LED tester lets you easily check the battery's charge. Built-in charger pulls just enough power from your vehicle when your trailer is hooked up to make sure your breakawaybattery stays charged and ready to go in case a disconnect ever occurs.Features: Makes sure your trailer safely stops if it ever separates from your vehicle Activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge your battery Lets you test battery status with the push of a button Mounts on the outside of your trailer's frame Side-loading case allows easy access to the battery Switch installs on your trailer's frame with self-tapping screws (sold separately) Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Wiring diagram is printed on the battery box lid Rubber O-ring in the lid helps keep water out of the box Drain holes in the bottom of the box help with venting and letting condensation drain Kit includes breakaway switch, charger, 5-amp-hour battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 1 amp Battery: Voltage: 12V Type: Lead-acid Capacity: 5 amp-hours Battery box dimensions: 3-3/4" long x 6" wide x 5" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
LED tester lets you easily check the battery's charge. The built-in charger in this kit keeps your battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a stop should it become disconnected from your vehicle.If it's green, it means the battery is fully charged. Yellow shows it's currently charging, and red indicates a low battery. Quick Tips: When you store your trailer, be sure to keep the pin plugged into the breakaway switch.
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. ... Features: Makes sure your trailer safely stops if it separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Lead-acid battery works great in high temperatures Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge the battery Lets you test battery status with the push of a button Mounts on the inside of your trailer's frame Top-loading case provides easy access to the battery Switch installs on your trailer's frame with included self-tapping screws Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes breakaway switch, charger, Lead-acid battery, battery box, wiring, and mounting hardware Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, or triple-axle trailers with electric brakes Battery: Voltage: 12V Type: sealed lead-acid Capacity: 5 amp-hours Breakaway cable length: 48" Breakaway switch: Dimensions: 2-1/8" long x 2-1/2" wide Lead wire length: 14-1/2" Charger lead wire length: 36" Battery box dimensions: 6-1/2" long x 4-3/4" wide x 5" tall Battery box mounting hole spacing: From center-to-center vertically: 1-1/4" From center-to-center horizontally: 6" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Lead-acid batteries require no maintenance, which is why we love this kit. The built-in charger keeps the battery charged and ready to bring your single-, tandem-, or triple-axle trailer to a complete stop. ... Features: Makes sure your trailer safely stops if it separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Lead-acid battery works great in high temperatures Automatically charges battery with the built-in charger when connected to your vehicle Won't overcharge the battery Lets you test battery status with the push of a button Mounts on the outside of your trailer's frame Side-loading case provides easy access to the battery Switch installs on your trailer's frame with included self-tapping screws Protects battery from rain and debris with durable, plastic case Lid can be secured with padlock (sold separately) to deter battery theft Includes breakaway switch, charger, Lead-acid battery, battery box, wiring, and mounting hardware Department of Transportation (DOT) compliant Specs: Application: single-, tandem-, and triple-axle trailers with electric brakes Battery capacity: Voltage:12V Type: sealed lead-acid Capacity: 5 amp-hours Breakaway cable length: 51" Breakaway switch: Dimensions: 4-3/8" long x 1-1/2" wide Lead wire length: 24" Charger lead wire length: 12" Battery box dimensions: 6" long x 3-3/4" wide x 5" tall Battery case mounting holes: From center to center vertically: 3-1/4" From center to center horizontally: 5-1/2" 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
This complete breakawaykit brings your trailer to a safe stop by activating the brakes if the trailer completely separates from the tow vehicle. Built-in charger automatically charges the included battery while your trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Brakes receive signal to activate when cable detaches from switch Built-in charger automatically charges battery while connected to tow vehicle Battery box can be mounted on your trailer frame so you can open it from either above or the side Durable, plastic case protects the battery from the elements Rubber O-ring seal keeps out moisture 12-Volt, sealed lead-acid battery is rechargeable Switch and battery box install on trailer frame - drilling required Hardware not included Convenient wiring diagram is printed on the box Kit includes breakaway switch, 0.5-amp charger, 5-amp-hour battery, battery box, and wiring Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 0.5 amps Battery: Capacity: 5 amp-hours Voltage: 12V Battery box dimensions: 5-1/4" long x 5" wide x 3-1/2" tall 1-Year limited warranty
If your trailer breaks away from your tow vehicle, your brakes won't work unless they have power. This kit adds a battery and switch to keep the brakes working, and it's required by law on most trailers with EOH disc brakes.Specs Application: single-, tandem-, and triple-axle trailers Compatibility: Deutsche Hydrapro Alpha G1000 and G1600 Required by DOT for most trailers with EOH systems Battery: Type: 12V sealed AGM deep-cycle battery Capacity: 10 amp-hours Recharge method: 12V tow vehicle circuit Breakaway Switch: 2-wire normally open circuit Activates actuator when pin is pulled Construction: Battery case: injection-molded plastic Switch housing: molded polymer with stainless steel hardware Leads: 16-gauge color-coded wiring Kit Contents: 10 Ah AGM batteryBreakaway switch with pin 2-amp charging circuit LED battery tester Installation Notes: Mount the battery box on the trailer frame and connect the yellow wire to the actuator's breakaway circuit.
