... Black powder coated aluminum housing is rustproof. Impact-resistant polycarbonate lens. Pedestal mount with included hardware. 6 Diodes.Features: Rectangular work light provides bright white light for industrial, agricultural, and recreational applications Flood beam is great for seeing out in front of you and off to both sides Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Lasts 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable, water-resistant construction Black powder coated die-cast aluminum housing is rustproof Tough polycarbonate lens is impact resistant IP67 rated for protection against dust and moisture Compatible with 12V and 24V DC systems Easy installation Single-bolt, pedastal-style bracket and hardware included for installation Adjustable bracket lets you adjust the angle of the light as needed 16" Long, 16-gauge power lead and ground wire Specs: Light output: Effective lumen output: 640 lumens Raw lumen output: 1,200 lumens Diodes: 6 Light dimensions: 6-1/4" long x 1-13/16" tall x 2" thick Input voltage: 9-36V DC Lifetime warranty on LEDs Raw Lumens vs.
... Black powder coated aluminum housing is rustproof. Impact-resistant polycarbonate lens. Pedestal mount with included hardware. 6 Diodes.Features: Square work light provides bright white light for industrial, agricultural, and recreational applications Flood beam is great for seeing out in front of you and off to both sides Durable surface-mount technology (SMT) construction of LED circuit board Better withstands shock and vibration Allows for improved heat distribution LEDs make great replacements for incandescent lights Lasts 50 times longer More efficient - provide brighter light with less power output No bulbs to replace - no brittle filaments Durable, water-resistant construction Black powder coated die-cast aluminum housing is rustproof Tough polycarbonate lens is impact resistant IP65 rated for protection against dust and moisture Compatible with 12V DC systems Easy installation Single-bolt, pedastal-style bracket and hardware included for installation Adjustable bracket lets you adjust the angle of the light as needed 16" Long, 16-gauge power lead and ground wire Specs: Light output: Effective lumen output: 780 lumens Raw lumen output: 1,800 lumens Diodes: 6 Light dimensions: 3-1/4" long x 3" tall x 2-3/4" thick Power draw: Lead wire length: 16" At 12.8V DC: 1.4 amps Input voltage: 12.8V DC Lifetime warranty on LEDs Raw Lumens vs.
Square-tube jack is ideal for supporting heavy pontoon or bowrider trailers. Footplate is more stable than caster wheels. Total lift is 15-3/8" of screw travel plus 13-3/4" of drop leg travel. Clear zinc finish resists rust.Features: Supports, lifts, and lowers your trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion with clear zinc finish Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting bracket and hardware Specs: Application: trailer frames up to 5" tall x 3" wide Lift capacity: 2,500 lbs Bracket height: Retracted: 7-1/4" Extended: 22-5/8" Total lift: 29-1/8" Screw travel : 15-3/8" Drop leg travel : 13-3/4" Inner tube width: 2" Outer tube width: 2-1/4" Mounting bracket dimensions: 6-1/2" long x 6-1/2" wide Handle radius: 7-7/8" Adjustment hole spacing on drop leg: 3-3/8" from center of hole to center of hole 3-1/2" Between center of hole on bottom and center of nearest hole 1-Year warranty How to Determine the Lift Capacity You Need in a Jack A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle.
4-1/16" LED light displays brake, tail, and turn signals on your trailer. It's a single-face pedestal mount and hardwires to your trailer.Features: Round, rear-facing brake, tail, and turn signal light Waterproof White LEDs with red lens More efficient and durable than incandescent bulbs Black die-casting steel housing Postmount installation Includes hardware Included pigtail hardwires to trailer DOT compliant Specs: Dimensions: 4-1/16" diameter x 1-3/4" thick Diodes: 21 Compatible with 12V DC systems Lifetime warranty on LEDs
This jack's footplate is more stable than that caster wheel and block you're using. Premium zinc finish has a 500-hour salt spray rating - great for trailers near saltwater. Total lift includes a 13-1/2" drop leg. Made in the USA.Features: Supports, lifts, and lowers your trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting hardware Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 2,500 lbs Bracket height: Retracted: 10-1/4" Extended: 25-1/4" Total lift: 28-1/2" Screw travel : 15" Drop leg travel : 13-1/2" Overall height (when retracted): 25-1/4" Footplate dimensions: 7" long x 4" wide 1-Year limited warranty You'll Need More than Just Zinc to Fight Rust The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time.
