LED lighting redefined sleek, IP68 sealed, rugged, lifetime warrantied fixtures for work trucks, emergency vehicles, marine use, trailers and more.Features: Powered by 6 high efficiency LEDs Frosted acrylic lens for even light distribution Parallel mounting clips sold separately Specs: Measurements: 6-1/2" x 2/1/4" x1-1/2" LEDs: 6 Color: Red Lens Voltage: 9 to 14 volts DC Mounting: Fits standard mounting holes Wiring: Tripole
12-5/8" Long x 1" tall. Waterproof trailer light serves 3 functions: brake, tail, turn. Low-profile light fits in tight spaces. Smoked lens works great with black-out style on vehicles or trailers. 3-Wire pigtail. 9 LEDs. ... Features: Oblong trailer taillight serves 3 functions Stop lightTaillight Turn signal light Smoked lens works great with blacked-out style on vehicles or trailers Sonically sealed, waterproof housing and lens unit is submersible LED lights are highly efficient, durable, and long-lasting Durable polycarbonate lens and housing Mounts on surface with built-in black flange - hardware not included 3-Wire pigtail DOT compliant Specs: Overall dimensions: 12-5/8" long x 1" tall x 1/2" deep Mounting holes: 11-3/4" apart on center Weight:.44 lbs Diodes: 9 Voltage: 12V Amp draw: Tail: 0.01A Stop: 0.2A Lifetime LED warranty
4" Round waterproof LED trailer light with 24 diodes provides stop, turn, tail, and back-up functions. GloLight lens creates a solid panel of light. Recessed mount with grommet (sold separately). ... Features: Combination trailer light serves 4 functions Stop light, turn signal light, taillight, and reverse light GloLight lens creates a solid light pattern with a smooth appearance Sonically sealed, waterproof construction is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Molded plastic housing and durable acrylic lens Red lens over red LEDs White lens over white leds for back-up function Compatible with 12V DC systems Recessed mount with required grommet (sold separately) Weathertight connections accept 3-pin and 2-pin plugs Specs: Dimensions: 4-5/16" diameter x 1-5/8" thick Diodes: 24 Power draw at 12V: Stop/turn light: 0.316 amps Taillight: 0.150 amps Backup: 0.30 amps Lifetime warranty on LEDS Innovative GloLight Design This red LED light serves as a trailer taillight with stop, turn, and tail functions.
7-1/8" Incandescent transit light acts as a brake and taillight. Mounts to the surface of your bus or truck and hardwires to your vehicle. The included gasket creates a weathertight seal against moisture.Features: Round stop/taillight Incandescent bulb is easy to replace Red screw-on lens Steel housing Foam gasket creates a weathertight seal Surface mount - hardware not included Power lead and ground wire connect to your vehicle Specs: Dimensions: 7-1/8" diameter x 2-3/16" thick Distance between mounting holes (center on center): 6-1/4" Compatible with 12V DC systems Bulb type: 1157 Power draw at 12.8 volts: Stop: 2.4 amps Tail: 0.5 amps 3-Year warranty
7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. ... Features: Oval trailer taillight serves 4 functions Stop lightTaillight Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights GloLight lens creates a solid circle of light with a smooth appearance Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows improved heat distribution and thinner construction LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Clear lens with red and white LEDs Red LEDs for taillight White LEDs for backup light Mounts on surface of trailer with built-in black flange - hardware not included Hardwired with 2 female PL-3 plugs for standard connections DOT compliant Specs: Overall dimensions: 7-1/2" wide x 3-1/4" tall x 3/4" deep Light face dimensions: 6-1/2" wide x 2-1/4" tall Diodes: 22 Power draw at 12.8 volts: 0.46 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
4" Round. Waterproof trailer light serves 3 functions: brake, tail, and turn. Smooth X-shape crosses the face of the light. Recessed mount with grommet (sold separately). ... A 3-prong pigtail (A45PB or A47PB - sold separately) is required to connect this light to your vehicle or trailer. You will also need a rubber grommet (A45GB - sold separately) to install your taillight. An optional mounting bracket is also available (BK45BB - sold separately) to make it easier to mount the light on your trailer.