Unit flashes the lights on your single- or tandem-axle trailer while also activating its brakes if it disconnects from your vehicle. This way, not only will your trailer stop, but the flashing lights will also alert others on the road to the danger.Features: Makes sure your trailer safely stops if it ever separates from your vehicle When the pin gets pulled from the switch, a signal is shot back to your trailer brakes to activate Boosts safety by also flashing your trailer's signal lights if disconnect occurs ICU system activates when breakaway cable detaches Automatically charges battery with built-in charger when connected to your vehicle Won't overcharge the battery Lets you test battery status with the push of a button Mounts on the outside of your trailer's frame Side-loading case provides easy access to battery Self-tapping screws are sold separately Breakaway switch installs on your trailer's frame with self-tapping screws Protects the battery from rain and debris with durable, plastic case Rubber O-ring around lid helps keep water out of the box Wiring diagram is printed on the battery box lid Keeps wires neat with included wire loom Includes breakaway switch, charger, battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric brakes Breakaway cable length: 48" Charger amperage: 0.5 amps Battery: Voltage: 12V Type: sealed lead acid Capacity: 5 amp-hours Battery box dimensions: 3-3/4" long x 6" wide x 5" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Use with your Dexter electric-over-hydraulic brake actuator to bring your single- or tandem-axle trailer to a stop should it become disconnected from your tow vehicle. System includes charger that maintains battery.A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
Bring your single-, double-, or triple-axle trailer to a stop should it become disconnected while towing. Includes a charger that maintains battery so you're always ready for an emergency and U-bolts so you can mount it to your trailer jack.A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
The battery case in this breakawaykit clamps onto your trailer's frame or jack post and includes a trickle charger. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected from your tow vehicle.A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
The battery case in this breakawaykit can clamp around your trailer frame or jack post. Kit brings your single-, double-, or triple-axle trailer to a stop should it become disconnected.A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
Mount this system to your trailer jack with included U-bolts. Breakaway system brings your single-, double-, or triple-axle trailer to a stop should it become disconnected while towing. ... A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
Simple, push-to-test button lets you check the charge on the battery in this breakawaykit. Complete kit brings your trailer to a safe stop if it separates from your vehicle. Built-in charger automatically charges battery while trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Brakes receive signal to activate when cable detaches from switch Built-in charger automatically charges battery while connected to tow vehicle Push-to-test button lets you check the battery's state of charge LED lights indicate current battery status Green = fully charged Yellow = charging Red = recharge needed Top-loading case is easy to access from above Durable, plastic case protects the battery from the elements Rubber O-ring seal keeps out moisture 12-Volt, sealed lead-acid battery is rechargeable Wire loom neatly contains and protects wires Switch and battery box install on trailer frame - drilling required Hardware not included Convenient wiring diagram is printed on box Kit includes breakaway switch, 1-amp charger, 5-amp-hour battery, battery box, wiring, and wire loom Specs: Application: single-axle or tandem-axle trailers with electric braking systems Breakaway cable length: 4' Charger amperage: 1 amp Battery: Capacity: 5 amp-hours Voltage: 12V Battery box dimensions: 4-3/4" long x 6" wide x 4-7/8" tall 1-Year limited warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
You're wiring a trailer with electric brakes and safety isn't optional. This breakawaykit gives the trailer with a backup plan. If it comes loose, the battery triggers the brakes. ... Built-In Charger: Keeps battery ready between trips. Weather-Resistant Housing: Helps shield battery and wiring from road spray. Features to know about BreakawayKit with Everything Included This TowSmart ProClass kit gives you the full setup for trailerbreakaway protection.
This battery charger pulls just enough power from your vehicle when your trailer is hooked up to make sure your breakawaybattery stays charged and ready to go in case a disconnect ever occurs. ... Features: Charges your breakawaybattery when your trailer is connected to the tow vehicle Works with 12V, 5-amp batteries Fits inside your breakawaybattery box Constructed of impact-resistant plastic Specs: Splice-in wire length: 18" Battery connection wire length: 10" Limited 90-day warranty Note: A breakaway system is required by law in most states for trailers that are equipped with electric brakes and have a GTW of at least 3,000 lbs.