This might be just what you need if you have clearance issues along your trailer frame that won't let you swing a jack up. Wheel swivels 360 degrees. Premium zinc finish with a 500-hour salt spray rating is ideal for boat trailers. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Fits great on trailers with short or cluttered tongues where a swing-up jack is a no-go Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Bolts around trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Capacity: 1,000 lbs Bracket height: Retracted: 10" Extended: 25" Screw travel : 15" Inner tube diameter: 1-3/4" Outer tube diameter: 2" Wheel diameter: 6" 3-Year limited warranty Built for Setups that Make a Swivel Jack Impractical to Use Most boat trailer jacks are designed so that you can stow them parallel to your tongue when you're towing.
With twice the lift of other jacks in its class, this one is ideal for trailers that sit high off the ground. Footplate stabilizes better than a caster wheel. Marine-grade, zinc finish is perfect for boat trailers. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Reduces time spent cranking when the drop leg is released Drop leg helps bridge the gap to the ground Fits great on trailers with short or cluttered tongues where a swing-up jack is a no-go Provides more stability than wheeled jacks Footplate spreads the weight more evenly Minimizes sinking in soft ground Resists rust and corrosion, even in areas with salt Premium TUFFPLATE zinc finish has a 500-hour salt spray rating Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Bolts around trailer frame Includes mounting hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 2,500 lbs Bracket height: Retracted: 8-3/16" Extended: 38-3/16" Total lift: 30" Screw travel : 15" Drop leg travel : 15" Adjustment hole spacing on drop leg: 4-7/16" center on center Clearance: 17" from mounting bracket to top of jack Handle swing radius: 6-1/8" Inner tube diameter: 2" Outer tube diameter: 2-1/4" 2-Year limited warranty Designed for Trailers that Sit High Off the Ground Unlike most boat trailer jacks out there, this Dutton-Lainson jack has a drop leg that will make using it faster.
... Front-facing amber lens and rear-facing red lens. Durable die-cast steel housing. Single postmount. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Pedestal-Mount Light Pedestal mount trailer lights install standing up from the mounting point. And mounting hardware, typically one or two bolts, is used to secure the light to the trailer.
Just pull the easy-to-access pin on this jack to drop the entire jack tube down for quick, easy adjustment. No drop leg needed. Seven height settings offer up to 12" of drop. Topwind handle allows for an additional 15-1/2" of screw travel.Instead, just remove the clip from the quick-release pin and grab the built-in, easy-to-grip handle. With a firm grip on the jack post, pull on the pin handle and then rotate it 180 degrees. Lower the post to the desired position and rotate the pin handle back to lock the outer tube in place.
... Front-facing amber lens and rear-facing red lens. Durable die-cast steel housing. Single postmount. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Pedestal-Mount Light Pedestal mount trailer lights install standing up from the mounting point. And mounting hardware, typically one or two bolts, is used to secure the light to the trailer.
... Incandescent work light provides bright white light. Shockproof rubber housing. Glass lens. Postmount with adjustable steel-plated bracket. 2-Wire design. (1) 4411 bulb.Features: Incandescent work light provides bright white light Shockproof, black rubber housing protects bulb Incandescent bulb can be easily replaced Adjustable bracket moves vertically and horizontally for a great range of motion Compatible with 12V DC systems Postmount with adjustable steel bracket Fits 5/16" mountingpost Two-wire design includes lead and ground wires Specs: Dimensions: 4-3/4" diameter x 2-15/16" thick Light stands 5-13/16" tall when mounted Bulb tpe: 4411 Power draw at 12.8V: 2.8 amps Wire length: 6" 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Peterson # 507
JR Products U-Post regulator bracket mounts 1 LP gas regulator on threaded tank rod.Features: Mounts 1 LP gas regulator on threaded tank rod Includes (1) bracket and regulator screws
... Front-facing amber lens and rear-facing red lens. Durable die-cast steel housing. Single postmount. 3-Wire design.The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board. Pedestal-Mount Light Pedestal mount trailer lights install standing up from the mounting point. And mounting hardware, typically one or two bolts, is used to secure the light to the trailer.
