If you're tired of fighting your bunks every time you load and unload your boat, these slides cut drag and self-center your boat so it loads straight and smooth. This 4-piece kit is pre-formed to quickly cover two 8' bunks.Highlights Makes Launching and Loading Simple: Polyvinyl creates less drag so your boat glides on and off your trailer easily. Keeps Boat Aligned: Self-centering design guides your boat straight onto the bunks. Protects Hull and Bunks: Replaces soggy, dirt-filled carpet to protect bunks and prevent scuffs to your boat.
Tired of dragging your boat on soggy carpet? Skip the bunk replacement with these Tie Down slicks. They bolt right over your carpeted bunks to create a smooth PVC surface, helping your boat slide on and off with less strain.A Smooth Surface for Easier Loading If you're tired of winching against sticky bunks, these slicks are the fix. The molded PVC surface drastically reduces drag, so your boat glides off and onto the trailer with less effort.
If you're tired of fighting your bunks every time you load and unload your boat, these slides cut drag and self-center your boat so it loads straight and smooth. This 8-piece kit is pre-formed to quickly cover two 8' bunks.Highlights Makes Launching and Loading Simple: Creates less drag so your boat glides on and off your trailer easily. Keeps Boat Aligned: Self-centering design guides your boat straight onto the bunks. Protects Hull and Bunks: Replaces soggy, dirt-filled carpet to protect bunks and prevent scuffs to your boat.
Tired of dragging your boat on soggy carpet? Skip the bunk replacement with these Tie Down slicks. They bolt right over your carpeted bunks to create a smooth PVC surface, helping your boat slide on and off with less strain.A Smooth Surface for Easier Loading If you're tired of winching against sticky bunks, these slicks are the fix. The molded PVC surface drastically reduces drag, so your boat glides off and onto the trailer with less effort.
Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller BunksFeatures: Roller bunk bracket, for mounting galvanized Roller Bunks models Fits: DL21740 (model #6387) and DL21741 (model #6388) Sold individually 4 Needed to mount a pair of roller bunks Die-formed of heavy gauge steel plate TUFFPLATE finish Measurement between slotted holes from center to center: 1-1/4" Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish.
Dutton-Lainson roller bunk bracket for boat trailers.Features: Roller bunk bracket for mounting Dutton-Lainson standard roller bunks Fits: DL21754 (model 6345) and DL21755 (model 6355) Formed of heavy gauge steel plate TUFFPLATE finish Sold individually 4 Needed to mount a pair of roller bunks Specs: Overall length: 10-3/4" Overall width: 3" Inside width: 2-3/4" Slot length: 7-1/4" Slot width: 7/16" Slots center-to-center: 1-1/4" Top bracket to the start of the slots: 3" Top of bracket to the end of the slots: 10-3/8" Hook: 1-3/4" wide Hole diameter: 3/8" Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish.
Yes, the temperatures you mentioned are normal. If you were getting over 200 degrees that would be a bad sign. But typically if all of the hubs are the same temperature you're good and it's only really an issue if one of the hubs is hotter…
The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…
Your picture didn't make it through but it sounds like you would like to upgrade your tire and wheels on your trailer. You may substitute a 14 inch tire and wheel as long as you have both the wheel well height and width clearance for it, the…
The smallest diameter 13 inch trailer wheel and tire will have a diameter of 24.1 inches (ST175/80-13). There are 3 common 12 inch trailer tire sizes: 4.80-12 has a diameter of 20.5 inches, 5.30-12 has a diameter of 21.9 inches, and 145/80-12 has a…
Hey Ryan, the bracket kit part #PF1135-BKT-2 is normally the best solution as long as the trailer has a frame rail that runs the perimeter of it. Then if the frame is 2 inches wide you would want the part #CE15284GA and you'd be set. The other…
I'd be happy to help you with that. For starters, the #F008584-2 fenders you'd looked at are designed for 14 inch wheels, you'd be better served going with the #F008585-2 which are designed for 15 inch wheels like the ones you have.…
Your current tire should have some type of code on it that indicates its size. The Kenda K371 Bias Trailer Tire, #AM10002, is size 4.80/4.00-8. It fits on 8 by 3-3/4 inch rims. It sounds like the 46 and 27 inch measurements you have given are the…
You do indeed have a 12 inch rim. When you measure the diameter of the wheel, you'll need to measure the diameter of he wheel where the tire bead meets the wheel. I've provided you a cutaway diagram of a wheel showing where the measurement…
When choosing tie-down straps like the BoatBuckle G2 Retractable Tie-Down Strap, #IMF14220, you will want to keep a few things in mind. Boat tie-downs are designed for normal highway driving. The purpose of most boat tie-downs is to strap the…
Actually, the width of a trailer is determined by it's widest point. If the wheels are outside of the frame of the trailer then the width is measured for that trailer from outside of the fender to outside of the fender on the other side of the…
The Fulton Plastic Fender with Top Step, part #F008553, does not come with mounting hardware. Fulton does not provide mounting bracket kits for the fenders. You can use your fenders original mounting brackets or use the Redline Galvanized Steel,…
There isn't a whole lot of difference between Dutton-Lainson roller bunks #DL21741 and CE Smith roller bunks #CE27710. Both have 5 foot long sections. Each section is rated for 1500 pounds. There are 6 rollers per section on both. Both are made…
If you're tired of fighting your bunks every time you load and unload your boat, these slides cut drag and self-center your boat so it loads straight and smooth. This 8-piece kit is pre-formed to quickly cover two 8' bunks.Highlights Makes Launching and Loading Simple: Creates less drag so your boat glides on and off your trailer easily. Keeps Boat Aligned: Self-centering design guides your boat straight onto the bunks. Protects Hull and Bunks: Replaces soggy, dirt-filled carpet to protect bunks and prevent scuffs to your boat.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 6-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.These brackets allow you to install the bunk boards at different heights. In addition, they enable the bunk boards to tilt to accommodate and support boat hulls of different sizes.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 7' long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.These brackets allow you to install the bunk boards at different heights. In addition, they enable the bunk boards to tilt to accommodate and support boat hulls of different sizes.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.Helps Your Boat Slide On Easier This wrap's slick surface reduces friction, so instead of cranking your boat off sticky bunks, your boat will glide on and off the trailer with less effort.