This GloLight transit taillight is bright, easy to see, and just looks cool. It seals out moisture with the weathertight gasket. Mounts on the surface of your vehicle with screws (not included). ... Features: Halo taillight is bright and easy to see, day or night Inner ring glows for taillight Outer ring flashes for turn signal and brightens for brake light Weather resistant Included gasket creates weathertight seal Built-in reflex reflector White LEDs with red lens More efficient and durable than incandescent bulbs Durable polycarbonate housing and acrylic lens Surface mount Hardware not included AMP-style plug DOT compliant Meets FMVSS 108 and CMVSS requirements Specs: Dimensions: 7" wide x 7" tall x 1-5/8" thick Compatible with 12V DC systems Diodes: 32 Power draw at 12V: Tail: 0.135 amps Stop/turn: 0.340 amps Lifetime warranty on LEDs
7-1/2" x 3-5/16". Waterproof, 2-function trailer taillight acts as tail and reverse light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Accepts industry-standard 3-prong plug.Features: Oval trailer taillight serves 2 functions Taillight Reverse light GloLight lens creates a solid circle of light with a smooth appearance Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear lens over white and red LEDs Polycarbonate housing and acrylic lens Mounts on surface of trailer with built-in flange - hardware not included Accepts industry-standard 3-prong plug (sold separately) Specs: Quantity: 1 utility light Dimensions: 7-1/2" wide x 3-5/16" tall x 1-1/8" deep Diodes: 22 Power draw at 12.8 volts: 0.50 amps Lifetime warranty on LEDs Innovative GloLight Design This white LED light serves as an exterior light for your trailer, RV, or other application.
5-1/2" Diameter x 1-1/2". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Accepts industry-standard 3-prong plug.Features: Round trailer taillight serves 3 functions Turn signal lightTaillight Brake light GloLight lens creates a solid light pattern with a smooth appearance Outer band of LEDs functions as taillight Center red LEDs act as turn signal and brake light Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows improved heat distribution and thinner construction LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Clear lens over red LEDs Polycarbonate housing and acrylic lens Mounts on surface of trailer with built-in flange - hardware not included Requires 4-1/2" hole in trailer for flange to sit flush Accepts industry-standard 3-prong plug (sold separately) DOT compliant Meets FMVSS 108 and CMVSS requirements for automotive lighting Specs: Quantity: 1 combination taillight Overall dimensions: 5-1/2" diameter x 1-1/2" deep Light face diameter: 4" Diodes: 21 Power draw at 12.8 volts: Taillight: 0.145 amps Stop/turn light: 0.375 amps Lifetime warranty on LEDs Innovative GloLight Design This red LED light serves as a trailer taillight with stop, turn, and tail functions.
16" x 1-5/16" x 11/16". Low-profile LED trailer taillight serves as a stop, turn, and taillight for trailers over 80" wide. Surface mount - hardware not included. 3-Wire design.Features: Low-profile trailer taillight serves 3 functions on trailers over 80" wide Stop Turn Tail Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Clear lens over red LEDs Compatible with 12V DC systems Surface mount on trailer - hardware not included 3-Wire design hardwires to trailer FMVSS complaint for trailers over 80" wide Specs: Overall dimensions: 16" long x 1-5/16" tall x 11/16" deep Distance between mounting holes (center on center): 14-1/2" Diodes: 11 Power draw at 12.8V: 0.012 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-9/16" x 3-5/16" Oval. Waterproof LED trailer taillights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. ... Features: Oval LED trailer taillights serves 3 functions when properly mounted Brake lightTailLight Turn Signal Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Red lens over white LEDs Polycarbonate lens and housing Recessed mount with included grommets Includes industry-standard 3-prong plugs for connections Specs: Quantity: 2 trailer taillights Overall dimensions: 7-9/16" long x 3-5/16" tall x 1-3/4" thick Light face: 6-1/2" long x 2-5/16" tall Diodes: 12 6 LEDs per light Powerdraw at 12.8V: Stop/turn: 0.161 amps Tail: 0.007 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-11/16" x 3-5/8" Oval. LED trailer taillight with 5 hardwired leads serves 4 main light functions. LumenX optics creates a solid panel of light. Integrated voltage regulation. ... Features: Oval trailer taillight serves 4 functions Works as a turn signal, taillight, brake light, and backup light Cyclops-style design integrates back-up light into taillight LumenX optics creates a solid panel of light that illuminates the entire lens LEDs make great replacements for incandescent lights Can last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Regulated design ensures consistent light output and prevents overheating Red and clear lens over red and white LEDs Compatible with 12V DC systems Recessed mount with built-in plastic flange Mounts in any 360-degree position Accepts industry-standard AMP-style plug (sold separately) DOT compliant Meets FMVSS 108 requirements for automotive lighting Made in the USA Specs: Dimensions: 7-11/16" long x 3-5/8" tall x 1-3/8" deep Diodes: 7 Power draw at 12V Input voltage: 9V - 16V DC 10-Year limited warranty