Mount this system to your trailer jack with included U-bolts. Breakaway system brings your single-, double-, or triple-axle trailer to a stop should it become disconnected while towing. ... Features: Makes sure your trailer safely stops if it separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Mounts to the outside of your trailer's frame or to your jack post Side-loading case provides easy access to battery Mounts to jack post with included U-bolts or to trailer frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Rubber O-ring helps keep water out of the box Includes breakaway switch, battery box, wiring, and a 5-amp hour, lead-acid battery Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailers with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Breakaway cable length: 48" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 14-1/2" Battery box dimensions: 5" long x 3-3/4" wide x 3-3/8" tall Battery box mounting hole spacing: From center to center vertically: 2-7/8" From center to center horizontally: 4-1/2" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
... Includes a charger that maintains battery so you're always ready for an emergency and U-bolts so you can mount it to your trailer jack.Features: Makes sure your trailer safely stops if it separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Automatically charges battery with the built-in charger when connected to your vehicle Mounts to the outside of your trailer's frame or to your jack post Side-loading case provides easy access to battery Mounts to jack post with included U-bolts or to trailer frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Rubber O-ring helps keep water out of the box Includes breakaway switch, battery box, wiring, and a 5-amp hour, lead-acid battery Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailer with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Charger lead wire length: 47" Breakaway cable length: 48" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 12" Battery box dimensions: 5" long x 5-1/4" wide x 3-3/8" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
This universal wiring kit lets you install an electric brake controller (sold separately) in your vehicle and a 7-way connector for your trailer lights at the same time. Plugs into the existing 4-way on your vehicle.Features: Universal kit includes wiring and hardware required for installation of a trailer brake controller (sold separately) Designed for use on a vehicle with an existing 4-way flat trailer connector 20' Long duplex cable houses (2) 10-gauge wires Connect 1 wire to the blue wire on the brake controller Connect 1 wire to the positive post on the vehicle's battery via the included 40-amp circuit breaker Pre-wired 7-way trailer connector mounts easily at rear of vehicle with mounting bracket (sold separately) Plugs into existing 4-way trailer connector on vehicle 30-Amp and 40-amp circuit breakers protect your vehicle's electrical system by preventing overload Quick-splice wiring connector lets you easily connect your brake controller's stop signal wire to your brake pedal switch Heavy-duty replacement flasher prevents your turn signals from blinking too fast Ring terminals attach to wires so you can connect leads to circuit breakers and battery posts (5) #10 Ring terminals (2) 3/8" Ring terminals 4 Butt connectors for joining wires (8) 8-1/2" Long cable ties let you secure loose wires Limited 1-year warranty Notes: No existing 4-pole connector: If your vehicle does not already have a 4-pole flat trailer connector installed, the etrailer.com application guide can be used to find the easy-to-install connector made specifically for your vehicle.
Perfect for marine and other off-the-beaten-path applications, this rugged-looking square swivel jack has an articulating footplate that helps it get a grip on uneven surfaces. Black powder coat and zinc fight rust and corrosion. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly Pull-pin lets you position jack quickly Protective cover houses the pull-pin and swivel components Offers stability on uneven surfaces with fully articulating footplate Far more stability than either a caster wheel or a traditional footplate Resists rust and corrosion, inside and out Top layer is a matte black powder coat finish to protect from corrosion and harsh UV rays Base layer is a premium TUFFPLATE zinc finish with a 500-hour salt spray rating Drain holes at bottom of inner post prevent water buildup Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Incorporates a grease zerk for easy maintenance No need to remove and re-lubricate gears Complements your rugged trailer with an edgy, off-road look of its own Bolts around trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 2,000 lbs Bracket height (from bottom of footplate to top hole of bracket): Retracted: 16-5/8" Retracted Extended: 28-5/8" Extended Screw travel : 12" Pull pin diameter: 1/2" Tube diameter: 2-1/2" Handle radius: 6-1/8" 3-Year limited warranty Swivels Smoothly and Easily There really isn't much to the pull-pin on a typical swivel jack.
... Incandescent trailer light functions as a stop, turn, and tail signal. Single face design has red lens. Single post pedestal mount. 2-Wire design. (1) 2057 bulb.Features: Round incandescent trailer light serves 3 functions Stop, turn, and tail Single face design has single red lens Incandescent 2057 bulb can be easily replaced Durable polycarbonate snap-on lens and housing Compatible with 12V DC systems Single post pedestal mount 2-Wire design includes power lead and ground wire Specs: Dimensions: 4-5/16" diameter x 2-3/8" thick Bolt diameter: 1/2" Bulb type: 2057 bulb Power draw at 12.8V: Stop/turn: 2.3 amps Tail: 1.2 amps 3-Year warranty Manufacturer Cross Reference Light will work as an exact replacement for: Wesbar # 2623 Truck Lite # 70310R Grote # 55220 Peterson # 313-2 Bargman # 30-17-001
This boat trailer jack has a black powder coat finish on the outside and a premium, 500-hour salt spray rated zinc finish on the inside for full rust protection. Caster swivels 360 degrees to make it easy to maneuver your trailer. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly J-bolt handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Caster turns a full 360 degrees Resists rust and corrosion, inside and out Outer tubing has a matte black powder coat finish to protect from corrosion and harsh UV rays Inner tubing has a premium TUFFPLATE zinc finish with a 500-hour salt spray rating Drain holes at bottom of inner post prevent water buildup Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes, or other accessories mounted on your trailer Sidewind handle has a comfortable, cushioned, ergonomic grip Spoked wheel design adds a little stylish flair Incorporates grease zerks to make routine maintenance easy Creates a stylish flair with spoked wheel design Bolts around trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 1,500 lbs Bracket height Retracted: 16-5/8" Extended: 28-5/8" Screw travel : 12" Pull pin diameter: 1/2" Outer tube diameter: 2-1/4" Handle radius: 6-1/8" Wheel dimensions: 8" diameter x 2-1/4" wide 3-Year limited warranty You'll Need More than Just Zinc to Fight Rust The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time.