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 2-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.Features: Carpeted, wooden bunk boards support your boat's hull during trailering Marine-grade black carpeting is strong, soft, and weather resistant Minimizes scratches on the hull Resists mold and mildew Rinses off easily and dries quickly Bunk boards install easily in either of 2 ways Mount to existing brackets on trailer frame Attach to trailer frame with swivel brackets (sold separately), allowing for height and angle adjustment Specs: Quantity: 2 bunk boards Dimensions: 24" long x 2" wide x 4" tall
These carpeted bunk boards replace your boat trailer's worn-out bunk boards. Each 5-foot-long 2x4 is covered with durable, marine-grade carpet that helps protect the finish on your boat's hull and is easy to clean.These brackets allow you to install the bunk boards at different heights. In addition, they enable the bunk boards to tilt to accommodate and support boat hulls of different sizes.
Carpeted bunks wear out and drag against your hull. Amber polyvinyl rollers trade that drag for a smooth, easy glide, even in shallow water. Made to last a lifetime, they resist sun and water without marking your boat.Highlights Upgrade from Carpet: Replace worn, soggy bunks with rollers that keep your boat moving smoothly at the ramp. Roll Instead of Drag: Rollers let your boat glide on and off like it's on wheels, making shallow-water launches easier than with carpeted bunks.
Channel-style roller bunks upgrade your boat trailer's standard bunk boards, allowing for smooth loading and unloading and superior hull protection for your boat. ... Features: Channel-style roller bunks upgrade your boat trailer from standard bunk boards Ease boat loading and unloading - boat rolls smoothly over bunks Support hull during trailering Heavy-duty, black rubber rollers absorb road shock and protect hull from scratches 12 Gauge galvanized steel construction is sturdy and rust resistant Pre-assembled bunks easily install in either of 2 ways Mount to existing bunk boards (hardware not included) Attach to trailer frame with swivel mounting brackets (CE10003G-4 - sold separately), allowing for height and angle adjustment Made in the USA Specs: Quantity: 2 bunks with 6 rollers each Weight capacity: 1,500 lbs Bunk length: 5' Roller dimensions: 4-3/4" wide x 2-1/2" diameter Channel width: 2-1/8" Top of roller to bottom of channel: 2-13/16" CE Smith's roller bunks convert your boat trailer's guide-ons from bunk board style to roller style.
D-L roller bunks provide a quick, easy, and inexpensive way to upgrade bunk-style trailers to rollers. Features rubber rollers with durable, wear-resistant inner surface and soft, boat-cushioning outer surface.Features: Rubber rollers Durable, wear-resistant inner surface Soft, boat-cushioning outer surface Universal mount attaches either vertically or horizontally Installation hardware not included Optional roller bunk bracket (sold separately) 12 Sets of 3 rollers Constructed of 12-gauge, galvanized steel Zinc-plated steel roller hardware included Made in the USA Specs: Bracket width: 1-7/8" Bracket depth: 1-7/8" Wheel-to-wheel width: 4-3/4" Capacity: 3,000 lbs Quantity: 2 roller bunks The deluxe style provides a universal mount that attaches directly to either vertically or horizontally positioned bunk boards and has 3 rollers per set.
If you're tired of ripping carpet off your old bunks, tearing out staples, and attaching new carpet, these 5' boards come ready to go. Traditional, marine carpeted bunks cushion your hull and give you controlled unloading at the ramp.Smooth, Controlled Loading This marine-grade carpet provides a cushioned surface between your boat and the bunk boards, helping protect fiberglass, painted, or aluminum hulls from your wooden bunks. It gives you a traditional look with steady, controlled movement so your boat loads and unloads without sudden shifts on steep ramps.
