bing tracking image

Search: atwood hitch   >  

Result: atwood hitch

Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs - DM72VR

Retail: $296.79
Our Price: $154.40
In Stock
Applies your boat trailers free-backing drum brakes. Listen for the click on the eZ-Latch when coupling, and you'll never worry about highballing ever again. Made in the USA with heavy-duty, zinc-plated steel, and other corrosion-resistant parts. when latch is in closed position - just drop coupler over hitch ball and latch will snap into place Accommodates a trailer lock to deter would-be thieves Zinc plating offers corrosion resistance 120-Hour
  • Surge Brake Actuator
  • Drum Brakes
  • 2 Inch Ball Coupler
  • 7000 lbs GTW
  • Bolt-On
  • Boat Trailer
  • Construction Trailer
  • Travel Trailer
  • Farm Trailer
  • Utility Trailer
  • No Lockout
  • Demco

Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs - T43397007K

Retail: $379.99
Our Price: $312.43
Easy and convenient turn-wheel latch lets you fit the coupler on this corrosion-resistant, surge-type actuator to a hitch ball measuring 1-7/8", 2" or 50 mm. Designed for use with drum ...
  • Surge Brake Actuator
  • Drum Brakes
  • 1-7/8 Inch Ball Coupler
  • 2 Inch Ball Coupler
  • 7000 lbs GTW
  • Bolt-On
  • Construction Trailer
  • Boat Trailer
  • Farm Trailer
  • Travel Trailer
  • Utility Trailer
  • No Lockout
  • Dexter

Dexter DX7.5L A-60 Brake Actuator with Fill Cap - Bolt On - Drum - 2" Ball - Zinc - 7,500 lbs - DX33FR

Our Price: $359.16
In Stock
Use this corrosion-resistant actuator to synchronize your trailer brakes with your tow-vehicle brakes. Over-center latch mechanism only engages when the actuator is fully seated on 2" hitch ball ...
actuator is fully seated on hitch ball Aluminum master cylinder is better at reducing corrosion than cast steel master cylinders Zinc plating offers excellent corrosion resistance Bolt-on installation Manual
  • Surge Brake Actuator
  • Drum Brakes
  • 2 Inch Ball Coupler
  • 7500 lbs GTW
  • Bolt-On
  • Travel Trailer
  • Boat Trailer
  • Construction Trailer
  • Utility Trailer
  • Farm Trailer
  • No Lockout
  • Dexter

Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs - 099-175-00

Our Price: $337.10
In Stock
Use this corrosion-resistant actuator to synchronize your trailer brakes with your tow-vehicle brakes. Drop-N-Go auto-latch coupler automatically locks your coupler in place on 2" hitch balls ...
Features: Hydraulic actuator synchronizes trailer brakes with tow-vehicle brakes Drop-N-Go coupler mechanism ensures easy, secure connection Automatically seats around and latches onto the hitch ball
  • Surge Brake Actuator
  • Drum Brakes
  • 2 Inch Ball Coupler
  • 7500 lbs GTW
  • Bolt-On
  • Boat Trailer
  • Construction Trailer
  • Farm Trailer
  • Utility Trailer
  • Travel Trailer
  • No Lockout
  • Dexter

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs - LG-1

Retail: $994.03
Our Price: $752.59
In Stock
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 5.5K. of the other fifth-wheel landing gear on the market, including Atwood and Lippert. If you're replacing your old landing gear, you can install this set from Stromberg Carlson using your existing
  • 5th Wheel Camper
  • Weld-On
  • Electric Jack
  • 5001 - 6000 lbs
  • Steel
  • Landing Gear
  • 2 Jacks
  • Stromberg Carlson

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs - LG-4

Retail: $1,086.99
Our Price: $845.77
In Stock
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K. compatible with most of the other fifth-wheel landing gear on the market, including Atwood and Lippert. If you're replacing your old landing gear, you can install this set from Stromberg Carlson using your
  • 5th Wheel Camper
  • Weld-On
  • Electric Jack
  • 6001 - 7000 lbs
  • Steel
  • Landing Gear
  • 2 Jacks
  • Stromberg Carlson

New Arrivals — From Our Shop to You!

Chosen by folks who live and breathe this, just like you.

New Arrivals — From Our Shop to You!

Chosen by folks who live and breathe this, just like you.

Kristin
Kristin etrailer team member
Kristin etrailer team member

15

Years

|

589

Installations

15,864

Customers Helped

Any questions? Chat us from Missouri

Lippert Electric Landing Gear Set - 37" Lift - 6,000 lbs - LC333964

Retail: $1,067.95
Our Price: $726.69
In Stock
Give your 5th-wheel trailer or camper some new legs! Upgraded motor works nearly twice as fast as the standard 80 RPM base model. Outer tubes are 29-1/2" long with 15-1/2" between weld stops. Total lift includes 16" of drop leg.Features: Replacement landing gear kit for a manual or battery-powered setup Components can replace most Lippert (LCI), Atwood, Venture, etrailer, or Pac-Rim parts Cross shaft extends to fit your
  • 5th Wheel Camper
  • Weld-On
  • Electric Jack
  • 5001 - 6000 lbs
  • Steel
  • Landing Gear
  • 2 Jacks
  • Lippert

Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs - LG-183708

Retail: $574.32
Our Price: $563.23
In Stock
Manual landing gear lets you jack up your fifth-wheel trailer quickly and easily. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity of set is 8,000 lbs. (LG-210475 - sold separately) instead if you often camp on soft ground. This system and its parts were designed to be compatible with most of the other fifth-wheel landing gear on the market, including Atwood
  • 5th Wheel Camper
  • Weld-On
  • Manual Jack
  • 7001 - 8000 lbs
  • Steel
  • Landing Gear
  • 2 Jacks
  • Stromberg Carlson

Lippert Electric Landing Gear w/ Handle - Outside Mount - 34-3/4" Lift - 5,000-lbs - LC712689

Retail: $1,631.95
Our Price: $1,258.11
In Stock
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting
  • 5th Wheel Camper
  • Weld-On
  • Electric Jack
  • 4001 - 5000 lbs
  • Steel
  • Landing Gear
  • 2 Jacks
  • Lippert

Lippert Manual Landing Gear Set w/ Handle - 37" Lift - 6,000 lbs - LC333966

Retail: $778.95
Our Price: $537.91
In Stock
Just the bones - replacement setup comes with everything but the electrical. Measures 15-1/2" between weld stops. 16" of drop leg makes up almost half of the total lift. Get your 5th wheel back into action!Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting
  • 5th Wheel Camper
  • Weld-On
  • Manual Jack
  • 5001 - 6000 lbs
  • Steel
  • Landing Gear
  • 2 Jacks
  • Lippert

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs - LG-2

Retail: $1,068.20
Our Price: $732.22
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 33-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 5.5K.. This system and its parts were designed to be compatible with most of the other fifth-wheel landing gear on the market, including Atwood and Lippert. If you're replacing your old landing gear, you
  • 5th Wheel Camper
  • Weld-On
  • Electric Jack
  • 5001 - 6000 lbs
  • Steel
  • Landing Gear
  • 2 Jacks
  • Stromberg Carlson

Lippert Electric Landing Gear w/ Handle - Inside Mount - 34-3/4" Lift - 5,000-lbs - LC712690

Retail: $1,632.95
Our Price: $1,402.06
Give your 5th-wheel trailer or camper some new legs! 19-1/2" inside to inside between weld stops. Includes manual crank and 1 motor, with room to add a 2nd one (sold separately).Features: Replacement landing gear kit for a manual or battery-powered setup Gearbox works with single- and dual-motor configurations Components can replace most Atwood and Venture parts Connecting
  • 5th Wheel Camper
  • Weld-On
  • Electric Jack
  • 4001 - 5000 lbs
  • Steel
  • Landing Gear
  • 2 Jacks
  • Lippert

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs - LG-3

Retail: $1,054.35
Our Price: $779.53
In Stock
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K. were designed to be compatible with most of the other fifth-wheel landing gear on the market, including Atwood and Lippert. If you're replacing your old landing gear, you can install this set from
  • 5th Wheel Camper
  • Weld-On
  • Electric Jack
  • 6001 - 7000 lbs
  • Steel
  • Landing Gear
  • 2 Jacks
  • Stromberg Carlson

Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs - RVLG-8HDL

Our Price: $281.47
In Stock
Designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank can be switched out for a motor (LC142178 - sold separately). Retracted height is 32-3/4". Extended height is 53-1/4".
  • 5th Wheel Camper
  • Weld-On
  • Manual Jack
  • 7001 - 8000 lbs
  • Steel
  • Landing Gear
  • 2 Jacks
  • etrailer

Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs - DM62VR

Retail: $390.39
Our Price: $213.85
In Stock
Made in the USA with a wear-resistant, self-lubricating lining, this surge actuator will work smoothly for years to come. EZ-Latch coupler ensures you'll always have a strong, secure connection. Zinc plating makes it great for boat trailers. keeps your trailer brakes from activating when your reverse lights come on Makes hitching up fast, safe, and super-easy EZ-Latch coupler lets you hook up when latch is in closed position Latch will snap
  • Surge Brake Actuator
  • Disc Brakes
  • 2 Inch Ball Coupler
  • 7000 lbs GTW
  • Bolt-On
  • Travel Trailer
  • Construction Trailer
  • Farm Trailer
  • Boat Trailer
  • Utility Trailer
  • Electric Lockout
  • Demco

Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K - DX89FR

Our Price: $341.62
In Stock
Use this corrosion-resistant actuator to synchronize your trailer brakes with your tow-vehicle brakes. Over-center latch mechanism only engages when the actuator is fully seated on 2" hitch ball ...
when you shift into reverse Low-profile coupler latch ensures easy, secure connection Over-center latch mechanism only engages when the actuator is fully seated on hitch ball Aluminum master cylinder is
  • Surge Brake Actuator
  • Disc Brakes
  • 2 Inch Ball Coupler
  • 7500 lbs GTW
  • Bolt-On
  • Farm Trailer
  • Travel Trailer
  • Construction Trailer
  • Boat Trailer
  • Utility Trailer
  • Electric Lockout
  • Manual Lockout
  • Dexter

