Replacement Clamp-On Battery Box for Tekonsha Trailer Breakaway Kit

See what our Experts say about this Tekonsha Accessories and Parts

• Can Trailer Breakaway Battery Be Mounted on It's Side
  If you are using a breakaway kit like the Hopkins Engager Trailer BreakAway Kit # 20099 that features a sealed battery in an enclosure then you can mount it sideways if that is a better mounting solution on your trailer. We do often see trailers with their breakaway battery installed in this way. If your kit does not use a sealed battery or if it does not have a protective case for the battery you might want to check the manufacturer's instructions for any cautions about how that particular...
  view full answer...
• Replacement Breakaway Battery Box for Battery Dimensions 5.94 x 3.86 x 3.86-Inches
  Based on your dimensions it sounds like you need a box for a trailer breakaway battery. All of the replacement breakaway battery boxes we offer can be seen on the link provided. For example, the inside of part # TK2018 measures 5-3/8 L 3-1/16 W 4-3/4-inches H. This box also has small divider inside as shown in the linked photo. It seems your battery is a bit larger in at least one dimension than most that we offer, so if needed you can use a box for a larger battery, such as one of those...
  view full answer...
  
• Internal Dimensions of Tekonsha Breakaway Battery Box
  We do have a battery box though the Curt battery box you referenced does not have the correct length for your battery, which is just over 5-3/4" long. Instead, you will need the Replacement Clamp-On Battery Box for Tekonsha Trailer Breakaway Kit # TK2018 because it measures 5-15/16" long x 5-1/16" tall x 3-3/8" wide. I have added a link to a video review of this battery box for you to check out as well.
  view full answer...
  
• What are the Inner Dimensions of the Replacement Clamp-On Battery Box # TK2018
  The Replacement Clamp-On Battery Box, # TK2018, is going to be too small for your batteries. It measures approximately 5-1/4 inches across, 3 inches wide, and 4-7/8 inches tall on the inside. Instead take a look at the more cost effective box # DW03009. The inner dimensions are 10-3/4 inches long, 7 inches wide, and 8-1/4 inches deep. Installation hardware is also included with this box.
  view full answer...
• Recommended Battery Box for 6 Long x 2-1/2 Wide x 3-3/4 Tall Battery
  Based off the measurements you provided, the Replacement Clamp-On Battery Box for Tekonsha Trailer Breakaway Kit # TK2018 will fit your existing breakaway battery. It's right at 5-15/16" long x 3-3/8" wide x 5" tall so it will be a tight fit, but it's the only box we have available that fits all 3 of the measurements.
  view full answer...
• Need a Battery Box to Fit a Battery Sized 4.5L x 2.8125H x 3.375 W
  I think the Replacement Clamp-On Battery Box # TK2018 would work well for you. This box has inner dimensions of 5-1/4 inches across, 3 inches wide, and 4-7/8 inches tall. The # TN65117 that you referenced wouldn't quite be long enough for you.
  view full answer...
  
• Breakaway Battery With F1 Terminals and Box
  Good News! the Curt # C52023 battery has F1 Posts. If you must have F1 size terminal connectors you can find them online be searching for: 0.032" x 0.187" Female Terminals. Usually a standard 16-14 gauge connector like the Deka # DW01899-1 will fit just fine. For a battery case I would recommend the Tekonsha # TK2018 box. It is water tight and has several mounting choices.
  view full answer...

Do you have a question about this Accessories and Part?