7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.Features: Red, oblong light functions as stop, turn, and taillight Sealed, waterproof housing and lens unit Corrosion resistant 10 Super LEDs (Light Emitting Diode) Flange mounts with four mounting holes in the center of each side Wiring design contains lead wires and a ground wire to mount to all surfaces Wire functions: Red: Turn signal and brake Black: Taillight White: Ground Specs: Overall dimensions: 7-9/16" long x 3-5/16" tall x 3/4" thick Distance between mounting holes (center to center): 7" long x 2-3/4" tall Diodes: 10 Power draw at 12.8V: Stop/turn: 0.243 amps Tail: 0.046 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
8-11/16" Low-profile, LED taillight displays brake, tail, and turn signals on the passenger side of your RV. It mounts to the surface of the motorhome, with a lens that snaps on so it's easy to replace the bulb. ... Features: Low-profile rectangular RV brake, turn, and taillight White LEDs with red lens More efficient and durable than incandescent bulbs Black ABS plastic base and snap-on lens Surface mount Hardware not included 3-Wire pigtail White wire for ground Black wire for taillight Green wire for stop/turn signal light DOT compliant Meets FMVSS 108 and CMVSS 108 requirements Specs: Configuration: passenger side Driver side: RVSTLB61 (sold separately) Light dimensions: 8-11/16" long x 3-3/16" tall x 2-1/8" thick Compatible with 12V DC systems Diodes: 9 Power draw at 12.8V: Stop/turn: 0.243 amps Tail: 0.046 amps Lifetime warranty on LEDs
15" x 1-3/8". Low-profile LED taillight serves 3 funtions on trailers over 80" wide. Durable polycarbonate housing and lens. Surface mount - hardware not included. 3-Wire design.Features: LED taillight serves 3 functions on trailers more than 80" wide Stop, turn and taillight Thinline Series has a low-profile so that light can fit in tight spaces Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Clear lens over red LEDs Compatible with 12V DC systems Surface mount to trailer - hardware not included 3-Wire design hardwires to trailer DOT compliant Specs: Dimensions: 15" Long x 1-3/8" tall x 5/8" deep Distance between mounting holes (center on center): 14-1/8" Diodes: 11 Power draw at 12.8V Stop/turn signal: 0.35 amps Taillight: 0.022 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
5-1/2" Diameter round. Waterproof trailer light serves 3 functions: stop, turn, and tail. Durable polycarbonate lens and housing. Mounts on trailer with built-in flange. Accepts standard 3-prong plug.Features: Red round trailer light serves 3 functions on trailers Stop lightTaillight Turn signal light Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens over white LEDs Mounts on trailer with built-in flange - hardware not included Requires a 4-1/2" round hole for installation Accepts industry standard 3-prong plug (A45PB and A47PB - both sold separately) DOT compliant Specs: Dimensions: 5-1/2" diameter x 1-15/16" thick Distance between mounting holes (center on center): 4-1/4" Diodes: 10 Power draw at 12.8V: Stop/turn: 0.413 amps Tail: 0.0.26 amps LIfetime warranty on LEDs Manufacturer Cross Reference Light will work as an exact replacement for: Truck Lite # 44326R Grote # 53292 Peterson # M418R-2 Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
10-1/8" x 3-1/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface with built-in flange - hardware not included. 5-Wire pigtail. 14 Diodes.Features: Low-profile trailer taillight serves 4 functions Stop lightTaillight Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for taillight Clear lens with white LEDs for backup light Compatible with 12V DC systems Mounts on surface of trailer with built-in flange - hardware not included Snap-on, stainless steel trim ring (A68SSB) sold separately 5-Wire pigtail White wires are for ground connections Brown wire for backup light Red wire for brake light Yellow wire for turn signal Black wire for taillight DOT compliant Specs: Overall dimensions: 10-1/8" long x 3-1/16" tall x 1/2" deep Taillight dimensions: 6-3/4" long x 2-1/8" tall Backup light dimensions: 2-1/2" long x 2-1/8" tall Mounting holes: 9-11/16" Apart on center (horizontal) 2-5/8" Apart on center (vertical) Diodes: 14 Power draw at 12.8 volts: Stop/turn signal light: 0.35 amps Taillight: 0.05 amps Backup light: 0.3 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
6" Oval. 4-Function waterproof light acts as brake, tail, turn, and backup light. Recessed mount with built-in flange.Features: Low-profile trailer taillight serves 4 functions Stop lightTaillight Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for taillight Clear lens with white LEDs for backup light Recessed mount with built-in flange Accepts industry-standard plugs (sold separately) DOT compliant Specs: Quantity: 1 light Number of diodes: 8 Power draw at 12.8 volts: High intensity function: 0.14 amps Brake/Turn/Taillight: 0.11 amps to 0.13 amps Reverse function: 0.24 amps to 0.3 amps Distance between mounting holes (center to center): 7-1/4" Lifetime warranty on LEDs