Use this trailerbreakawaykit with your Dexter BrakeRite EHB or BrakeRite II electric-over-hydraulic actuator to bring your trailer to a stop should it become disconnected from your tow vehicle. ... A breakaway system needs to be able to apply the trailer brakes fully for at least 15 minutes. In general, the heavier your trailer, the higher amperage battery you'll need for the breakaway.
Replaces the side-loading battery box that came with your Curt Soft Trac I trailerbreakawaykit. The lockable lid screws down and has built-in rubber gaskets that help to keep water out. ... Features: Replaces the battery case that came with your Curt Soft Trac I breakawaykit (C52040 or C52041) Side-loading case is easy to access from the side Lockable lid deters theft Fastens using (4) 1/2" x 2-1/2" screws (not included) Locks using a padlock (sold separately) Weather-resistant polyethylene construction protects your battery from moisture and debris Rubber gaskets inside the lid keep water out Bolt-on installation Specs: Dimensions: 5" long x 3-3/4" wide x 3-3/8" tall 1-Year limited warranty
Replaces the 10-amp-hour battery from your Bright Way trailerbreakawaykit.Features: Replaces the 10-amp-hour battery from your Bright Way trailerbreakawaykit Fits model 2311 Sealed lead-acid battery Specs: Amperage: 10 amp-hours Voltage: 12V Quantity: 1 battery
Replaces the 12-volt battery charger that came with your Bright Way breakawaykit. This charger wires to your tow vehicle's power source and to the battery in your breakawaykit.Features: Replaces the charger that came with your Bright Way trailerbreakawaykit Works with models 2339, 2345, 2354 Can be added onto model 2337 Uses your tow vehicle as a power source to charge the trailerbreakawaybattery Securely installs inside battery box - hardware not included Wires to battery, breakaway switch, and 12V vehicle power source Specs: Charger amperage: 0.5 amps Wire size: 16 gauge
Replaces the 12-volt battery that came with your Curt breakawaykit. This battery powers your trailer's electric brakes in the event that your trailer accidently disconnects from your tow vehicle.Features: Sealed lead-acid battery replaces the battery that came with your trailer breakway kit Works with Curt Soft Trac I (C52040 or C52041) and Soft Trac II (C52028 or C52026) breakawaykits 5 Amp-hours 12 Volt
Replaces the 5-amp-hour battery from your Bright Way trailerbreakawaykit.Features: Replaces the 5-amp-hour battery from your Bright Way trailerbreakawaykit Fits models 2308, 2326, 2336, 2337, 2339, 2345, 2346, and 2354 Sealed lead-acid battery Specs: Amperage: 5 amp-hours Voltage: 12V Quantity: 1 battery
Durable plastic box keeps the battery and charger of your trailerbreakaway system protected from the elements. Sturdy mounting bracket included.Features: Replacement battery case guards your breakawaybattery and charger from the elements Designed for use with Tekonsha trailerbreakawaykits Heavy-duty polymer construction resists corrosion Sturdy, clamp-on bracket lets you mount case on your trailer tongue or jack post Specs: Overall box dimensions including lid: 5-15/16" long x 5-1/16" tall x 3-3/8" deep Mounting bracket dimensions: 3-1/2" long x 4-1/2" deep Mounting hole diameter: 2-1/2" Distance between mounting holes (center to center): 2-1/4"
Replaces the top-loading battery box that came with your Curt Soft Trac II trailerbreakawaykit. The built-in mounting bracket allows for a no-drill installation on your trailer's frame or jack post. ... Features: Replaces the battery case that came with your Curt Soft Trac II trailerbreakawaykit (C52028 or C52026) Top-loading case is easy to access from above Built-in mounting bracket offers easy installation - no drilling required Clamps onto your trailer frame or around your jack post May also be welded to the trailer frame Lockable with a padlock (sold separately) Weather-resistant polyethylene construction protects your battery from moisture and debris Specs: Dimensions: 5" long x 3-7/8" wide x 3-1/4" tall 1-Year limited warranty
This breakawaykit brings your trailer to a safe stop by applying the brakes if the trailer completely separates from the tow vehicle. Built-in charger automatically charges battery (sold separately) while your trailer is connected.Features: Breakaway system activates your trailer's electric brakes if the trailer disconnects from the tow vehicle Cable detaches from switch to apply the brakes Requires 12V, 5-amp-hour battery (3801250 - sold separately) Built-in charger automatically charges battery while connected to tow vehicle Battery box attaches to trailer in either a side-load or top-load configuration Includes convenient wiring diagram Durable, plastic case protects the battery (sold separately) from the elements Rubber O-ring seal keeps out moisture Switch and battery box install on trailer frame - drilling required Hardware not included Kit includes breakaway switch, 0.5-amp charger, battery box, and wiring Specs: Application: one-axle or two-axle trailers with electric braking systems Charger amperage: 0.5 amps Breakaway cable: 4' long
Filters
