: 20 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 degrees F (-23 degrees C) to 150 degrees F (65 degrees C) Storage temperature: -20 degrees F (-29 degrees C) to 200 degrees F (93 degrees C) 1-Year limited warranty
In-line 50-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current situation occurs and return to the run mode as it cools.Features: Plastic housing with perpendicular mounting bracket 1-Piece design withstands vibration Mounting bracket is integrated into housing Lighter than metal housing Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when source of over-current is removed (2) 10-32 Studs Zinc with copper plate topcoat (copper color) on battery terminal Zinc plating (silver color) on auxiliary terminal Perpendicular mounting bracket SAE Standard J553-compliant Specs: Applications: accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Dimensions: Overall length, including mounting bracket: 2.00" Terminals: 0.66" long; 0.69" apart Mounting bracket center to center: 1.56" Mounting bracket hole diameter: 0.23" Housing: 1.28" long x 0.84" wide x 0.72" tall Current rating: 50 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 F to 150 F (-23 C to 65 C) Storage temperature: -20 F to 200 F (-29 C to 93 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected rather than current-affected.
This single-pole, thermal circuitbreaker features a continuous cycle with an automatic reset. Breaker prevents battery from draining and auxiliary application from overdrawing. ... Features: Metal housing with straight mounting bracket 2-Piece design Attached by spot welding Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when source of over-current is removed (2) 10-32 Studs Yellow, dichromate (copper color) plating on battery terminal Zinc plating (silver color) on auxiliary terminal Straight mounting bracket SAE Standard J553 compliant Specs: Applications: Accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Terminal dimensions: 0.66" long Current rating: 30 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 degrees F (-23 degrees C) to 150 degrees F (65 degrees C) Storage temperature: -20 degrees F (-29 degrees C) to 200 degrees F (93 degrees C) 1-Year limited warranty 54-530 Pollak Single-Way, Thermal CircuitBreaker - Cycling/Automatic Reset - 30 Amp Replaces 38630
In-line 40-amp Type I circuitbreaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current situation occurs and return to the run mode as it cools.Features: Plastic housing with perpendicular mounting bracket 1-Piece design withstands vibration Mounting bracket is integrated into housing Lighter than metal housing Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when source of over-current is removed (2) 10-32 Studs Zinc with copper plate topcoat (copper color) on battery terminal Zinc plating (silver color) on auxiliary terminal Perpendicular mounting bracket SAE Standard J553-compliant Specs: Applications: accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Dimensions: Overall length, including mounting bracket: 2.00" Terminals: 0.66" long; 0.69" apart Mounting bracket center to center: 1.56" Mounting bracket hole diameter: 0.23" Housing: 1.28" long x 0.84" wide x 0.72" tall Current rating: 40 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 F to 150 F (-23 C to 65 C) Storage temperature: -20 F to 200 F (-29 C to 93 C) 1-Year limited warranty Note: 12V circuitbreakers are not recommended for 24V applications since the materials are heat-affected rather than current-affected.
Features: Metal housing with perpendicular mounting bracket 2-Piece design Attached by spot welding Cycling automatic reset Cycles continuously during over-current condition Returns to run mode when source of over-current is removed (2) 10-32 Studs Yellow, dichromate (copper color) plating on battery terminal Zinc plating (silver color) on auxiliary terminal Straight mounting bracket SAE Standard J553 compliant Specs: Applications: Accessory circuit, cooling fan, door locks, headlamps, tail lamps, window lift, sunroof, trailering package, electric brake controls Terminal dimensions: 0.66" long Current rating: 30 DC amp Voltage rating: 12 VDC (Voltage Direct Current) Operating temperature: -10 degrees F (-23 degrees C) to 150 degrees F (65 degrees C) Storage temperature: -20 degrees F (-29 degrees C) to 200 degrees F (93 degrees C) 1-Year limited warranty
Filters