7-9/16" x 3-5/16" Oval. Waterproof 3-function LED trailer taillight acts as a brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.Features: Oval trailer taillight serves 3 functions Stop lightTaillight Turn signal light Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows improved heat distribution and thinner construction LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Clear lens with red LEDs Compatible with 12V DC systems Mounts on surface of trailer with built-in flange - hardware not included Meets FMVSS 108 requirements in any 360 degree position 3-Wire design Specs: Overall dimensions: 7-9/16" long x 3-5/16" tall x 3/4" deep Mounting hole dimensions (center on center): 7" long x 2-3/4" tall Diodes: 10 Power draw at 12.8 volts: Stop/Turn: 0.243 amps Tail: 0.46 amps Quantity: 1 clearance/marker light Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. 4-Wire pigtail. 16 Diodes.Features: Oval trailer taillight serves 4 functions Stop lightTaillight Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows improved heat distribution and thinner construction LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for taillight Clear lens with white LEDs for backup light Mounts on surface of trailer with built-in black flange - hardware not included 4-Wire pigtail White wire for ground Brown wire for backup light Red wire for brake light Black wire for taillight DOT compliant Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting Specs: Overall dimensions: 7-1/2" wide x 3-1/4" tall x 3/4" deep Light face dimensions: 6-1/2" wide x 2-1/4" tall Wire length: 8" Diodes: 16 Power draw at 12.8 volts: Stop/turn light: 0.265 amps Taillight: 0.24 amps Backup light: 0.3 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
7-9/16" x 3-5/16" Oval. Waterproof LED trailer light provides brake, tail, and turn signal functions. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design with 0.180 male bullets.Features: Oval LED trailer light provides stop, tail, and turn signal functions Sonically sealed, waterproof housing and lens unit is submersible LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate housing and lens Compatible with 12V DC systems Surface mount to trailer with built-in flange - no cutout needed 3-Wire design with 0.180 male bullets DOT compliant Specs: Dimensions: 7-9/16" long x 3-5/16" tall x 3/4" thick Diodes: 10 Power draw at 12V: Stop/turn: 0.243 amps Tail: 0.046 amps Limited lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Rectangle LED trailer light with 20 diodes provides stop, turn, tail, and backup light functions. Surface mounts to trailer. 4-Wire pigtail.Features: Rectangular LED trailer light works as a stop, turn, tail, and reverse light functions LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide better light with less power output No bulbs to replace - no brittle filaments Red and clear lens with white LEDs Compatible with 12V DC systems Mounts on surface of trailer - hardware not included 4-Wire design DOT compliant Specs: Dimensions: 9-5/8" long x 7" tall x 5/8" deep Diodes: 20 Wire length: 7" Weight: 0.95 lbs 1-Year limited warranty
20-1/2" Long x 1" tall. Waterproof trailer light serves 3 functions: brake, tail, turn. Low-profile Thinline light fits in tight spaces. Surface mount on 19-5/8" centers - hardware not included. 15 LEDs. ... Features: Trailer taillight serves 3 functions Stop lightTaillight Turn signal light Sonically sealed, waterproof housing and lens unit is submersible Thinline Series has a low profile so that light can fit in tight spaces Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Polycarbonate lens and housing Red lens Hardwire with separate ground wire Mounts on surface of trailer - hardware not included DOT compliant Specs: Dimensions: 20-1/2" long x 1" tall x 3/4" deep Mounting holes: 19-5/8" apart on center Diodes: 15 Power draw at 12.8 volts: Stop light: 0.2 amps Taillight: 0.01 amps Wire configuration: White: ground Black: taillight Red: turn signal Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
10-1/8" x 3-1/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface with built-in flange - hardware not included. 4-Wire pigtail. 14 Diodes.Features: Low-profile trailer taillight serves 4 functions Stop lightTaillight Turn signal light Built-in backup light eliminates the need to cut holes in your trailer for 2 lights Sonically sealed, waterproof housing and lens unit is submersible Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Last 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable polycarbonate lens and housing Red lens set inside white lens with red and white LEDs Red lens with red LEDs for taillight Clear lens with white LEDs for backup light Compatible with 12V DC systems Mounts on surface of trailer with built-in flange - hardware not included Snap-on, stainless steel trim ring (A68SSB) sold separately 4-Wire pigtail White wire for ground Brown wire for backup light Red wire for brake light and turn signal Black wire for taillight DOT compliant Specs: Overall dimensions: 10-1/8" long x 3-1/16" tall x 1/2" deep Taillight dimensions: 6-3/4" long x 2-1/8" tall Backup light dimensions: 2-1/2" long x 2-1/8" tall Mounting holes: 9-11/16" Apart on center (horizontal) 2-5/8" Apart on center (vertical) Diodes: 14 Power draw at 12.8 volts: Stop/turn signal light: 0.35 amps Taillight: 0.05 amps Backup light: 0.3 amps Lifetime warranty on LEDs Sonically Sealed, Waterproof Trailer Light The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer.
Filters