Electric Jack w/ Footplate and 7-Way Plug - A-Frame - 25-1/8" Lift - 3.5K - Black - EJ-3527-BBX

Retail: $214.64
Our Price: $199.94
In Stock
Electric A-frame jack has 2 toggle switches for operation. Jack has a retracted height of 9", an extended height of 28-1/2", and 19-1/2" of travel. Drop leg offers an extra 5-5/8" of lift. 7-way RV-style plug makes setup easy. tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight. Tongue
  • Travel Trailer
  • Teardrop Camper
  • Pop Up Camper
  • Bolt-On
  • Electric Jack
  • 3001 - 4000 lbs
  • Steel
  • A-Frame Jacks
  • 1 Jack
  • RAM

Dexter DX7.5L A-60 Brake Actuator - Weld On - Drum - 2" Ball - Primed - 7,500 lbs - DEX94FR

Our Price: $275.59
In Stock
Use this actuator to synchronize your trailer brakes with your tow-vehicle brakes. Over-center latch mechanism only engages when the actuator is fully seated on 2" hitch ball. Designed for ...
actuator is fully seated on hitch ball Aluminum master cylinder is better at reducing corrosion than cast steel master cylinders Primed finish Weld-on installation Manual lockout kit sold separately Made in
  • Surge Brake Actuator
  • Drum Brakes
  • 2 Inch Ball Coupler
  • 7500 lbs GTW
  • Weld-On
  • Farm Trailer
  • Construction Trailer
  • Boat Trailer
  • Travel Trailer
  • Utility Trailer
  • No Lockout
  • Dexter

Demco Hydraulic Trailer Brake Actuator - Drum Brakes - Zinc Plated - Adjustable Channel - 8,000 lbs - 8759121

Our Price: $273.69
Surge-type actuator features a corrosion-resistant composite master cylinder and durable zinc plating, making it perfect for marine applications. Adjustable channel lets you mount different coupler attachments (sold separately).
  • Surge Brake Actuator
  • Drum Brakes
  • Channel
  • 8000 lbs GTW
  • Bolt-On
  • Construction Trailer
  • Farm Trailer
  • No Lockout
  • Demco

Dexter DX Series Electric Over Hydraulic Brake Actuator for Disc Brakes - 1,600 psi - K71-651

Retail: $1,362.89
Our Price: $933.83
In Stock
Electric-hydraulic brake actuator works with your brake controller (sold separately) to activate your trailer's disc brakes. Vented housing releases heat and moisture. Enhanced wiring protection safeguards internal electronics. couplers Faster response time - activates when you apply brakes in tow vehicle, as opposed to when trailer pushes against hitch ball No need to manually lock out brakes when you back up Trailer brakes can be
  • Electric-Hydraulic Brake Actuator
  • Disc Brakes
  • Boat Trailer
  • Travel Trailer
  • Dexter

Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black - JET-5000

Our Price: $318.41
In Stock
Use this electric tongue jack to lift your trailer with the flip of a switch. The sturdy steel jack can handle up to 5,000 lbs. It has 18" of travel and a 5" drop leg for extra lift. LED lights on both sides boost visibility at night. Determine the Lift Capacity You Need in a Jack A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with
  • Travel Trailer
  • Teardrop Camper
  • Pop Up Camper
  • Bolt-On
  • Electric Jack
  • 4001 - 5000 lbs
  • Steel
  • A-Frame Jacks
  • 1 Jack
  • Stromberg Carlson

SnapPad HiWay 10 Jack Pads for HWH and Atwood Leveling Systems w/ 10" Round Jack Feet - Qty 4

Our Price: $239.80
In Stock
Perfect for Class A motorhomes with HWH and Atwood leveling systems, these rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area adds ...
Features: Heavy-duty rubber pads snap onto your Class A motorhome's HWH or Atwood leveling jacks to make leveling faster and easier Eliminates the need to crawl under your motorhome to position
  • 10 Inch Jack Foot
  • Permanent
  • Round Foot
  • 4 Jack Pads
  • Black
  • SnapPad

Replacement Motor Mounting Bolt for Atwood 5th Wheel Landing Gear - 1/4" x 3-1/2"

Our Price: $4.18
In Stock
Replaces 1 machined motor mounting bolt for Atwood standard-duty, heavy-duty, and super-duty fifth-wheel landing gear. Lock washer (AT86111) sold separately.Features: Replaces 1 machined motor mounting bolt for Atwood 5th-wheel landing gear Inserts through the motor and attaches to the landing gear plate Works in conjunction with lock washer (AT86111 -
  • Trailer Jack
  • Camper Jacks
  • Bolts
  • Mounting Hardware
  • Atwood

Top Wind Trailer Jack Handle - JP02-010

Retail: $19.88
Our Price: $18.92
In Stock
Topwind Handle Fits Atwood, Shelby, and Fulton Jacks Jack Replacement Handle by Atwood
  • Camper Jacks
  • Trailer Jack
  • Topwind
  • Handles and Cranks
  • Redline