Bunk-board kit lets you build your own guide-ons to ease loading of your boat onto your trailer. Kit includes 90-degree-angled tubes, brackets, hardware, and enough marine-grade carpet for (2) 69" long 2x4 boards (not included).Features: Bunk-board kit lets you create 2 guide-ons to support your boat and keep it centered while you're loading it onto your trailer 2x4 Lumber for bunk boards not included 90-Degree-angled tubes let you mount the bunks close to your boat Great for narrow boats Bolt-on installation - clamp onto top or bottom of your trailer's frame Pre-galvanized steel construction is sturdy and corrosion-resistant Marine-grade carpeting lines bunk boards to protect your boat's finish 2 Rolls included to cover 2 boards U-bolts, brackets, and mounting hardware included Made in the USA Specs: Application: trailer frames up to 3" wide x 4-1/2" tall 2 Extra-long U-bolt kits (CE11416 - sold separately) are required to mount on frames up to 3" wide x 5-1/4" tall 2 Sets of I-beam clamps (CE27682A - sold separately) can be used to mount on I-beam frames that are larger than 3" wide x 4-1/4" tall Carpeting dimensions (per roll): 11" wide x 12' long Maximum 2x4 length for carpeting: 69" Pre-Galvanized Steel Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized.
A boat that refuses to slide is enough to ruin a good morning of fishing. Cutting drag with every launch, this low-maintenance bunk wrap lets your boat glide smoothly off and on your trailer, giving you more time on the water than at the ramp.Helps Your Boat Slide On Easier This wrap's slick surface reduces friction, so instead of cranking your boat off sticky bunks, your boat will glide on and off the trailer with less effort.
Rub marks, squeaks, or crooked loading? A swivel bolster adds a little pivot so the bunk sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.Made for the Ramp: Hot-dip galvanized steel holds up to spray, rain, and road grit. Non-Slip Stability: Dimples help lock the bunk in place, boost load capacity and keep your boat steady when loading. Features to know about Adjustable Boat Trailer Bunk Bracket for Centered, Scuff-Free Loading When a boat loads crooked or rubs the same spot every trip, it's usually a bunk alignment issue, not the hull.
Bunk board mounts to your boat trailer's tongue and supports the bow of your johnboat or flat-bottom boat. Has weather-resistant carpeting and a galvanized steel mounting bracket that adjusts in height and fits trailer frames up to 3" wide.Features: Carpeted, wooden bunk board supports the bow of your flat-bottom boat during trailering Marine-grade black carpeting with velvety finish is strong, soft and weather resistant Minimizes scratches on boat's hull Resists mold and mildew Rinses off easily and dries quickly Heavy-duty bracket lets you mount bunk board 5-1/2" - 8" above trailer tongue Holes in bracket allow for height adjustment Galvanized steel construction is sturdy and resists corrosion Mounting hardware included Copper-free wood is safe to use with aluminum and steel boats Made in the USA Specs: Fits: 2" and 3" wide trailer tongues Quantity: 1 bunk board Bunk board dimensions: 24" long x 1-3/4" wide x 3-3/4" tall 3-Year sun-fade warranty on carpeting This carpeted bunk board provides bow support for your johnboat or flat-bottom boat during transport and storage.
Rub marks, squeaks, or crooked loading? A swivel bolster lets you pivot your bunk so it sits flush to your hull. You set the height, it spreads the boat's contact, and you'll load your boat smoother while protecting it's finish.Highlights Get Your Boat Hull to Sit Right: The 2-3/4" vertical slot lets you nudge the bunk height until the boat centers on your trailer. Protect Your Finish: An 8" base spreads the load so your boat doesn't rub in one place, and boards won't dig in, squeak, or sag.
... Black rubber rollers strike the balance between smooth rolling and added grip, so your boat loads with control and stays put until youre ready to push off.Highlights Upgrade from Carpet: Replace worn, soggy bunks with rollers that keep your boat moving smoothly at the ramp. Roll Instead of Drag: Rollers let your boat glide on and off like it's on wheels, making shallow-water launches easier than with carpeted bunks.
If you're tired of ripping carpet off your old bunks, tearing out staples, and attaching new carpet, these 3' boards come ready to go. Traditional, marine carpeted bunks cushion your hull and give you controlled unloading at the ramp.Smooth, Controlled Loading This marine-grade carpet provides a cushioned surface between your boat and the bunk boards, helping protect fiberglass, painted, or aluminum hulls from your wooden bunks. It gives you a traditional look with steady, controlled movement so your boat loads and unloads without sudden shifts on steep ramps.
Guide your boat on straight every time. This 10" galvanized bracket secures side bunks that guide and steady your hull, with hot-dip protection against spray and saltwater.Highlights Made for Vertical Bunks: A wide 5" plate supports tall side bunks so your boat's hull rides steady and loads predictably. Resists Twisting: Thick steel resists twist and flex, keeping your bunk boards from walking on long hauls.
Filters