The extra-wide caster wheel offers great surface contact when rolling ofer gravel or soft ground, and turns 360 degrees for easy maneuverability. Black powder coat and zinc provide rust protection, which is great for boat trailers. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly Pull-pin handle lets you position jack quickly Makes it easy to move your trailer in tight spaces Extra-wide caster wheel turns a full 360 degrees Resists rust and corrosion, inside and out Top layer is a matte black powder coat finish to protect from corrosion and harsh UV rays Base layer is a premium TUFFPLATE zinc finish with a 500-hour salt spray rating Drain holes at bottom of inner post prevent water buildup Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Complements your rugged trailer with an edgy, off-road look of its own Bolts around your trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailer frames up to 3" wide x 5" tall Lift capacity: 1,500 lbs Bracket height: Retracted: 16-5/8" Extended: 28-5/8" Screw travel : 12" Overall length: Retracted: 29" Extended: 41-1/2" Wheel dimensions: 8" diameter x 3-5/16" wide Pull pin diameter: 1/2" Outer tube diameter: 2-1/4" Handle radius: 6-1/8" 3-Year limited warranty You'll Need More than Just Zinc to Fight Rust The simple truth is that salt can be highly corrosive to metal when exposure lasts for an extended period of time.
Perfect for heavy-duty marine and other off-the-beaten-path trailer applications, this rugged-looking swivel jack has an extra-wide wheel for great stability and turns 360 degrees to make it easy to maneuver your trailer. Made in the USA.Features: Supports, lifts, and lowers your boat or recreational trailer Swings up and down smoothly Pull-pin handle lets you position jack quickly Protective handle cover houses the pull-pin and swivel components Makes it easy to move your trailer in tight spaces Extra-wide caster wheel turns a full 360 degrees Resists rust and corrosion, inside and out Outer tubing has a matte black powder coat to protect from corrosion and harsh UV rays Inner tubing has a premium TUFFPLATE zinc finish with a 500-hour salt spray rating Drain holes at bottom of inner post prevent water buildup Lasts for years thanks to durable steel construction Avoids winch posts, tool boxes or other accessories mounted on your trailer Sidewind handle lets you crank jack without your hand getting smashed Complements your rugged trailer with an edgy, off-road look of its own Bolts around your trailer frame Includes mounting bracket and hardware Made in the USA Specs: Application: trailers frames up to 3" tall x 4" wide Lift capacity: 1,700 lbs Bracket height (from bottom of wheel to top hole of bracket): Retracted: 16-5/8" Extended: 28-5/8" Screw travel : 12" Pull pin diameter: 1/2" Outer tube diameter: 2-1/2" Handle radius: 6-1/8" Wheel dimensions: 8" diameter x 3-5/16" wide 3-Year limited warranty Protective Cover to House the Pull-Pin and Swivel Components There really isn't much to pull-pin on a typical swivel jack.
Replaces the top-loading battery box that came with your Curt Soft Trac II trailer breakaway kit. The built-in mounting bracket allows for a no-drill installation on your trailer's frame or jack post. Weather-resistant polyethylene construction.Features: Replaces the battery case that came with your Curt Soft Trac II trailer breakaway kit (C52028 or C52026) Top-loading case is easy to access from above Built-in mounting bracket offers easy installation - no drilling required Clamps onto your trailer frame or around your jack post May also be welded to the trailer frame Lockable with a padlock (sold separately) Weather-resistant polyethylene construction protects your battery from moisture and debris Specs: Dimensions: 5" long x 3-7/8" wide x 3-1/4" tall 1-Year limited warranty
The battery case in this breakaway kit clamps onto your trailer's frame or jack post and includes a trickle charger. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected from your tow vehicle.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge your battery Clamps around your trailer's frame or jack post Top-loading case provides easy access to battery from above Breakaway switch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes battery, charger, battery box, breakaway switch, wiring, installation hardware, and breakaway cable Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailers with electric brakes Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Breakaway cable length: 48" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 46-1/2" Charger lead wire length: 17" Battery box dimensions: 5" long x 4" wide x 3-1/4" tall Trailer jack mounting hole diameter: 2-1/2" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Filters
